Pasted

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd090]
[    0.000000] Linux version 6.6.59 (matteo@turbo) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28021-e29bc67f9d) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Wed Nov  6 10:41:20 2024
[    0.000000] Machine model: Bananapi BPI-R4
[    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004304ffff (320 KiB) nomap non-reusable secmon@43000000
[    0.000000] OF: reserved mem: 0x0000000047cc0000..0x0000000047dbffff (1024 KiB) nomap non-reusable wmcpu-reserved@47cc0000
[    0.000000] OF: reserved mem: 0x000000004f600000..0x000000004f63ffff (256 KiB) nomap non-reusable wo-emi@4f600000
[    0.000000] OF: reserved mem: 0x000000004f640000..0x000000004f67ffff (256 KiB) nomap non-reusable wo-emi@4f640000
[    0.000000] OF: reserved mem: 0x000000004f680000..0x000000004f6bffff (256 KiB) nomap non-reusable wo-emi@4f680000
[    0.000000] OF: reserved mem: 0x000000004f700000..0x000000004fefffff (8192 KiB) nomap non-reusable wo-data@4f700000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004304ffff]
[    0.000000]   node   0: [mem 0x0000000043050000-0x0000000047cbffff]
[    0.000000]   node   0: [mem 0x0000000047cc0000-0x0000000047dbffff]
[    0.000000]   node   0: [mem 0x0000000047dc0000-0x000000004f5fffff]
[    0.000000]   node   0: [mem 0x000000004f600000-0x000000004f6bffff]
[    0.000000]   node   0: [mem 0x000000004f6c0000-0x000000004f6fffff]
[    0.000000]   node   0: [mem 0x000000004f700000-0x000000004fefffff]
[    0.000000]   node   0: [mem 0x000000004ff00000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.4
[    0.000000] percpu: Embedded 18 pages/cpu s35048 r8192 d30488 u73728
[    0.000000] pcpu-alloc: s35048 r8192 d30488 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 rootwait
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fa7dd000-0x00000000fe7dd000] (64MB)
[    0.000000] Memory: 4023924K/4194304K available (8768K kernel code, 990K rwdata, 2556K rodata, 448K init, 289K bss, 170380K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 416 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[    0.000060] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[    0.000067] pid_max: default: 32768 minimum: 301
[    0.002153] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002167] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.003643] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.003924] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.004001] rcu: Hierarchical SRCU implementation.
[    0.004003] rcu:     Max phase no-delay instances is 1000.
[    0.004295] smp: Bringing up secondary CPUs ...
[    0.004511] Detected VIPT I-cache on CPU1
[    0.004546] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[    0.004567] CPU1: Booted secondary processor 0x0000000001 [0x411fd090]
[    0.004816] Detected VIPT I-cache on CPU2
[    0.004836] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[    0.004846] CPU2: Booted secondary processor 0x0000000002 [0x411fd090]
[    0.005072] Detected VIPT I-cache on CPU3
[    0.005093] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[    0.005104] CPU3: Booted secondary processor 0x0000000003 [0x411fd090]
[    0.005131] smp: Brought up 1 node, 4 CPUs
[    0.005135] SMP: Total of 4 processors activated.
[    0.005138] CPU features: detected: 32-bit EL0 Support
[    0.005140] CPU features: detected: CRC32 instructions
[    0.005158] spectre-bhb mitigation disabled by compile time option
[    0.005171] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.005175] CPU: All CPU(s) started at EL2
[    0.005176] alternatives: applying system-wide alternatives
[    0.008669] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.008680] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.009622] pinctrl core: initialized pinctrl subsystem
[    0.010448] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.010964] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.011064] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.011161] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.011451] thermal_sys: Registered thermal governor 'fair_share'
[    0.011453] thermal_sys: Registered thermal governor 'bang_bang'
[    0.011456] thermal_sys: Registered thermal governor 'step_wise'
[    0.011458] thermal_sys: Registered thermal governor 'user_space'
[    0.011500] ASID allocator initialised with 65536 entries
[    0.012048] pstore: Using crash dump compression: deflate
[    0.012053] printk: console [ramoops-1] enabled
[    0.012289] pstore: Registered ramoops as persistent store backend
[    0.012293] ramoops: using 0x10000@0x42ff0000, ecc: 0
[    0.019780] Modules: 29456 pages in range for non-PLT usage
[    0.019788] Modules: 520976 pages in range for PLT usage
[    0.020618] cryptd: max_cpu_qlen set to 1000
[    0.022193] SCSI subsystem initialized
[    0.022266] libata version 3.00 loaded.
[    0.023145] clocksource: Switched to clocksource arch_sys_counter
[    0.024897] NET: Registered PF_INET protocol family
[    0.025032] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.027382] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.027405] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.027414] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.027515] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.027924] TCP: Hash tables configured (established 32768 bind 32768)
[    0.028261] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.028389] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.028440] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.028650] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.028685] PCI: CLS 0 bytes, default 64
[    0.029533] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.033099] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.033105] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.051417] jitterentropy: Initialization failed with host not compliant with requirements: 9
[    0.052349] mtk-xsphy soc:xphy@11e10000: failed to get ref_clk(id-1)
[    0.052932] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[    0.052949] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[    0.052962] mtk-pcie-gen3 11280000.pcie:       IO 0x0020000000..0x00201fffff -> 0x0020000000
[    0.052975] mtk-pcie-gen3 11280000.pcie:      MEM 0x0020200000..0x0027ffffff -> 0x0020200000
[    0.053067] mtk-pcie-gen3 11290000.pcie: host bridge /soc/pcie@11290000 ranges:
[    0.053077] mtk-pcie-gen3 11290000.pcie: Parsing ranges property...
[    0.053087] mtk-pcie-gen3 11290000.pcie:       IO 0x0028000000..0x00281fffff -> 0x0028000000
[    0.053096] mtk-pcie-gen3 11290000.pcie:      MEM 0x0028200000..0x002fffffff -> 0x0028200000
[    0.053114] /soc/pcie@11290000: Failed to get clk index: 0 ret: -517
[    0.053123] mtk-pcie-gen3 11290000.pcie: failed to get clocks
[    0.053205] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges:
[    0.053216] mtk-pcie-gen3 11300000.pcie: Parsing ranges property...
[    0.053225] mtk-pcie-gen3 11300000.pcie:       IO 0x0030000000..0x00301fffff -> 0x0030000000
[    0.053235] mtk-pcie-gen3 11300000.pcie:      MEM 0x0030200000..0x0037ffffff -> 0x0030200000
[    0.053250] /soc/pcie@11300000: Failed to get clk index: 0 ret: -517
[    0.053259] mtk-pcie-gen3 11300000.pcie: failed to get clocks
[    0.053334] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges:
[    0.053343] mtk-pcie-gen3 11310000.pcie: Parsing ranges property...
[    0.053353] mtk-pcie-gen3 11310000.pcie:       IO 0x0038000000..0x00381fffff -> 0x0038000000
[    0.053362] mtk-pcie-gen3 11310000.pcie:      MEM 0x0038200000..0x003fffffff -> 0x0038200000
[    0.053377] /soc/pcie@11310000: Failed to get clk index: 0 ret: -517
[    0.053384] mtk-pcie-gen3 11310000.pcie: failed to get clocks
[    0.057849] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.058646] printk: console [ttyS0] disabled
[    0.078918] 11000000.serial: ttyS0 at MMIO 0x11000000 (irq = 99, base_baud = 2500000) is a ST16650V2
[    0.078953] printk: console [ttyS0] enabled
[    1.091357] 11000100.serial: ttyS1 at MMIO 0x11000100 (irq = 100, base_baud = 2500000) is a ST16650V2
[    1.121222] 11000200.serial: ttyS2 at MMIO 0x11000200 (irq = 101, base_baud = 2500000) is a ST16650V2
[    1.133174] loop: module loaded
[    1.137656] spi-nand spi0.0: Winbond SPI NAND was found.
[    1.142972] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[    1.151273] 2 fixed-partitions partitions found on MTD device spi0.0
[    1.157670] OF: Bad cell count for /soc/spi@11007000/spi_nand@0/partitions
[    1.164543] OF: Bad cell count for /soc/spi@11007000/spi_nand@0/partitions
[    1.171524] Creating 2 MTD partitions on "spi0.0":
[    1.176310] 0x000000000000-0x000000200000 : "bl2"
[    1.182430] 0x000000200000-0x000008000000 : "ubi"
[    1.261095] ubi0: default fastmap pool size: 50
[    1.265639] ubi0: default fastmap WL pool size: 25
[    1.270418] ubi0: attaching mtd1
[    2.093413] ubi0: scanning is finished
[    2.106810] ubi0: attached mtd1 (name "ubi", size 126 MiB)
[    2.112291] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    2.119165] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    2.125943] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    2.132891] ubi0: good PEBs: 1008, bad PEBs: 0, corrupted PEBs: 0
[    2.138974] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[    2.146185] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1697192243
[    2.155304] ubi0: available PEBs: 105, total reserved PEBs: 903, PEBs reserved for bad PEB handling: 20
[    2.164688] ubi0: background thread "ubi_bgt0d" started, PID 242
[    2.165393] block ubiblock0_1: created from ubi0:1(rootfs)
[    2.176167] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
[    2.314684] i2c_dev: i2c /dev entries driver
[    2.322098] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[    2.330200] mtk-cpufreq mtk-cpufreq: failed to initialize dvfs info for cpu0
[    2.337765] mtk-msdc 11230000.mmc: Got CD GPIO
[    2.337943] NET: Registered PF_INET6 protocol family
[    2.347586] Segment Routing with IPv6
[    2.351251] In-situ OAM (IOAM) with IPv6
[    2.355221] NET: Registered PF_PACKET protocol family
[    2.360382] 8021q: 802.1Q VLAN Support v1.8
[    2.377182] phy phy-soc:[email protected]: type_sw - reg 0x218, index 0
[    2.384374] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[    2.391687] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[    2.397959] mtk-pcie-gen3 11280000.pcie:       IO 0x0020000000..0x00201fffff -> 0x0020000000
[    2.400697] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.406391] mtk-pcie-gen3 11280000.pcie:      MEM 0x0020200000..0x0027ffffff -> 0x0020200000
[    2.417616] mmc0: new high speed SDXC card at address aaaa
[    2.429478] mmcblk0: mmc0:aaaa SN64G 59.5 GiB
[    2.436966] Alternate GPT is invalid, using primary GPT.
[    2.442285]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    2.753166] mtk-pcie-gen3 11280000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[    2.761974] mtk-pcie-gen3: probe of 11280000.pcie failed with error -110
[    2.769005] mtk-pcie-gen3 11290000.pcie: host bridge /soc/pcie@11290000 ranges:
[    2.776324] mtk-pcie-gen3 11290000.pcie: Parsing ranges property...
[    2.782590] mtk-pcie-gen3 11290000.pcie:       IO 0x0028000000..0x00281fffff -> 0x0028000000
[    2.791026] mtk-pcie-gen3 11290000.pcie:      MEM 0x0028200000..0x002fffffff -> 0x0028200000
[    3.133163] mtk-pcie-gen3 11290000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[    3.141944] mtk-pcie-gen3: probe of 11290000.pcie failed with error -110
[    3.148830] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges:
[    3.156141] mtk-pcie-gen3 11300000.pcie: Parsing ranges property...
[    3.162402] mtk-pcie-gen3 11300000.pcie:       IO 0x0030000000..0x00301fffff -> 0x0030000000
[    3.170836] mtk-pcie-gen3 11300000.pcie:      MEM 0x0030200000..0x0037ffffff -> 0x0030200000
[    3.513150] mtk-pcie-gen3 11300000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[    3.521929] mtk-pcie-gen3: probe of 11300000.pcie failed with error -110
[    3.528785] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges:
[    3.536093] mtk-pcie-gen3 11310000.pcie: Parsing ranges property...
[    3.542352] mtk-pcie-gen3 11310000.pcie:       IO 0x0038000000..0x00381fffff -> 0x0038000000
[    3.550784] mtk-pcie-gen3 11310000.pcie:      MEM 0x0038200000..0x003fffffff -> 0x0038200000
[    3.893148] mtk-pcie-gen3 11310000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[    3.901927] mtk-pcie-gen3: probe of 11310000.pcie failed with error -110
[    3.909410] FIT: Detected U-Boot 2024.10-OpenWrt-r28021-e29bc67f9d
[    3.915588] FIT: Selected configuration: "config-mt7988a-bananapi-bpi-r4" (OpenWrt bananapi_bpi-r4)
[    3.924631] FIT:           kernel sub-image 0x00001000..0x00594424 "kernel-1" (ARM64 OpenWrt Linux-6.6.59) 
[    3.934367] FIT:          flat_dt sub-image 0x00595000..0x005a0a15 "fdt-1" (ARM64 OpenWrt bananapi_bpi-r4 device tree blob) 
[    3.945581] FIT:          flat_dt sub-image 0x005a1000..0x005a1609 "fdt-mt7988a-bananapi-bpi-r4-emmc" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-emmc) 
[    3.961910] FIT:          flat_dt sub-image 0x005a2000..0x005a211c "fdt-mt7988a-bananapi-bpi-r4-rtc" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-rtc) 
[    3.978064] FIT:          flat_dt sub-image 0x005a3000..0x005a35c1 "fdt-mt7988a-bananapi-bpi-r4-sd" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-sd) 
[    3.994049] FIT:          flat_dt sub-image 0x005a4000..0x005a48f0 "fdt-mt7988a-bananapi-bpi-r4-wifi-mt7996a" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-wifi-mt7996a) 
[    4.011765] FIT:       filesystem sub-image 0x005a5000..0x00a47fff "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r4 rootfs) 
[    4.022603] block mmcblk0p7: mapped 1 uImage.FIT filesystem sub-image as /dev/fit0
[    4.030359] block mmcblk0p7: mapped remaining space as /dev/fitrw
[    4.164614] mtk_soc_eth 15100000.ethernet: generated random MAC address 65:74:68:25:64:00
[    4.177051] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc082600000, irq 106
[    4.186747] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc082600000, irq 106
[    4.196429] mtk_soc_eth 15100000.ethernet eth2: mediatek frame engine at 0xffffffc082600000, irq 106
[    4.287906] mt7530-mmio 15020000.switch: configuring for fixed/internal link mode
[    4.295416] mt7530-mmio 15020000.switch: Link is Up - 10Gbps/Full - flow control rx/tx
[    4.322171] mt7530-mmio 15020000.switch wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7988 PHY] (irq=115)
[    4.359866] mt7530-mmio 15020000.switch lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7988 PHY] (irq=116)
[    4.397530] mt7530-mmio 15020000.switch lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7988 PHY] (irq=117)
[    4.435800] mt7530-mmio 15020000.switch lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7988 PHY] (irq=118)
[    4.446805] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
[    4.453519] DSA: tree 0 setup
[    4.456770] clk: Disabling unused clocks
[    4.465907] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
[    4.473160] Freeing unused kernel memory: 448K
[    4.477638] Run /sbin/init as init process
[    4.481724]   with arguments:
[    4.484684]     /sbin/init
[    4.487380]   with environment:
[    4.490508]     HOME=/
[    4.492857]     TERM=linux
[    4.615940] init: Console is alive
[    4.619422] init: - watchdog -
[    4.901965] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.924464] usbcore: registered new interface driver usbfs
[    4.929976] usbcore: registered new interface driver hub
[    4.935329] usbcore: registered new device driver usb
[    4.940847] gpio_button_hotplug: loading out-of-tree module taints kernel.
[    4.950703] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator
[    4.958104] xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator
[    4.965999] xhci-mtk 11200000.usb: xHCI Host Controller
[    4.971224] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[    4.981685] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
[    4.990846] xhci-mtk 11200000.usb: irq 119, io mem 0x11200000
[    4.996672] xhci-mtk 11200000.usb: xHCI Host Controller
[    5.001889] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[    5.009280] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[    5.016593] hub 1-0:1.0: USB hub found
[    5.020349] hub 1-0:1.0: 1 port detected
[    5.024462] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.032739] hub 2-0:1.0: USB hub found
[    5.036551] hub 2-0:1.0: 1 port detected
[    5.042903] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.059834] init: - preinit -
[    5.273766] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/internal link mode
[    5.281915] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 10Gbps/Full - flow control rx/tx
[    5.301882] mt7530-mmio 15020000.switch lan1: configuring for phy/internal link mode
[    5.310813] mt7530-mmio 15020000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[    5.473155] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[    5.655915] hub 1-1:1.0: USB hub found
[    5.659836] hub 1-1:1.0: 5 ports detected
[    5.803324] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[    5.835835] hub 2-1:1.0: USB hub found
[    5.839746] hub 2-1:1.0: 4 ports detected
[    6.363180] usb 1-1.5: new high-speed USB device number 3 using xhci-mtk
[    6.633147] random: crng init done
[    9.767322] F2FS-fs (fitrw): Mounted with checkpoint version = 6147d0bd
[    9.775439] mount_root: switching to f2fs overlay
[    9.781319] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[    9.793054] urandom-seed: Seeding with /etc/urandom.seed
[    9.822326] mt7530-mmio 15020000.switch lan1: Link is Down
[    9.830881] procd: - early -
[    9.833818] procd: - watchdog -
[   10.358906] procd: - watchdog -
[   10.362390] procd: - ubus -
[   10.517774] procd: - init -
[   10.680502] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.704508] pca954x 1-0070: supply vdd not found, using dummy regulator
[   10.711726] i2c i2c-1: Added multiplexed i2c bus 2
[   10.716632] i2c i2c-1: Added multiplexed i2c bus 3
[   10.721493] i2c i2c-1: Added multiplexed i2c bus 4
[   10.726355] i2c i2c-1: Added multiplexed i2c bus 5
[   10.731139] pca954x 1-0070: registered 4 multiplexed busses for I2C switch pca9545
[   10.741681] crypto-safexcel 15600000.crypto: can't request region for resource [mem 0x15600000-0x1577ffff]
[   10.751351] crypto-safexcel 15600000.crypto: failed to get resource
[   10.757620] crypto-safexcel: probe of 15600000.crypto failed with error -16
[   10.767866] at24 2-0050: supply vcc not found, using dummy regulator
[   10.801436] urngd: v1.0.2 started.
[   10.806726] at24 2-0057: supply vcc not found, using dummy regulator
[   10.813664] at24 2-0057: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[   10.820795] Loading modules backported from Linux version v6.11.2-0-g7aa21fec187b
[   10.828328] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942
[   10.838983] sfp sfp1: Host maximum power 3.0W
[   10.843892] sfp sfp2: Host maximum power 3.0W
[   10.877141] PPP generic driver version 2.4.2
[   10.881847] NET: Registered PF_PPPOX protocol family
[   10.893572] kmodloader: done loading kernel modules from /etc/modules.d/*
[   12.382401] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[   12.404250] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/internal link mode
[   12.412366] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 10Gbps/Full - flow control rx/tx
[   15.162452] mt7530-mmio 15020000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[   15.163043] br-lan: port 1(lan1) entered blocking state
[   15.175943] br-lan: port 1(lan1) entered forwarding state
[   40.463356] sfp sfp2: please wait, module slow to respond
[   85.844179] sfp sfp2: module HUAWEI           MA5671A          rev 0000 sn 032VRJ10J2005285 dc 180112  
[   85.853597] mtk_soc_eth 15100000.ethernet eth1: switched to inband/2500base-x link mode
[   85.884080] hwmon hwmon2: temp1_input not attached to any thermal zone