Pasted

/*
Here's a code snippet to toggle the onboard LED of the Arduino GIGA R1 WiFi using a webserver. This code creates a simple webpage that has a button to turn on and off the LED.
 
When you upload this code to your Arduino GIGA R1 WiFi board and connect it to a Wi-Fi network, you should be able to access the webpage at the board's IP address. Simply click the "ON" or "OFF" button to toggle the LED on
*/
 
 
#include <WiFi.h>
 
// Replace with your network credentials
const char* ssid = "your_SSID";
const char* password = "your_PASSWORD";
 
WiFiServer server(80);
 
// Pin for the onboard LED
const int ledPin = 2;
 
void setup() {
  Serial.begin(115200);
  pinMode(ledPin, OUTPUT);
  digitalWrite(ledPin, LOW);
 
  // Connect to Wi-Fi network
  Serial.print("Connecting to ");
  Serial.println(ssid);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(1000);
    Serial.println("Connecting to WiFi...");
  }
 
  Serial.println("Connected to WiFi");
 
  // Start the server
  server.begin();
}
 
void loop() {
  WiFiClient client = server.available();  // Check for incoming clients
 
  if (client) {  // If a client connects
    Serial.println("New client connected");
    String currentLine = "";  // Make a String to hold incoming data
    while (client.connected()) {  // Loop while the client is connected
      if (client.available()) {  // If there's bytes to read from the client
        char c = client.read();  // Read a byte
        Serial.write(c);  // Print the byte to the serial monitor
        if (c == '\n') {  // If the byte is a newline character
          if (currentLine.length() == 0) {  // If the line is blank, this is the end of the client request
            client.println("HTTP/1.1 200 OK");
            client.println("Content-type:text/html");
            client.println("Connection: close");
            client.println();
            client.println("<html>");
            client.println("<head>");
            client.println("<title>LED Control</title>");
            client.println("</head>");
            client.println("<body>");
            client.println("<h1>Toggle LED</h1>");
            client.println("<p>Click the button below to toggle the LED on and off.</p>");
            client.println("<form method='get'>");
            client.println("<button name='LED' value='ON' type='submit'>ON</button>");
            client.println("<button name='LED' value='OFF' type='submit'>OFF</button>");
            client.println("</form>");
            client.println("</body>");
            client.println("</html>");
            break;
          } else {  // If the client request is not blank, add the character to the currentLine
            currentLine = "";
          }
        } else if (c != '\r') {  // If the byte is not a carriage return character, add it to the currentLine
          currentLine += c;
        }
 
        if (currentLine.endsWith("GET /?LED=ON")) {  // If the GET request is for turning on the LED
          digitalWrite(ledPin, HIGH);
        } else if (currentLine.endsWith("GET /?LED=OFF")) {  // If the GET request is for turning off the LED
          digitalWrite(ledPin, LOW);
        }
      }
    }
    // Close the connection
    client.stop();
    Serial.println("Client disconnected");
  }
}