Pasted

// lora receiverCallBack modified by HwThinker for TTGO Lora T-Deer-915MHz
 
#include <SPI.h>
#include <LoRa.h>
 
#define SCK     13    // GPIO5  -- lora SCK
#define MISO    12   // GPIO19 -- lora MISO
#define MOSI    11   // GPIO27 -- lora MOSI
#define SS      10   // GPIO18 -- lora CS
#define RST     9   // GPIO14 -- RESET (If Lora does not work, replace it with GPIO14)
#define DI0     2   // GPIO26 -- IRQ(Interrupt Request)
 
#define BAND    915E6
 
 
#define LED_EXTERNAL 3
int state = 0;
 
void setup() {
  pinMode(LED_EXTERNAL, OUTPUT);
  Serial.begin(115200);
  while (!Serial);
//  SPI.begin(SCK, MISO, MOSI, SS);
  LoRa.setPins(SS,RST,DI0);
  
  Serial.println("LoRa Receiver Callback");
 
  if (!LoRa.begin(BAND)) {
    Serial.println("Starting LoRa failed!");
    while (1);
  }
 
  Serial.println("LoRa Initial OK! Blinky 1.5 second");
  for (int i=0;i<15;i++) {
    digitalWrite(LED_EXTERNAL, digitalRead(LED_EXTERNAL) ? LOW : HIGH);
    delay(100);
  }
 
  // register the receive callback
  LoRa.onReceive(onReceive);
 
  // put the radio into receive mode
  LoRa.receive();
}
 
void loop() {
  // do nothing
}
 
void onReceive(int packetSize) {
  // received a packet
  Serial.print("Received packet '");
 
  // read packet
  for (int i = 0; i < packetSize; i++) {
    Serial.print((char)LoRa.read());
  }
 
  // print RSSI of packet
  Serial.print("' with RSSI ");
  Serial.println(LoRa.packetRssi());
    digitalWrite(LED_EXTERNAL, (state) ? HIGH : LOW);
  state = !state;
  //or   digitalWrite(LED_EXTERNAL, !digitalRead(LED_EXTERNAL));
}