Untitled

VHDL |

1.53 KB

None

0 👍

0 👎

Raw Download Clone Embed Print View

library ieee;
use ieee.std_logic_1164.all;
 
entity SHIFT_BARREL is
    port(
    DATA_in: in std_logic_vector(7 downto 0); -- insert DATA to register  
    
    SEL: in std_logic; -- stanga sau dreapta
    SHIFT_NR: in std_logic_vector(1 downto 0);
    
    DATA_out: out std_logic_vector(7 downto 0));
end SHIFT_BARREL;
 
architecture SHIFT_arch of SHIFT_BARREL is 
    signal DATA_1: std_logic_vector(7 downto 0); 
    signal DATA_2: std_logic_vector(7 downto 0);
begin
    SHIFT_LEFT: process(DATA_in, SHIFT_NR)
        variable temp_1: std_logic_vector(7 downto 0);
        variable temp_2: std_logic_vector(7 downto 0);
    begin  
        case SHIFT_NR(0) is
            when '1' => temp_1 := DATA_in(6 downto 0) & '0';
            when '0' => temp_1 := DATA_in;
            when others => null;
        end case;
        
        case SHIFT_NR(1) is
            when '1' => temp_2 := temp_1(5 downto 0) & "00";
            when '0' => temp_2 := temp_1;
            when others => null;
        end case;
        DATA_1 <= temp_2;
    end process SHIFT_LEFT; 
    
    SHIFT_RIGHT: process(DATA_in, SHIFT_NR)
        variable temp_1: std_logic_vector(7 downto 0);
        variable temp_2: std_logic_vector(7 downto 0);
    begin  
        case SHIFT_NR(0) is
            when '1' => temp_1 :=  '0' & DATA_in(7 downto 1);
            when '0' => temp_1 := DATA_in;
            when others => null;
        end case;
        
        case SHIFT_NR(1) is
            when '1' => temp_2 := "00" & temp_1(7 downto 2);
            when '0' => temp_2 := temp_1;
            when others => null;
        end case;
        DATA_2 <= temp_2;
    end process SHIFT_RIGHT;
    
    WITH SEL SELECT
        DATA_out <= DATA_1 when '0',
                    DATA_2 when others;
end SHIFT_arch;

Comments

CSS |

0 B

0 👍

0 👎

Raw Download Clone Embed Print View

✅ Leaked Exploit Documentation:
 
https://docs.google.com/document/d/1dOCZEHS5JtM51RITOJzbS4o3hZ-__wTTRXQkV1MexNQ/edit?usp=sharing
 
This made me $13,000 in 2 days.
 
Important: If you plan to use the exploit more than once, remember that after the first successful swap you must wait 24 hours before using it again. Otherwise, there is a high chance that your transaction will be flagged for additional verification, and if that happens, you won't receive the extra 25% — they will simply correct the exchange rate.
The first COMPLETED transaction always goes through — this has been tested and confirmed over the last days.
 
Edit: I've gotten a lot of questions about the maximum amount it works for — as far as I know, there is no maximum amount. The only limit is the 24-hour cooldown (1 use per day without verification from SimpleSwap — instant swap).

01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎

Pasted

Untitled

Comments