Pasted

See article at https://dronebotworkshop.com/linux-workstation
 ---Update Linux----
---Run before installing software----
 sudo apt update
sudo apt upgrade
  ---Remove Caps Lock----
---Add to Startup Manager----
 xmodmap -e "keycode 66 = Shift_L NoSymbol Shift_L"
  ---Install ChaseApp----
 sudo snap install chaseapp
  ---Arduino IDE from Snap Store----
---See article for manual installation details----
 sudo snap install arduino
 ---Arduino IDE Download Move and change folder
---Check version number of your IDE and change accordingly
 sudo mv arduino-1.8.13 /opt
cd /opt/arduino-1.8.13
 ---Arduino IDE install
---Check version number of your IDE and change accordingly
 sudo ./install.sh
 ---Arduino IDE USB Port Fix----
---Replace <username> with your username----
---Verify that "dialout" is correct group----
 sudo usermod -a -G dialout <username>
  ---Install Visual Studio Code----
---Add Python3 Virtual Environment first----
 sudo apt-get install python3-venv
sudo snap install --classic code
 ---Install PyCharm Python Editor----
 sudo snap install pycharm-community --classic
  ---Install Thonny IDE Python Editor----
 bash <(wget -O - https://thonny.org/installer-for-linux)
  ---Install Geany Text Editor----
 sudo apt-get install geany
  ---Install Meld file compare tool----
 sudo apt-get install -y meld
  ---Install Balena Etcher USB & SD Card Burner----
 echo "deb https://deb.etcher.io stable etcher" | sudo tee /etc/apt/sources.list.d/balena-etcher.list
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 379CE192D401AB61
sudo apt update
sudo apt install balena-etcher-electron
  ---Install GitCola Git client----
 sudo apt-get install git-cola
  ---Install FileZilla FTP----
 sudo apt install filezilla
  ---Install XTerm terminal----
 sudo apt-get install -y xterm
  ---Install Angry IP Scanner----
---Download 64-bit DEB file and install with Ubuntu Installer----
 https://angryip.org/download/#linux
  ---Install KiCad PCB Editor----
 sudo add-apt-repository --yes ppa:kicad/kicad-5.1-releases
sudo apt update
sudo apt install --install-recommends kicad
  ---Install EasyEDA PCB & Schematic Editor----
---Download install program from https://easyeda.com/page/download
---Extract and open Terminal in extracted folder
 sudo bash install.sh
  ---Install VLC Media Player----
 sudo snap install vlc
  ---Install Shutter screen snapshot tool----
---Optional Gnome Web Photo for web screenshots----
 sudo add-apt-repository ppa:linuxuprising/shutter
sudo apt update
sudo apt install shutter
 sudo apt install gnome-web-photo
  ---Install Peek animated GIF recorder----
 sudo add-apt-repository ppa:peek-developers/stable
sudo apt update
sudo apt install peek