Pasted

## PearPC Configuration File
 
##
## Start Resolution
##
## (clients that use video.x can change the resolution at runtime,
##  so this would be used only for starting up)
##
##  format:  "(width)x(height)x(depth)"
##      or   "(width)x(height)x(depth)@(frequency)"
##
##  depth can only be 15 or 32
##
##  default: "800x600x15"
##
 
ppc_start_resolution = "1024x768x32"
 
##
## Set this to non-zero for turning on fullscreen mode on startup.
##
 
ppc_start_full_screen = 0
 
##
## Redraw interval (in ms)
## must be between 10 and 500
##
## If you set this higher, PearPC will spend less time doing redraws 
## (and so run faster) but feel less responsive. You should adjust 
## this to your computer speed and personal preference.
##
 
redraw_interval_msec = 20
 
##
## Key codes
##
 
key_compose_dialog = "F11"
key_change_cd_0 = "none"
key_toggle_mouse_grab = "F12"
key_toggle_full_screen = "Alt+Return"
 
 
##
## Loader 
##
 
##
##  Boot method
##    this can be
##    1. "auto", prom will boot the first bootable partition found (default)
##    2. "select", prom will show you a list of bootable partitions
##    3. "force", prom will load and boot the local file prom_loadfile
##
 
prom_bootmethod = "select"
 
## Example of how to use "force":
 
#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"
 
##
##  bootargs: don't change unless you know what you are doing
##  machargs: set to "-v" to get a verbose startup
##
 
prom_env_bootargs = ""
#prom_env_machargs = "-v"
 
##
##  This is needed if you want to boot Mac OS X
##
prom_driver_graphic = "video.x"
 
## This will adjust the position of the initial page table (don't change)
 
#page_table_pa = 104857600
 
##
## CPU Config
##
##  Processor Version Register
##  Defaults to 0x00088302 (G3)
##  Set to 0x000c0201 to enable G4 emulation
##  Only change if you know want you are doing
##
 
cpu_pvr = 0x00088302
#cpu_pvr = 0x000c0201
 
 
##
## Main memory (default 128 MiB)
## must be >= 64 MiB
##
 
memory_size=0x20000000
 
##
## IO Devices
##
 
##
##  PCI IDE Config
##
##  Drive type will be set according to file extension:
##      .img: Harddisk (filesize must be multiple of 516096)
##      .iso: CD-Rom
##  Or you can override this by specifying the type via
##  pci_ide0_master_type / pci_ide0_slave_type
##
##  Valid drive types are:
##      hd:     A hdd image should be specified
##              e.g. "test/imgs/linux.img"
##      cdrom:      A cdrom image should be specified
##              For Linux or BeOS a cdrom device can be specified as well
##              e.g. "/dev/cdrom"
##      nativecdrom:    Platform dependant
##          Win (SPTI): drive letter, e.g. "d:\"
##          Win (ASPI): SCSI host adapter,target,lun e.g. "2,0,1"
##          BeOS (ATAPI): device path, e.g. "/dev/disk/ide/atapi/0/master/0/raw"
 
pci_ide0_master_installed = 1
pci_ide0_master_image = "jaguar/HardDisk.img"
pci_ide0_master_type = "hd"
 
pci_ide0_slave_installed = 0
pci_ide0_slave_image = "jaguar/macos8.dmg"
pci_ide0_slave_type = "cdrom"
 
pci_ide1_master_installed = 0
pci_ide1_master_image = "jaguar/cd2.img"
pci_ide1_master_type = "cdrom"
 
pci_ide1_slave_installed = 0
pci_ide1_slave_image = ""
pci_ide1_slave_type = "cdrom"
 
##
##  Network
##
##  Choose one of the cards
 
pci_3c90x_installed = 0
pci_3c90x_type = "tap"
pci_3c90x_interface = ""
pci_3c90x_mac = "de:ad:ca:fe:12:35"
 
pci_rtl8139_installed = 0
pci_rtl8139_type = "tap"
pci_rtl8139_interface = ""
pci_rtl8139_mac = "de:ad:ca:fe:12:34"
 
##
##  USB
##
pci_usb_installed = 0
 
##
##  NVRAM
##
nvram_file = "jaguar/nvram"