<6>[ 0.000000@0] Booting Linux on physical CPU 0x200<6>[ 0.000000@0] Initializing cgroup subsys cpu<6>[ 0.000000@0] Initializing cgroup subsys cpuacct<5>[ 0.000000@0] Linux version 3.10.33-gfa4a182-dirty (user@DroidBOX) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Wed Feb 3 12:09:36 CET 2016<4>[ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d<4>[ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache<6>[ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC<4>[ 0.000000@0] physical memory start address is 0x200000<6>[ 0.000000@0] reserved_end is 1d9fffff <6>[ 0.000000@0] <6>[ 0.000000@0] Total memory is 2046 MiB<6>[ 0.000000@0] Reserved low memory from 0x06000000 to 0x1d9fffff, size: 378 MiB <6>[ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)<6>[ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)<6>[ 0.000000@0] deinterlace0(high) : 0x7df00000 - 0x80000000 ( 33 MiB)<6>[ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB)<6>[ 0.000000@0] vdec0(low) : 0x09a00000 - 0x19a00000 (256 MiB)<6>[ 0.000000@0] ppmgr0(high) : 0x7bf00000 - 0x7df00000 ( 32 MiB)<6>[ 0.000000@0] vdin00(low) : 0x19a00000 - 0x1aa00000 ( 16 MiB)<6>[ 0.000000@0] vdin10(low) : 0x1aa00000 - 0x1ba00000 ( 16 MiB)<6>[ 0.000000@0] amlvideo20(low) : 0x1ba00000 - 0x1d200000 ( 24 MiB)<6>[ 0.000000@0] amvideocap0(low) : 0x1d200000 - 0x1da00000 ( 8 MiB)<4>[ 0.000000@0] get storage device: storage 4<4>[ 0.000000@0] value=4<4>[ 0.000000@0] get_storage_device : get storage device: storage 4<4>[ 0.000000@0] get_storage_device : value=4<4>[ 0.000000@0] [get_storage_device] storage_flag=4<4>[ 0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=4<6>[ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000<6>[ 0.000000@0] cma: Found region@0, memory base 0, size 18 MiB<6>[ 0.000000@0] cma: CMA: reserved 20 MiB at 2dc00000<4>[ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc<7>[ 0.000000@0] On node 0 totalpages: 406784<7>[ 0.000000@0] free_area_init_node: node 0, pgdat c0c961c0, node_mem_map c0f7a000<7>[ 0.000000@0] Normal zone: 1520 pages used for memmap<7>[ 0.000000@0] Normal zone: 0 pages reserved<7>[ 0.000000@0] Normal zone: 94208 pages, LIFO batch:31<7>[ 0.000000@0] HighMem zone: 2442 pages used for memmap<7>[ 0.000000@0] HighMem zone: 312576 pages, LIFO batch:31<6>[ 0.000000@0] Meson chip version = RevB (19:B - 0:27ED)<6>[ 0.000000@0] PERCPU: Embedded 9 pages/cpu @c1f09000 s13120 r8192 d15552 u36864<7>[ 0.000000@0] pcpu-alloc: s13120 r8192 d15552 u36864 alloc=9*4096<7>[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 <4>[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 405264<5>[ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200n8 no_console_suspend earlyprintk ramoops.mem_address=0x04e00000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive storage=4 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x07900000,1080p,full hdmimode=1080p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx= mac=00:11:6d:09:09:67<4>[ 0.000000@0] cvbs performance line = 0<4>[ 0.000000@0] cvbs trimming line = 0xa000<4>[ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0<4>[ 0.000000@0] osd1:1<4>[ 0.000000@0] loaded:268435459<4>[ 0.000000@0] logo has been loaded<4>[ 0.000000@0] 1080p:15<4>[ 0.000000@0] full:2<4>[ 0.000000@0] kernel get hdmimode form uboot is 1080p<4>[ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs<4>[ 0.000000@0] ******** uboot setup mac-addr: 0:11:6d:9:9:67<6>[ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)<6>[ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<6>[ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<6>[ 0.000000@0] Memory: 64MB 16MB 1509MB = 1589MB total<5>[ 0.000000@0] Memory: 1564920k/1564920k available, 62216k reserved, 1250304K highmem<5>[ 0.000000@0] Virtual kernel memory layout:<5>[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)<5>[ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)<5>[ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)<5>[ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)<5>[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)<5>[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)<5>[ 0.000000@0] .text : 0xc0008000 - 0xc0b83bc0 (11759 kB)<5>[ 0.000000@0] .init : 0xc0b84000 - 0xc0be3340 ( 381 kB)<5>[ 0.000000@0] .data : 0xc0be4000 - 0xc0c9d0e8 ( 741 kB)<5>[ 0.000000@0] .bss : 0xc0c9d0e8 - 0xc0f75f94 (2916 kB)<6>[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1<6>[ 0.000000@0] Preemptible hierarchical RCU implementation.<6>[ 0.000000@0] NR_IRQS:256<6>[ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms<7>[ 0.000000@0] Global timer: MESON TIMER-F (c0c03ac0) initialized<6>[ 0.000000@0] Switching to timer-based delay loop<7>[ 0.000000@0] meson_serial_console_setup<6>[ 0.000000@0] console [ttyS0] enabled<6>[ 0.403539@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)<6>[ 0.413825@0] pid_max: default: 32768 minimum: 301<6>[ 0.418706@0] Security Framework initialized<6>[ 0.422867@0] SELinux: Disabled at boot.<6>[ 0.426892@0] Mount-cache hash table entries: 512<6>[ 0.434784@0] Initializing cgroup subsys debug<6>[ 0.435933@0] Initializing cgroup subsys freezer<6>[ 0.440598@0] CPU: Testing write buffer coherency: ok<6>[ 0.445843@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200<6>[ 0.451423@0] Setting up static identity map for 0xc07f1970 - 0xc07f19c8<6>[ 0.458125@0] L310 cache controller enabled<6>[ 0.462229@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B<6>[ 0.469733@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000<6>[ 0.477886@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222<4>[ 0.560145@0] write pen_release: 1<4>[ 0.560321@1] CPU1: Booted secondary processor<6>[ 0.560334@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201<4>[ 0.580148@0] write pen_release: 2<4>[ 0.588288@2] CPU2: Booted secondary processor<6>[ 0.588300@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202<4>[ 0.600136@0] write pen_release: 3<4>[ 0.608278@3] CPU3: Booted secondary processor<6>[ 0.608289@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203<6>[ 0.608357@0] Brought up 4 CPUs<6>[ 0.621488@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).<6>[ 0.627717@0] CPU: All CPU(s) started in SVC mode.<6>[ 0.632975@0] devtmpfs: initialized<4>[ 0.640545@0] clkrate [ xtal ] : 24000000<4>[ 0.640574@0] clkrate [ pll_sys ] : 1200000000<4>[ 0.644535@0] clkrate [ pll_fixed ] : 2550000000<4>[ 0.649215@0] clkrate [ pll_vid ] : 366000000<4>[ 0.653643@0] TODO: clk_get_rate_hpll() is not implement in M8 now<4>[ 0.659790@0] clkrate [ pll_hpll ] : 0<4>[ 0.663609@0] clkrate [ pll_ddr ] : 0<4>[ 0.667332@0] clkrate [ a9_clk ] : 1200000000<4>[ 0.671759@0] clkrate [ clk81 ] : 141666666<6>[ 0.676722@0] pinctrl core: initialized pinctrl subsystem<6>[ 0.681547@0] regulator-dummy: no parameters<6>[ 0.686468@0] NET: Registered protocol family 16<6>[ 0.696134@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations<6>[ 0.697721@0] ramoops: using module parameters<4>[ 0.702218@0] pstore przs=0xf0010000<4>[ 0.705606@0] pstore cprz=0xf0008000<6>[ 0.709519@0] console [pstore-1] enabled<3>[ 0.713067@0] ram_console: failed to create proc entry<4>[ 0.719059@0] VPU driver version: v03<4>[ 0.721824@0] vpu driver detect cpu type: m8<4>[ 0.726062@0] load vpu_clk in dts: 364300000Hz(7)<4>[ 0.730759@0] vpu_probe OK<6>[ 0.733665@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device<6>[ 0.742448@0] amlogic_gpio gpio: Probed amlogic GPIO driver<4>[ 0.746225@0] register lm device lm-root<4>[ 0.750034@0] register lm device lm1<4>[ 0.753567@0] register lm device lm0<4>[ 0.757213@0] Init pinux probe!<6>[ 0.760604@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver<4>[ 0.765951@0] tv_init_module<4>[ 0.768801@0] major number 254 for disp<4>[ 0.772618@0] vout_register_server<4>[ 0.775990@0] register tv module server ok<4>[ 0.780089@0] major number 0 for disp<4>[ 0.783705@0] register tv module server ok<4>[ 0.787790@0] video2_early_init enter<4>[ 0.791426@0] video2_early_init exit<6>[ 0.794996@0] aml_i2c version: 20140813<7>[ 0.798831@0] plat->state_name:default<7>[ 0.798842@0] master_no = 0, master_regs=fe600500<6>[ 0.798912@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ed73d0a8)<6>[ 0.804867@0] aml-i2c i2c-AO: aml i2c bus driver.<7>[ 0.809563@0] plat->state_name:default<7>[ 0.809573@0] master_no = 1, master_regs=fe108500<6>[ 0.809630@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ed73d4a8)<6>[ 0.815527@0] aml-i2c i2c-A: aml i2c bus driver.<7>[ 0.820152@0] plat->state_name:default<7>[ 0.820162@0] master_no = 2, master_regs=fe1087c0<6>[ 0.820226@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ed73d8a8)<6>[ 0.826094@0] aml-i2c i2c-B: aml i2c bus driver.<7>[ 0.830721@0] plat->state_name:default<7>[ 0.830731@0] master_no = 3, master_regs=fe1087e0<6>[ 0.830782@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ed73dca8)<6>[ 0.836669@0] aml-i2c i2c-C: aml i2c bus driver.<4>[ 0.841324@0] aml_pmu_init, 458<4>[ 0.844398@0] call aml_dvfs_init in<7>[ 0.847888@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs<7>[ 0.847895@0] [DVFS]dvfs table of vcck_dvfs is:<7>[ 0.847900@0] [DVFS] freq, min_uV, max_uV<7>[ 0.847905@0] [DVFS] 96000, 825000, 825000<7>[ 0.847909@0] [DVFS] 192000, 825000, 825000<7>[ 0.847914@0] [DVFS] 312000, 825000, 825000<7>[ 0.847918@0] [DVFS] 408000, 825000, 825000<7>[ 0.847922@0] [DVFS] 504000, 825000, 825000<7>[ 0.847926@0] [DVFS] 600000, 850000, 850000<7>[ 0.847930@0] [DVFS] 720000, 850000, 850000<7>[ 0.847934@0] [DVFS] 816000, 875000, 875000<7>[ 0.847939@0] [DVFS] 1008000, 925000, 925000<7>[ 0.847943@0] [DVFS] 1200000, 975000, 975000<7>[ 0.847947@0] [DVFS] 1416000, 1025000, 1025000<7>[ 0.847951@0] [DVFS] 1608000, 1100000, 1100000<7>[ 0.847956@0] [DVFS] 1800000, 1125000, 1125000<7>[ 0.847960@0] [DVFS] 1992000, 1150000, 1150000<4>[ 0.848008@0] hdmitx: system: amhdmitx_init<4>[ 0.852018@0] hdmitx: system: Ver: 2014May6<4>[ 0.856225@0] hdmitx: system: amhdmitx_probe<4>[ 0.860561@0] hdmitx: system: not find cec config<4>[ 0.865099@0] hdmitx: system: not find vend_init_data<4>[ 0.870225@0] hdmitx: system: gate/pwr cmd: 7<4>[ 0.874462@0] hdmitx: system: ALREADY init VIC = 16<4>[ 0.879315@0] hdmitx: system: gate/pwr cmd: 0<4>[ 0.884046@1] hdmitx: system: reset intr mask<4>[ 0.900359@0] hdmitx: system: irq 1<6>[ 0.913850@0] bio: create slab <bio-0> at 0<5>[ 0.914255@0] SCSI subsystem initialized<6>[ 0.916406@0] usbcore: registered new interface driver usbfs<6>[ 0.921969@0] usbcore: registered new interface driver hub<6>[ 0.927442@0] usbcore: registered new device driver usb<6>[ 0.932672@0] Linux video capture interface: v2.00<6>[ 0.937383@0] pps_core: LinuxPPS API ver. 1 registered<6>[ 0.942480@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]><6>[ 0.951762@0] PTP clock support registered<4>[ 0.956059@0] mode is 15,sync_duration_den=1,sync_duration_num=60<4>[ 0.961907@0] TV mode 1080p selected.<4>[ 0.965530@0] already display in uboot<4>[ 0.969257@0] vinfo mode is: 1080p<4>[ 0.974626@0] call aml_pmu_probe_init in<4>[ 0.976586@0] aml_pmus_probe, child name:rn5t618<4>[ 0.981150@0] aml_pmus_probe, i2c_bus:i2c_bus_ao<4>[ 0.985999@0] board_has_battery:false<7>[ 0.989370@0] [DVFS]aml_dvfs_register_driver, driver rn5t618-dvfs regist success, mask:7, source id:1<7>[ 0.989376@0] [RN5T618]ricoh_pmu_probe, 287<7>[ 0.990170@0] [RN5T618]coulomb_flag:0x00<7>[ 0.990175@0] [RN5T618]no saved coulomb counter<7>[ 0.990220@0] ricoh_pmu_probe, 302<4>[ 0.990228@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t618, type:ricoh_pmu<6>[ 0.998152@0] Advanced Linux Sound Architecture Driver Initialized.<6>[ 1.004482@0] Bluetooth: Core ver 2.16<6>[ 1.007938@0] NET: Registered protocol family 31<6>[ 1.012528@0] Bluetooth: HCI device and connection manager initialized<6>[ 1.019018@0] Bluetooth: HCI socket layer initialized<4>[ 1.020725@1] hdmitx: system: gate/pwr cmd: 4<6>[ 1.028387@0] Bluetooth: L2CAP socket layer initialized<6>[ 1.033592@0] Bluetooth: SCO socket layer initialized<6>[ 1.038746@0] cfg80211: Calling CRDA to update world regulatory domain<6>[ 1.046225@0] Switching to clocksource Timer-E<6>[ 1.061253@0] NET: Registered protocol family 2<6>[ 1.061641@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes)<6>[ 1.067385@0] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)<6>[ 1.073993@0] TCP: Hash tables configured (established 4096 bind 4096)<6>[ 1.080478@0] TCP: reno registered<6>[ 1.083816@0] UDP hash table entries: 256 (order: 1, 8192 bytes)<6>[ 1.089814@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)<6>[ 1.096359@0] NET: Registered protocol family 1<4>[ 1.100810@0] wifi_dev_probe<4>[ 1.103578@0] wifi_dt : interrupt_pin=GPIOX_21<4>[ 1.107999@0] wifi_dt : irq_num=null<4>[ 1.111566@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH<4>[ 1.116665@0] wifi_dt : power_on_pin=GPIOAO_6<4>[ 1.121013@0] wifi_dt : power_on_pin2=GPIOX_11<4>[ 1.125423@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=122<6>[ 1.134368@0] Unpacking initramfs...<6>[ 1.183685@0] Freeing initrd memory: 1100K (c4e09000 - c4f1c000)<6>[ 1.185202@0] audit: initializing netlink socket (disabled)<5>[ 1.189647@0] type=2000 audit(1.070:1): initialized<7>[ 1.194832@1] balance_pgdat end zone=0, pgdat_is_balanced=0<4>[ 1.194921@0] bounce pool size: 64 pages<5>[ 1.201286@0] VFS: Disk quotas dquot_6.5.2<4>[ 1.202579@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<6>[ 1.210295@0] exFAT: Core Version 1.2.4<6>[ 1.212926@0] exFAT: FS Version 1.2.4<6>[ 1.217255@0] NTFS driver 2.1.30 [Flags: R/O].<6>[ 1.221179@0] fuse init (API version 7.22)<6>[ 1.225391@0] msgmni has been set to 672<6>[ 1.229707@0] NET: Registered protocol family 38<4>[ 1.229854@1] hdmitx: system: gate/pwr cmd: 5<4>[ 1.229855@1] hdmitx: edid: edid ready<4>[ 1.229857@1] hdmitx: system: gate/pwr cmd: 4<6>[ 1.246071@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)<6>[ 1.253502@0] io scheduler noop registered<6>[ 1.257561@0] io scheduler deadline registered<6>[ 1.262077@0] io scheduler cfq registered (default)<6>[ 1.269271@0] loop: module loaded<6>[ 1.270545@0] tun: Universal TUN/TAP device driver, 1.6<6>[ 1.275331@0] tun: (C) 1999-2004 Max Krasnyansky <[email protected]><6>[ 1.281774@0] PPP generic driver version 2.4.2<6>[ 1.286164@0] PPP BSD Compression module registered<6>[ 1.290945@0] PPP Deflate Compression module registered<6>[ 1.296143@0] PPP MPPE Compression module registered<6>[ 1.301085@0] NET: Registered protocol family 24<6>[ 1.305722@0] usbcore: registered new interface driver asix<6>[ 1.311290@0] usbcore: registered new interface driver ax88179_178a<6>[ 1.317492@0] usbcore: registered new interface driver cdc_ether<6>[ 1.323477@0] usbcore: registered new interface driver dm9601<6>[ 1.329187@0] usbcore: registered new interface driver net1080<6>[ 1.335000@0] usbcore: registered new interface driver cdc_subset<6>[ 1.341066@0] usbcore: registered new interface driver zaurus<6>[ 1.346802@0] usbcore: registered new interface driver cdc_ncm<6>[ 1.352597@0] usbcore: registered new interface driver qf9700<6>[ 1.358312@0] usbcore: registered new interface driver sr9600<6>[ 1.364162@0] usbcore: registered new interface driver cdc_acm<6>[ 1.369827@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters<6>[ 1.378000@0] usbcore: registered new interface driver usb-storage<6>[ 1.384196@0] usbcore: registered new interface driver usbserial<6>[ 1.390132@0] usbcore: registered new interface driver option<6>[ 1.395840@0] usbserial: USB Serial support registered for GSM modem (1-port)<6>[ 1.403120@0] mousedev: PS/2 mouse device common for all mice<6>[ 1.408837@0] usbcore: registered new interface driver xpad<6>[ 1.414241@0] usbcore: registered new interface driver usb_acecad<6>[ 1.420299@0] usbcore: registered new interface driver aiptek<6>[ 1.426007@0] usbcore: registered new interface driver gtco<6>[ 1.431574@0] usbcore: registered new interface driver hanwang<6>[ 1.437370@0] usbcore: registered new interface driver kbtab<4>[ 1.439870@1] hdmitx: system: gate/pwr cmd: 5<4>[ 1.439872@1] hdmitx: edid: edid ready<4>[ 1.439876@1] hdmitx: edid: check sum valid<4>[ 1.439877@1] hdmitx: edid: check sum valid<4>[ 1.439880@1] hdmitx: edid: blk0 raw data<4>[ 1.439903@1] 00ffffffffffff0009d1c2762e1d000018100103a02b1b78bacfb5a355499925<4>[ 1.439924@1] 105054a56f80454f614f81408180818f714fb300010121399030621a274068b0<4>[ 1.439945@1] 3600b10f1100001cd50980a0205e631010605208782d1100001a000000fd0038<4>[ 1.439967@1] 4c1e5411000a202020202020000000fc0042656e51204650323032570a200152<4>[ 1.439968@1] <4>[ 1.439969@1] hdmitx: edid: blk1 raw data<4>[ 1.439990@1] 02031b71230907078301000067030c001000802143011084e2000f011d007251<4>[ 1.440011@1] d01e206e28550081490000001e00000010000000000000000000000000000000<4>[ 1.440032@1] 0000100000000000000000000000000000000000100000000000000000000000<4>[ 1.440053@1] 00000000000010000000000000000000000000000000000000000000000000bf<4>[ 1.440053@1] <4>[ 1.440081@1] hdmitx: edid: find IEEEOUT<4>[ 1.440104@1] hdmitx: video: get current mode: 1080p<4>[ 1.440112@1] is_similar_hdmi_vic[326] vic_old=16,mode_new=15<4>[ 1.440114@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16<4>[ 1.440117@1] hdmitx: audio: audio channel num is 0<4>[ 1.440122@1] hdmitx: audio: SPDIF<4>[ 1.440133@1] hdmitx: audio: current VIC: 16<4>[ 1.440134@1] hdmitx: audio: audio sample rate: 0<4>[ 1.440136@1] hdmitx: audio: set audio N para<4>[ 1.440143@1] hdmitx: audio: PCM out to HDMI<4>[ 1.460690@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL<4>[ 1.460692@1] hdmitx: audio: i2s_to_spdif_flag:1 <4>[ 1.460693@1] hdmitx: audio: Enable audio spdif to HDMI<4>[ 1.460747@1] hdmitx: cec: CEC not ready<4>[ 1.460750@1] hdmi detect: plug.<6>[ 1.597923@0] usbcore: registered new interface driver wacom<6>[ 1.603594@0] i2c /dev entries driver<6>[ 1.607478@0] usbcore: registered new interface driver uvcvideo<6>[ 1.613061@0] USB Video Class driver (1.1.1)<6>[ 1.617462@0] device-mapper: uevent: version 1.0.3<6>[ 1.622239@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]<6>[ 1.630795@0] Bluetooth: HCI UART driver ver 2.2<6>[ 1.635236@0] Bluetooth: HCI H4 protocol initialized<6>[ 1.640379@0] hidraw: raw HID events driver (C) Jiri Kosina<6>[ 1.647094@0] usbcore: registered new interface driver usbhid<6>[ 1.651458@0] usbhid: USB HID core driver<6>[ 1.655741@0] zram: Created 1 device(s) ...<6>[ 1.659876@0] ashmem: initialized<6>[ 1.662996@0] logger: created 256K log 'log_main'<6>[ 1.667668@0] logger: created 256K log 'log_events'<6>[ 1.672537@0] logger: created 256K log 'log_radio'<6>[ 1.677285@0] logger: created 256K log 'log_system'<4>[ 1.682204@0] vout_init_module<4>[ 1.685122@0] start init vout module<4>[ 1.688652@0] create vout attribute ok<4>[ 1.692782@0] ge2d_init<4>[ 1.694882@0] ge2d_dev major:243<4>[ 1.698186@0] ge2d start monitor<4>[ 1.701346@0] osd_init<4>[ 1.701353@1] ge2d workqueue monitor start<4>[ 1.707729@0] osd_probe, vinfo:c084ccc0<4>[ 1.711705@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K<4>[ 1.719675@0] osd_probe, mydef_var:c0c36bf0, vinfo:c084ccc0<4>[ 1.725213@0] init fbdev bpp is :32<4>[ 1.728682@0] ---------------clear framebuffer0 memory<4>[ 1.744736@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0400000, size=1024K<4>[ 1.747182@0] osd_probe, mydef_var:c0c36bf0, vinfo:c084ccc0<4>[ 1.752740@0] don't find to display_size_default from mesonfb-dts<4>[ 1.758795@0] init fbdev bpp is :16<4>[ 1.777991@0] osd probe ok<4>[ 1.778088@0] osd_ext_init<4>[ 1.778306@0] vout2_init_module enter<4>[ 1.781429@0] start init vout2 module<4>[ 1.785051@0] create vout2 attribute ok<6>[ 1.788978@0] enter aml_sysled_init<6>[ 1.792776@0] amlvideo-000: V4L2 device registered as video10<6>[ 1.798259@0] amlvideo2: V4L2 device registered as video11<6>[ 1.803751@0] ionvideo-000: V4L2 device registered as video13<6>[ 1.809301@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.<7>[ 1.817724@0] DI: di_init<7>[ 1.817749@0] DI: di_probe<4>[ 1.817990@0] aml_wdt_driver_init,301<6>[ 1.821386@0] ** disable watchdog<6>[ 1.824773@0] keys===========================================<4>[ 1.830395@0] keys_devno=f000000<6>[ 1.833652@0] securitykey: device aml_keys created<4>[ 1.838344@0] amlkeys=0<6>[ 1.840816@0] platform_driver_register--aml_keys_driver--------------------<4>[ 1.847898@0] set uart_ao pinmux use pinctrl subsystem<4>[ 1.852848@0] P_AO_RTI_PIN_MUX_REG:5860<5>[ 1.856639@0] start uart_ao_ttyS0:(irq = 122)<5>[ 1.860986@0] register uart_ao ok<4>[ 1.864404@0] set uart_a pinmux use pinctrl subsystem<4>[ 1.869284@0] P_AO_RTI_PIN_MUX_REG:5860<5>[ 1.873137@0] start uart_a_ttyS1:(irq = 58)<5>[ 1.877259@0] register uart_a ok<5>[ 1.880623@0] start uart_d_ttyS4:(irq = 126)<5>[ 1.884714@0] register uart_d ok<6>[ 1.887998@0] dwc_otg: version 3.10a 12-MAY-2014<7>[ 1.892561@0] dwc_otg lm-root: dwc_otg_driver_probe(ed773400)<4>[ 1.892569@0] dwc_otg_driver_probe NOT match<7>[ 1.896781@0] dwc_otg lm1: dwc_otg_driver_probe(ed773600)<6>[ 1.896795@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000<5>[ 1.905376@0] USB (1) use clock source: XTAL input<7>[ 1.911135@0] dwc_otg lm1: base=0xfe080000<7>[ 1.911142@0] dwc_otg lm1: dwc_otg_device=0xed973e40<4>[ 1.931192@0] Core Release: 3.10a<4>[ 1.931223@0] Setting default values for core params<4>[ 1.933816@0] curmode: 1, host_only: 1<7>[ 1.937546@0] dwc_otg lm1: DMA config: BURST_DEFAULT<4>[ 1.957647@0] Using Buffer DMA mode<4>[ 1.957674@0] OTG VER PARAM: 1, OTG VER FLAG: 1<4>[ 1.960025@0] Working on port type = HOST<6>[ 1.964725@0] dwc_otg lm1: DWC OTG Controller<6>[ 1.968342@0] dwc_otg lm1: new USB bus registered, assigned bus number 1<6>[ 1.975049@0] dwc_otg lm1: irq 63, io mem 0x00000000<4>[ 1.979970@0] -------hcd->flags.d32 = 0<4>[ 1.983773@0] Init: Port Power? op_state=1<4>[ 1.987829@0] Init1: Power Port (0)<6>[ 1.991411@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002<6>[ 1.998239@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1<6>[ 2.005628@0] usb usb1: Product: DWC OTG Controller<6>[ 2.010477@0] usb usb1: Manufacturer: Linux 3.10.33 dwc_otg_hcd<6>[ 2.016353@0] usb usb1: SerialNumber: lm1<6>[ 2.020650@0] hub 1-0:1.0: USB hub found<6>[ 2.024245@0] hub 1-0:1.0: 1 port detected<7>[ 2.028459@0] dwc_otg lm0: dwc_otg_driver_probe(ed773800)<6>[ 2.028485@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000<5>[ 2.036930@0] USB (0) use clock source: XTAL input<7>[ 2.042684@0] dwc_otg lm0: base=0xfe040000<7>[ 2.042691@0] dwc_otg lm0: dwc_otg_device=0xed978740<4>[ 2.062734@0] Core Release: 3.10a<4>[ 2.062760@0] Setting default values for core params<4>[ 2.065355@0] curmode: 1, host_only: 0<7>[ 2.109053@0] dwc_otg lm0: DMA config: BURST_DEFAULT<4>[ 2.129162@0] Using Buffer DMA mode<4>[ 2.129189@0] OTG VER PARAM: 1, OTG VER FLAG: 1<4>[ 2.131541@0] Working on port type = OTG<4>[ 2.135421@0] Current port type: SLAVE<6>[ 2.139273@0] dwc_otg lm0: DWC OTG Controller<6>[ 2.143520@0] dwc_otg lm0: new USB bus registered, assigned bus number 2<6>[ 2.150199@0] dwc_otg lm0: irq 62, io mem 0x00000000<6>[ 2.155128@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002<6>[ 2.162068@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1<6>[ 2.169402@0] usb usb2: Product: DWC OTG Controller<6>[ 2.174278@0] usb usb2: Manufacturer: Linux 3.10.33 dwc_otg_hcd<6>[ 2.180175@0] usb usb2: SerialNumber: lm0<6>[ 2.184387@0] hub 2-0:1.0: USB hub found<6>[ 2.188051@0] hub 2-0:1.0: 1 port detected<4>[ 2.192255@0] Dedicated Tx FIFOs mode<4>[ 2.195981@0] using timer detect id change, ed96d800<4>[ 2.200818@0] boot_device_flag : 0<4>[ 2.204074@0] ===========================================amlnf_init:643,nand device tree ok,dev-name:nand<4>[ 2.213644@0] Nand PHY driver Version: 2.01.001.0006 (c) 2013 Amlogic Inc.<4>[ 2.220487@0] amlnf_phy_init : amlnf init flag 0<4>[ 2.220506@1] Indeed it is in host mode hprt0 = 00021501<4>[ 2.230429@0] HOST mode<4>[ 2.232838@0] ######STS IRQ mode for nand driver<4>[ 2.237412@0] NAND device id: 2c 64 44 4b a9 0 0 0<4>[ 2.242158@0] detect NAND device: B revision NAND 8GiB MT29F64G08CBABA<4>[ 2.259561@0] -------hcd->flags.d32 = 0<4>[ 2.259609@0] Init: Port Power? op_state=1<4>[ 2.261834@0] Init1: Power Port (0)<4>[ 2.265300@0] [RN5T618]rn5t618_otg_change, driver is not ready, do it later<4>[ 2.272257@0] set usb port power on (board gpio 15)!<4>[ 2.275895@2] status:0<4>[ 2.275902@2] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gfa4a182-dirty #1<4>[ 2.275926@2] [<c00148e8>] (unwind_backtrace+0x0/0xf4) from [<c0011984>] (show_stack+0x10/0x14)<4>[ 2.275936@2] [<c0011984>] (show_stack+0x10/0x14) from [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0)<4>[ 2.275944@2] [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0) from [<c04bd4f8>] (nand_reset+0xd0/0x1c4)<4>[ 2.275950@2] [<c04bd4f8>] (nand_reset+0xd0/0x1c4) from [<c04bd860>] (read_id+0x68/0x144)<4>[ 2.275957@2] [<c04bd860>] (read_id+0x68/0x144) from [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c)<4>[ 2.275963@2] [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c) from [<c04c5a0c>] (amlnf_phy_init+0x180/0x204)<4>[ 2.275972@2] [<c04c5a0c>] (amlnf_phy_init+0x180/0x204) from [<c04b729c>] (amlnf_init+0xd4/0x12c)<4>[ 2.275985@2] [<c04b729c>] (amlnf_init+0xd4/0x12c) from [<c02f6cf4>] (driver_probe_device+0xd0/0x214)<4>[ 2.275994@2] [<c02f6cf4>] (driver_probe_device+0xd0/0x214) from [<c02f6ee4>] (__driver_attach+0x68/0x8c)<4>[ 2.276001@2] [<c02f6ee4>] (__driver_attach+0x68/0x8c) from [<c02f5298>] (bus_for_each_dev+0x4c/0x98)<4>[ 2.276009@2] [<c02f5298>] (bus_for_each_dev+0x4c/0x98) from [<c02f640c>] (bus_add_driver+0xd0/0x258)<4>[ 2.276016@2] [<c02f640c>] (bus_add_driver+0xd0/0x258) from [<c02f74f4>] (driver_register+0xa8/0x13c)<4>[ 2.276023@2] [<c02f74f4>] (driver_register+0xa8/0x13c) from [<c0008564>] (do_one_initcall+0xa8/0x150)<4>[ 2.276034@2] [<c0008564>] (do_one_initcall+0xa8/0x150) from [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0)<4>[ 2.276044@2] [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0) from [<c07dee30>] (kernel_init+0x8/0x158)<4>[ 2.276054@2] [<c07dee30>] (kernel_init+0x8/0x158) from [<c000dcd8>] (ret_from_fork+0x14/0x3c)<4>[ 2.291932@2] status:0<4>[ 2.291936@2] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gfa4a182-dirty #1<4>[ 2.291944@2] [<c00148e8>] (unwind_backtrace+0x0/0xf4) from [<c0011984>] (show_stack+0x10/0x14)<4>[ 2.291951@2] [<c0011984>] (show_stack+0x10/0x14) from [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0)<4>[ 2.291957@2] [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0) from [<c04bd4f8>] (nand_reset+0xd0/0x1c4)<4>[ 2.291963@2] [<c04bd4f8>] (nand_reset+0xd0/0x1c4) from [<c04bd860>] (read_id+0x68/0x144)<4>[ 2.291968@2] [<c04bd860>] (read_id+0x68/0x144) from [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c)<4>[ 2.291974@2] [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c) from [<c04c5a0c>] (amlnf_phy_init+0x180/0x204)<4>[ 2.291981@2] [<c04c5a0c>] (amlnf_phy_init+0x180/0x204) from [<c04b729c>] (amlnf_init+0xd4/0x12c)<4>[ 2.291989@2] [<c04b729c>] (amlnf_init+0xd4/0x12c) from [<c02f6cf4>] (driver_probe_device+0xd0/0x214)<4>[ 2.291996@2] [<c02f6cf4>] (driver_probe_device+0xd0/0x214) from [<c02f6ee4>] (__driver_attach+0x68/0x8c)<4>[ 2.292003@2] [<c02f6ee4>] (__driver_attach+0x68/0x8c) from [<c02f5298>] (bus_for_each_dev+0x4c/0x98)<4>[ 2.292009@2] [<c02f5298>] (bus_for_each_dev+0x4c/0x98) from [<c02f640c>] (bus_add_driver+0xd0/0x258)<4>[ 2.292016@2] [<c02f640c>] (bus_add_driver+0xd0/0x258) from [<c02f74f4>] (driver_register+0xa8/0x13c)<4>[ 2.292022@2] [<c02f74f4>] (driver_register+0xa8/0x13c) from [<c0008564>] (do_one_initcall+0xa8/0x150)<4>[ 2.292030@2] [<c0008564>] (do_one_initcall+0xa8/0x150) from [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0)<4>[ 2.292037@2] [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0) from [<c07dee30>] (kernel_init+0x8/0x158)<4>[ 2.292044@2] [<c07dee30>] (kernel_init+0x8/0x158) from [<c000dcd8>] (ret_from_fork+0x14/0x3c)<4>[ 2.306951@2] status:0<4>[ 2.306955@2] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gfa4a182-dirty #1<4>[ 2.306962@2] [<c00148e8>] (unwind_backtrace+0x0/0xf4) from [<c0011984>] (show_stack+0x10/0x14)<4>[ 2.306969@2] [<c0011984>] (show_stack+0x10/0x14) from [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0)<4>[ 2.306975@2] [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0) from [<c04bd4f8>] (nand_reset+0xd0/0x1c4)<4>[ 2.306980@2] [<c04bd4f8>] (nand_reset+0xd0/0x1c4) from [<c04bd860>] (read_id+0x68/0x144)<4>[ 2.306986@2] [<c04bd860>] (read_id+0x68/0x144) from [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c)<4>[ 2.306992@2] [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c) from [<c04c5a0c>] (amlnf_phy_init+0x180/0x204)<4>[ 2.306998@2] [<c04c5a0c>] (amlnf_phy_init+0x180/0x204) from [<c04b729c>] (amlnf_init+0xd4/0x12c)<4>[ 2.307006@2] [<c04b729c>] (amlnf_init+0xd4/0x12c) from [<c02f6cf4>] (driver_probe_device+0xd0/0x214)<4>[ 2.307014@2] [<c02f6cf4>] (driver_probe_device+0xd0/0x214) from [<c02f6ee4>] (__driver_attach+0x68/0x8c)<4>[ 2.307020@2] [<c02f6ee4>] (__driver_attach+0x68/0x8c) from [<c02f5298>] (bus_for_each_dev+0x4c/0x98)<4>[ 2.307027@2] [<c02f5298>] (bus_for_each_dev+0x4c/0x98) from [<c02f640c>] (bus_add_driver+0xd0/0x258)<4>[ 2.307034@2] [<c02f640c>] (bus_add_driver+0xd0/0x258) from [<c02f74f4>] (driver_register+0xa8/0x13c)<4>[ 2.307040@2] [<c02f74f4>] (driver_register+0xa8/0x13c) from [<c0008564>] (do_one_initcall+0xa8/0x150)<4>[ 2.307048@2] [<c0008564>] (do_one_initcall+0xa8/0x150) from [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0)<4>[ 2.307055@2] [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0) from [<c07dee30>] (kernel_init+0x8/0x158)<4>[ 2.307062@2] [<c07dee30>] (kernel_init+0x8/0x158) from [<c000dcd8>] (ret_from_fork+0x14/0x3c)<6>[ 2.399574@1] usb 1-1: new high-speed USB device number 2 using dwc_otg<4>[ 2.750754@1] Indeed it is in host mode hprt0 = 00001101<4>[ 2.755896@2] AML_NAND_NEW_OOB : new oob<4>[ 2.759747@2] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15<4>[ 2.767625@2] boot_device_flag = 0<4>[ 2.772005@2] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 0<4>[ 2.783639@2] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0<4>[ 2.787978@2] nand shipped bbt at block 0<4>[ 2.808351@2] NAND CKECK : arg phyp: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 1<4>[ 2.832757@2] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 15<4>[ 2.835890@2] i=0,register --- nand_key<4>[ 2.839393@2] amlnand_phydev_init,1177,phydev->offset=6000000,phydev->size=24800000<4>[ 2.847000@2] amlnand_phydev_init,1177,phydev->offset=2a800000,phydev->size=50800000<4>[ 2.854712@2] amlnand_phydev_init,1177,phydev->offset=7b000000,phydev->size=185000000<4>[ 2.862515@2] nfcache : offset: 0x000006000000 -0x000024800000 : partitons 1 : single_chip multi_plane<4>[ 2.872049@2] nfcode : offset: 0x00002a800000 -0x000050800000 : partitons 5 : single_chip multi_plane<4>[ 2.881583@2] nfdata : offset: 0x00007b000000 -0x000185000000 : partitons 1 : single_chip multi_plane<4>[ 2.891117@2] amlnand_add_nftl:<5>[ 2.894232@2] Creating 1 ntd partitions<4>[ 2.898051@2] block_num 146 <4>[ 2.903537@2] ------init_ntd<5>[ 2.903969@2] ntd: Giving out device 0 to nfcache<5>[ 2.908448@2] Creating 5 ntd partitions<4>[ 2.912272@2] block_num 322 <5>[ 2.921049@2] ntd: Giving out device 1 to nfcode<5>[ 2.921080@2] Creating 1 ntd partitions<4>[ 2.923841@2] block_num 1556 <6>[ 2.950751@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608<6>[ 2.951986@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0<5>[ 2.954953@2] ntd: Giving out device 2 to nfdata<4>[ 2.955227@2] ethernet_driver probe!<4>[ 2.955231@2] Please config phy interface.<4>[ 2.955233@2] Please config savepowermode.<4>[ 2.955235@2] Please config reset_pin_enable.<4>[ 2.955236@2] Please config reset_delay.<4>[ 2.955237@2] Please config reset_pin.<4>[ 2.955240@2] ethernetinit(dbg[c0c3d7e4]=1)<4>[ 2.955261@2] ethernet base addr is fe0c0000<4>[ 2.955271@2] write mac add to:ed985848: 00 11 6d 09 09 67 |.m..g|<6>[ 3.002303@0] usb 1-1: Product: USB2.0 Hub<6>[ 3.004306@2] libphy: AMLMAC MII Bus: probed<6>[ 3.004311@2] eth0: PHY ID 02430c54 at 0 IRQ -1 (0:00) active<4>[ 3.004748@2] Amlogic A/V streaming port init<4>[ 3.005493@2] buffersize=262144,0,start=0<4>[ 3.005501@2] Subtitle stbuf alloced at 0xece40000, size = 262144<4>[ 3.005503@2] changed the (2) buffer size from 0 to 262144<4>[ 3.005630@2] init vdec memsource 9a00000->199fffff<4>[ 3.005707@2] [tsync_pcr_init]init success. <4>[ 3.005709@2] amvideocap_init_module<4>[ 3.005737@2] amvideocap_probe,amvideocap<4>[ 3.005741@2] amvideocap_dev_register buf:1d200000,size:800000.<4>[ 3.005920@2] regist mpeg12 codec profile<4>[ 3.005955@2] regist mpeg4 codec profile<4>[ 3.005956@2] amvdec_vc1 module init<4>[ 3.005990@2] regist vc1 codec profile<4>[ 3.005991@2] amvdec_h264 module init<4>[ 3.006048@2] regist h264 codec profile<4>[ 3.006049@2] amvdec_h264mvc module init<4>[ 3.006083@2] regist hmvc codec profile<4>[ 3.006084@2] amvdec_h264_4k2k module init<4>[ 3.006122@2] regist h264_4k2k codec profile<4>[ 3.006123@2] amvdec_h265 module init<4>[ 3.006161@2] regist hevc_unsupport codec profile<4>[ 3.006196@2] regist mjpeg codec profile<4>[ 3.006197@2] amvdec_real module init<4>[ 3.006231@2] amvdec_avs module init<4>[ 3.006317@2] amvenc_avc memory resource undefined.<4>[ 3.006318@2] encode_wq_init.<4>[ 3.006321@2] encode start monitor.<4>[ 3.128147@2] encode workqueue monitor start.<6>[ 3.128524@0] hub 1-1:1.0: USB hub found<6>[ 3.128794@0] hub 1-1:1.0: 4 ports detected<4>[ 3.140554@1] jpegenc module init<4>[ 3.143917@1] picdec buffer size is 4000000<4>[ 3.147993@1] alloc_keep_buffer keep_y_addr eca00000<4>[ 3.152875@1] alloc_keep_buffer keep_u_addr ecf00000<4>[ 3.157772@1] alloc_keep_buffer keep_v_addr ed000000<4>[ 3.162736@1] yaddr=eca00000,u_addr=ecf00000,v_addr=ed000000<4>[ 3.168530@1] create_ge2d_work_queue video task ok <4>[ 3.173217@1] video2_init enter<4>[ 3.176584@1] video2_drv_probe exit<4>[ 3.180071@1] <4>[ 3.180071@1] <4>[ 3.180071@1] VECM init <4>[ 3.180071@1] <6>[ 3.187472@1] efuse===========================================<6>[ 3.193237@1] efuse: device efuse created<6>[ 3.197160@1] efuse--------------------------------------------<6>[ 3.203025@1] SARADC Driver init.<4>[ 3.206389@1] __saradc_probe__<4>[ 3.289587@3] Indeed it is in host mode hprt0 = 00021501<4>[ 3.349676@1] saradc calibration: ref_val = 504<4>[ 3.349706@1] saradc calibration: ref_nominal = 512<4>[ 3.353420@1] saradc calibration: coef = 4088<4>[ 3.357935@1] irblaster probe<6>[ 3.360826@1] Remote Driver<4>[ 3.363541@1] Remote platform_data g_remote_base=fe600580<4>[ 3.368870@1] set drvdata completed
<4>[ 3.372419@1] device_create_file completed
<6>[ 3.376956@1] input: aml_keypad as /devices/platform/meson-remote/input/input0<4>[ 3.384008@1] input_register_device completed
<4>[ 3.388391@1] [0xffffff00] = 0x1dd0190<4>[ 3.392093@1] [0xffffff04] = 0xf800ca<4>[ 3.395721@1] [0xffffff08] = 0x82006e<4>[ 3.399361@1] [0xffffff0c] = 0x3c0030<4>[ 3.403009@1] [0xffffff10] = 0x30fa0013<4>[ 3.406816@1] [0xffffff18] = 0x6f19000<4>[ 3.410550@1] [0xffffff1c] = 0xbe40<4>[ 3.414011@1] [0x0] = 0xfa00a0<4>[ 3.417044@1] [0x4] = 0xfa00a0<4>[ 3.420084@1] [0x8] = 0xfa00a0<4>[ 3.423112@1] [0xc] = 0x640030<4>[ 3.426146@1] [0x10] = 0x30fa0013<4>[ 3.429440@1] [0x18] = 0x961b800<4>[ 3.432653@1] [0x1c] = 0x9740<4>[ 3.435595@1] [0x20] = 0x104<4>[ 3.438455@1] [0x24] = 0x0<4>[ 3.441148@1] [0x28] = 0x0<4>[ 3.443830@1] set_remote_mode[69]<4>[ 3.447135@1] remote config major:232
<4>[ 3.450939@1] physical address:0x2d0ba000<6>[ 3.454867@1] ADC Keypad Driver init.<4>[ 3.458559@1] ==touch_ts_init==<4>[ 3.461682@1] ==ft5x0x_ts_init==<4>[ 3.464829@1] ==goodix_ts_init==<4>[ 3.468046@1] i2c-core: driver [gslx680_compatible] using legacy suspend method<6>[ 3.469570@3] usb 2-1: new high-speed USB device number 2 using dwc_otg<4>[ 3.469859@0] Indeed it is in host mode hprt0 = 00001101<4>[ 3.487180@1] i2c-core: driver [gslx680_compatible] using legacy resume method<6>[ 3.494412@1] !!!ntp_ts: ret = 0. <4>[ 3.497747@1] VTL ct36x TouchScreen driver, <[email protected]>.<4>[ 3.504186@1] i2c-core: driver [ct36x] using legacy suspend method<4>[ 3.510322@1] i2c-core: driver [ct36x] using legacy resume method<4>[ 3.516384@1] VTL ct36x TouchScreen driver End.<4>[ 3.520897@1] ==gsl_ts_init==<4>[ 3.523855@1] ret=0<4>[ 3.525975@1] ####################come here #####################<6>[ 3.547419@1] up vfd key(103) registed.<6>[ 3.547445@1] down vfd key(108) registed.<6>[ 3.549609@1] right vfd key(106) registed.<6>[ 3.553676@1] back vfd key(158) registed.<6>[ 3.557663@1] left vfd key(105) registed.<6>[ 3.561657@1] ok vfd key(232) registed.<6>[ 3.565572@1] input: vfd_keypad as /devices/platform/m1-vfd.0/input/input1<4>[ 3.572399@1] vfd config major:231
<4>[ 3.576035@1] i2c-core: driver [mir3da] using legacy suspend method<4>[ 3.582031@1] i2c-core: driver [mir3da] using legacy resume method<4>[ 3.588195@1] i2c-core: driver [lis3dh_acc] using legacy suspend method<4>[ 3.594772@1] i2c-core: driver [lis3dh_acc] using legacy resume method<4>[ 3.601317@1] i2c-core: driver [bma222] using legacy suspend method<4>[ 3.607506@1] i2c-core: driver [bma222] using legacy resume method<4>[ 3.613706@1] i2c-core: driver [dmard06] using legacy suspend method<4>[ 3.619996@1] i2c-core: driver [dmard06] using legacy resume method<6>[ 3.626247@1] lsm303d driver: init<4>[ 3.629655@1] i2c-core: driver [dmard10] using legacy suspend method<4>[ 3.635937@1] i2c-core: driver [dmard10] using legacy resume method<4>[ 3.642207@1] stk8313_init<4>[ 3.644882@1] ======stk831x init ok======<4>[ 3.648853@1] stk831x_init<6>[ 3.651566@1] mxc622x accelerometer driver: init<4>[ 3.656150@1] i2c-core: driver [mxc622x] using legacy suspend method<4>[ 3.662469@1] i2c-core: driver [mxc622x] using legacy resume method<6>[ 3.668705@1] mxc6255xc accelerometer driver: init<6>[ 3.671252@0] usb 2-1: New USB device found, idVendor=05e3, idProduct=0718<6>[ 3.671262@0] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2<6>[ 3.671265@0] usb 2-1: Product: USB Storage<6>[ 3.671269@0] usb 2-1: SerialNumber: 000000000033<4>[ 3.696497@1] i2c-core: driver [mxc6255xc] using legacy suspend method<6>[ 3.696912@0] usb-storage 2-1:1.0: USB Mass Storage device detected<4>[ 3.709229@1] i2c-core: driver [mxc6255xc] using legacy resume method<4>[ 3.715716@1] cm3217 v.1.0.0.1<6>[ 3.718673@0] scsi0 : usb-storage 2-1:1.0<4>[ 3.718680@1] i2c-core: driver [elan_epl6814] using legacy suspend method<4>[ 3.718682@1] i2c-core: driver [elan_epl6814] using legacy resume method<4>[ 3.718702@1] i2c-core: driver [LTR501] using legacy suspend method<4>[ 3.718704@1] i2c-core: driver [LTR501] using legacy resume method<6>[ 3.718772@1] GPIO Keypad Driver init.<4>[ 3.718846@1] ==gpio_key_probe==<4>[ 3.718867@1] reg:2620,clearmask=400040,setmask=1<4>[ 3.718870@1] reg:2622,clearmask=ff0000,set pin=3<4>[ 3.718872@1] reg:2623,clearmask=7000000,setmask=7<4>[ 3.718875@1] reg:2620,clearmask=800080,setmask=10001<4>[ 3.718878@1] reg:2622,clearmask=ff000000,set pin=3<4>[ 3.718880@1] reg:2623,clearmask=70000000,setmask=7<6>[ 3.718900@1] power key(116) registed.<6>[ 3.719010@1] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input2<4>[ 3.719093@1] gpio keypad register input device completed.<4>[ 3.719097@1] gpio keypad major:230<4>[ 3.719207@1] spi_nor_init<4>[ 3.719276@1] amlogic_spi_nor_probe:<4>[ 3.719282@1] amlogic_spi->state_name:default<6>[ 3.719349@1] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated<4>[ 3.719394@1] check_storage_device : spi boot_device_flag : 0<4>[ 3.719395@1] spi_nor_probe<6>[ 3.719423@1] spi_nor apollospi:32766: mx25l160 (2048 Kbytes)<5>[ 3.719596@1] Creating 2 MTD partitions on "apollospi:32766":<5>[ 3.719602@1] 0x000000000000-0x000000100000 : "bootloader"<5>[ 3.720101@1] 0x000000100000-0x000000110000 : "ubootenv"<4>[ 3.720518@1] amlogic_spi_nor_probe over<4>[ 3.720620@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error<4>[ 3.866665@0] key 116 up<4>[ 3.869424@1] host->base fe108c20<4>[ 3.872449@1] pdata->caps 7<4>[ 3.875182@1] pdata->caps2 0<4>[ 3.878043@1] get property: port, value:0x00000001<4>[ 3.884553@1] get property: ocr_avail, value:0x00200000<4>[ 3.891053@1] get property: f_min, value:0x000493e0<4>[ 3.897545@1] get property: f_max, value:0x02faf080<4>[ 3.904055@1] get property: max_req_size, value:0x00020000<4>[ 3.910555@1] get property: irq_in, value:0x00000003<4>[ 3.917049@1] get property: irq_out, value:0x00000005<4>[ 3.923560@1] get property: gpio_cd, str:CARD_6<4>[ 3.929532@1] get property: pinname, str:sd<4>[ 3.935190@1] get property: jtag_pin, str:CARD_0<4>[ 3.941155@1] get property: card_type, value:0x00000005<4>[ 3.947649@1] get property: gpio_dat3, str:CARD_4<6>[ 3.949798@0] usb 1-1.1: new high-speed USB device number 3 using dwc_otg<4>[ 4.000594@1] reg:2620,clearmask=80008,setmask=10001<4>[ 4.000629@1] reg:2621,clearmask=ff000000,set pin=64<4>[ 4.004946@1] reg:2623,clearmask=7000,setmask=7<4>[ 4.009454@1] reg:2620,clearmask=200020,setmask=1<4>[ 4.014221@1] reg:2622,clearmask=ff00,set pin=64<4>[ 4.018815@1] reg:2623,clearmask=700000,setmask=7<4>[ 4.023642@1] pdata->caps 107<4>[ 4.026443@1] pdata->caps2 0<4>[ 4.029305@1] get property: port, value:0x00000000<4>[ 4.035824@1] get property: ocr_avail, value:0x00200000<4>[ 4.042327@1] get property: f_min, value:0x000493e0<4>[ 4.048808@1] get property: f_max, value:0x02faf080<4>[ 4.055319@1] get property: max_req_size, value:0x00020000<6>[ 4.055327@0] usb 1-1.1: New USB device found, idVendor=13fe, idProduct=3600<6>[ 4.055332@0] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3<6>[ 4.055336@0] usb 1-1.1: Product: silicon-power<6>[ 4.055339@0] usb 1-1.1: Manufacturer: <6>[ 4.055343@0] usb 1-1.1: SerialNumber: 11030106E6B31000106200C1<4>[ 4.091217@1] get property: pinname, str:sdio<6>[ 4.091623@0] usb-storage 1-1.1:1.0: USB Mass Storage device detected<4>[ 4.103462@1] get property: card_type, value:0x00000003<6>[ 4.110057@0] usb-storage 1-1.1:1.0: Quirks match for vid 13fe pid 3600: 4000<6>[ 4.117101@0] scsi1 : usb-storage 1-1.1:1.0<6>[ 4.199866@0] usb 1-1.3: new low-speed USB device number 4 using dwc_otg<4>[ 4.239571@0] [aml_sdio_probe] aml_sdio_probe() success!<4>[ 4.240701@0] host->base fe108e00<4>[ 4.242587@0] pdata->caps 80000547<4>[ 4.245946@0] pdata->caps2 0<4>[ 4.248785@0] get property: port, value:0x00000005<4>[ 4.255313@0] get property: ocr_avail, value:0x00200000<4>[ 4.261819@0] get property: f_min, value:0x000493e0<4>[ 4.268285@0] get property: f_max, value:0x05f5e100<4>[ 4.274812@0] get property: max_req_size, value:0x00020000<4>[ 4.281324@0] get property: pinname, str:emmc<4>[ 4.287110@0] get property: card_type, value:0x00000001<4>[ 4.293627@0] get property: gpio_dat3, str:BOOT_3<4>[ 4.299778@0] [is_emmc_exist] host->storage_flag=4, POR_BOOT_VALUE=5<4>[ 4.305919@0] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config!<6>[ 4.326370@0] usb 1-1.3: New USB device found, idVendor=1997, idProduct=1221<6>[ 4.327782@0] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0<6>[ 4.335279@1] usb 1-1.3: Product: Wireless Air mouse Keyboard<6>[ 4.340964@1] usb 1-1.3: Manufacturer: <6>[ 4.349099@0] input: Wireless Air mouse Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.0/input/input3<6>[ 4.354539@0] hid-generic 0003:1997:1221.0001: input,hidraw0: USB HID v1.00 Keyboard [ Wireless Air mouse Keyboard] on usb-lm1-1.3/input0<4>[ 4.369561@3] [aml_sdhc_probe] aml_sdhc_probe() success!<6>[ 4.371775@0] input: Wireless Air mouse Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.1/input/input4<6>[ 4.372026@0] hid-generic 0003:1997:1221.0002: input,hidraw1: USB HID v1.00 Mouse [ Wireless Air mouse Keyboard] on usb-lm1-1.3/input1<6>[ 4.393652@3] [dsp]DSP start addr 0xc5e00000<6>[ 4.397832@3] [dsp]register dsp to char divece(257)<6>[ 4.402904@3] amlogic audio spdif interface device init!<4>[ 4.408021@3] name=nand_key nand_key<4>[ 4.411893@3] register_aes_algorithm:488,new way<4>[ 4.416570@3] key name:keyexample, key data:1234567890<6>[ 4.421833@3] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0<7>[ 4.429728@3] [AML1216]call aml1216_battery_init, ret = 0<7>[ 4.429770@3] [AML1218]call aml1218_battery_init, ret = 0<7>[ 4.429806@3] [RN5T618]call rn5t618_battery_probe in<7>[ 4.429813@3] [RN5T618]no special flag, clear RTC mem, force using ocv<6>[ 4.430558@3] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input/input5<7>[ 4.435085@3] [RN5T618]use BSP configed battery parameters<3>[ 4.435090@3] [RN5T618] NO BATTERY_PARAMETERS FOUND<4>[ 4.439865@3] [RN5T618]no battery, exit<7>[ 4.449617@2] [RN5T618]call rn5t618_battery_probe exit, ret:0<7>[ 4.449639@2] [RN5T618]call rn5t618_battery_init, ret = 0<6>[ 4.449660@2] vdin_drv_init: major 228<6>[ 4.449817@2] vdin0 mem_start = 0x19a00000, mem_size = 0x1000000<6>[ 4.453760@2] vdin_drv_probe: driver initialized ok<6>[ 4.458695@2] vdin1 mem_start = 0x1aa00000, mem_size = 0x1000000<6>[ 4.464618@2] vdin_drv_probe: driver initialized ok<4>[ 4.469513@2] amvdec_656in module: init.<4>[ 4.473354@2] amvdec_656in_init_module:major 227<4>[ 4.478144@2] amvdec_656in probe ok.<4>[ 4.481692@2] amvdec_csi probe ok.<4>[ 4.484883@2] [viuin..]viuin_init_module viuin module init<4>[ 4.490446@2] [viuin..]viuin_probe probe ok.<6>[ 4.494744@2] [isp..]isp_probe isp probe ok.<4>[ 4.498838@2] [sii9233a_drv_init] Ver: 2013Nov12<6>[ 4.504025@2] amaudio2: device amaudio2 created<4>[ 4.508054@2] Error: Didn't get power valid value --- wifi_power_probe 376<4>[ 4.514793@2] Error: Didn't get suspend_power_off value --- wifi_power_probe 393<4>[ 4.522154@2] wifi_power power_gpio is 6<4>[ 4.526045@2] wifi_power power_gpio2 is 123<4>[ 4.530340@2] amlogic rfkill init<7>[ 4.533536@2] enter bt_probe of_node<4>[ 4.533543@2] not get gpio_en<4>[ 4.536446@2] not get gpio_wake<4>[ 4.569629@2] wifi_request_32k_clk : OFF-->ON for bt_rfkill<4>[ 4.569665@2] clock_32k_pin(122) : (null)<4>[ 4.573553@2] clock_32k_pin(122) : sdio_wifi<6>[ 4.680586@2] aml_aes aml_aes: Aml AES<6>[ 4.680922@2] aml_tdes aml_tdes: Aml TDES<6>[ 4.682968@2] usbcore: registered new interface driver snd-usb-audio<4>[ 4.689239@2] enter rt5616_modinit<4>[ 4.692512@2] dummy_codec_platform_probe<4>[ 4.696408@2] == ES8323 == es8323_modinit() <7>[ 4.700885@2] enter aml_i2s_dai_probe<6>[ 4.700892@2] i2s get no clk src setting in dts, use the default mpll 0<6>[ 4.707135@2] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000<7>[ 4.715132@2] enter aml_pcm_dai_probe<6>[ 4.715169@2] [aml-spdif-dai]enter aml_dai_spdif_init<6>[ 4.720055@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4<4>[ 4.727152@2] audio_set_958_clk, freq=4,<4>[ 4.731081@2] IEC958 16bit<4>[ 4.733742@2] hdmitx: audio: aout notify rate 48000<4>[ 4.738595@2] hdmitx: audio: aout notify size 16<4>[ 4.743199@2] hdmitx: audio: aout notify format CT_PCM<4>[ 4.748305@2] hdmitx: audio: audio channel num is 1<4>[ 4.753171@2] hdmitx: audio: SPDIF<4>[ 4.756546@2] hdmitx: audio: current VIC: 16<4>[ 4.760794@2] hdmitx: audio: audio sample rate: 3<4>[ 4.765466@2] hdmitx: audio: set audio N para<4>[ 4.769812@2] hdmitx: audio: PCM out to HDMI<4>[ 4.774048@2] hdmitx: audio: i2s_to_spdif_flag:1 <4>[ 4.778727@2] hdmitx: audio: Enable audio spdif to HDMI<4>[ 4.783942@2] hdmitx: audio: Audio Type: PCM<4>[ 4.788217@2] hdmitx: audio: set audio param<6>[ 4.792492@2] [aml-spdif-dai]aml_spdif_probe<4>[ 4.796772@2] test codec dummy_codec<4>[ 4.800236@2] using external codec, index = 1<4>[ 4.804559@2] using external dummy codec<4>[ 4.808548@2] enter spdif_dit_probe <6>[ 4.812023@2] aml_spdif_unmute <4>[ 4.815268@2] codec_name = dummy_codec.0<7>[ 4.819212@3] enter aml_set_bias_level level: 1<7>[ 4.819222@3] enter aml_set_bias_level level: 1<7>[ 4.819229@3] enter aml_set_bias_level level: 1<7>[ 4.819233@3] enter aml_set_bias_level level: 2<7>[ 4.819281@2] enter aml_asoc_init <6>[ 4.819302@2] p_aml_audio->hp_disable=1<4>[ 4.822862@2] falied to get spk event delay time paraments from dts file<6>[ 4.829524@2] spk_event delay_time = 0<4>[ 4.834373@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288<4>[ 4.842531@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536<6>[ 4.850961@2] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok<7>[ 4.858959@2] enter aml_set_bias_level level: 1<7>[ 4.858965@2] enter aml_set_bias_level level: 2<4>[ 4.860290@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288<4>[ 4.868162@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2f460000, size=65536<6>[ 4.876619@2] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok<7>[ 4.884546@2] enter aml_set_bias_level level: 1<7>[ 4.884552@2] enter aml_set_bias_level level: 2<7>[ 4.884638@2] enter aml_set_bias_level level: 1<7>[ 4.884643@2] enter aml_set_bias_level level: 2<7>[ 4.885160@2] enter aml_set_bias_level level: 1<7>[ 4.885166@2] enter aml_set_bias_level level: 2<4>[ 4.885261@2] -----ext_codec=1---<4>[ 4.887787@2] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0<6>[ 4.893885@2] GACT probability NOT on<6>[ 4.897402@2] Mirror/redirect action on<6>[ 4.901222@2] u32 classifier<6>[ 4.904070@2] Actions configured<6>[ 4.907627@2] Netfilter messages via NETLINK v0.30.<6>[ 4.912520@2] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)<6>[ 4.919096@2] ctnetlink v0.93: registering with nfnetlink.<6>[ 4.924244@2] NF_TPROXY: Transparent proxy support initialized, version 4.1.0<6>[ 4.931298@2] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.<6>[ 4.937544@2] xt_time: kernel timezone is -0000<6>[ 4.941869@2] ipip: IPv4 over IPv4 tunneling driver<6>[ 4.947028@2] ip_tables: (C) 2000-2006 Netfilter Core Team<6>[ 4.952217@2] arp_tables: (C) 2002 David S. Miller<6>[ 4.956890@2] TCP: cubic registered<6>[ 4.960338@2] Initializing XFRM netlink socket<6>[ 4.965053@2] NET: Registered protocol family 10<6>[ 4.969884@2] mip6: Mobile IPv6<6>[ 4.972480@2] ip6_tables: (C) 2000-2006 Netfilter Core Team<6>[ 4.978157@2] sit: IPv6 over IPv4 tunneling driver<6>[ 4.983383@2] NET: Registered protocol family 17<6>[ 4.987395@2] NET: Registered protocol family 15<5>[ 4.992031@2] Bridge firewalling registered<6>[ 4.996205@2] Bluetooth: RFCOMM TTY layer initialized<6>[ 5.001186@2] Bluetooth: RFCOMM socket layer initialized<6>[ 5.006444@2] Bluetooth: RFCOMM ver 1.11<6>[ 5.010356@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3<6>[ 5.015805@2] Bluetooth: BNEP filters: protocol multicast<6>[ 5.021193@2] Bluetooth: BNEP socket layer initialized<6>[ 5.026293@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2<6>[ 5.032375@2] Bluetooth: HIDP socket layer initialized<6>[ 5.037499@2] l2tp_core: L2TP core driver, V2.0<6>[ 5.042000@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0<6>[ 5.046923@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)<6>[ 5.052668@2] l2tp_netlink: L2TP netlink interface<6>[ 5.057432@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)<6>[ 5.063512@2] l2tp_debugfs: L2TP debugfs support<6>[ 5.068074@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)<6>[ 5.074702@2] NET: Registered protocol family 35<6>[ 5.079922@2] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4<5>[ 5.087070@2] Registering SWP/SWPB emulation handler<4>[ 5.092010@2] enter meson_pm_init<6>[ 5.095418@2] enter meson_pm_probe!<6>[ 5.098763@2] meson_pm_probe done !<6>[ 5.102742@2] file system registered<6>[ 5.106415@2] android_usb gadget: Mass Storage Function, version: 2009/09/11<6>[ 5.112818@2] android_usb gadget: Number of LUNs=2<6>[ 5.117572@2] lun0: LUN: removable file: (no medium)<6>[ 5.122631@2] lun1: LUN: removable file: (no medium)<6>[ 5.127783@2] android_usb gadget: android_usb ready<6>[ 5.132907@2] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)<6>[ 5.139879@2] ### dt-test ### No testcase data in device tree; not running tests<4>[ 5.147312@2] meson_cpufreq: no voltage_control prop<4>[ 5.152165@2] voltage_control = 0<4>[ 5.156617@2] <<-GTP-INFO->> GTP driver installing...<4>[ 5.160559@2] hdmitx: cec: CEC init<5>[ 5.160849@0] scsi 1:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS<6>[ 5.172738@2] input: cec_input as /devices/virtual/input/input6<4>[ 5.183901@2] hdmitx: cec: CEC task process<4>[ 5.178483@2] hdmitx: cec: hdmitx_device->cec_init_ready:0x1<6>[ 5.188067@2] ALSA device list:<6>[ 5.191346@2] #0: AML-M8AUDIO<7>[ 5.194526@2] config uart_ao_ttyS0:: Character length 8bits/char<6>[ 5.209556@2] Changing uart_ao_ttyS0: baud from 0 to 115200<5>[ 5.652572@0] sd 1:0:0:0: [sda] 3919872 512-byte logical blocks: (2.00 GB/1.86 GiB)<5>[ 5.655693@0] sd 1:0:0:0: [sda] Write Protect is off<7>[ 5.659530@0] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00<3>[ 5.660693@0] sd 1:0:0:0: [sda] No Caching mode page found<3>[ 5.665005@0] sd 1:0:0:0: [sda] Assuming drive cache: write through<3>[ 5.675697@0] sd 1:0:0:0: [sda] No Caching mode page found<3>[ 5.676690@0] sd 1:0:0:0: [sda] Assuming drive cache: write through<6>[ 5.709301@0] sda: sda1<3>[ 5.712957@0] sd 1:0:0:0: [sda] No Caching mode page found<3>[ 5.712988@0] sd 1:0:0:0: [sda] Assuming drive cache: write through<5>[ 5.719056@0] sd 1:0:0:0: [sda] Attached SCSI removable disk<6>[ 5.724843@2] Freeing unused kernel memory: 380K (c0b84000 - c0be3000)<11>[ 5.752201@3] init: aml-firstboot-init insert aml-firstboot-init<14>[ 5.753064@3] init: command 'loglevel 7' action=early-init status=0 (init.amlogic.board.rc:4)<4>[ 5.763763@3] aml_nftl_dev: module license 'Proprietary' taints kernel.<4>[ 5.767651@3] Disabling lock debugging due to kernel taint<4>[ 5.773864@3] boot_device_flag : 0<4>[ 5.776494@3] register_ntd_blktrans start<4>[ 5.780509@3] ntd device 250!<4>[ 5.783427@3] ntd->name: nfcache<4>[ 5.786636@3] adjust_block_num : 4,reserved_block_ratio 10<4>[ 5.792112@3] nftl version 150330d<4>[ 5.795475@3] nftl build Mar 30 2015_19:39:32<4>[ 5.799830@3] nftl part attr 0<4>[ 5.804983@3] nftl start:146,17, init flag 0<4>[ 5.807261@3] first<4>[ 5.858163@3] average_erase_count:0<4>[ 5.858187@3] second 10,129<4>[ 5.858786@3] part->max_discard_block = 4<4>[ 5.868359@3] current_block1:134<4>[ 5.884474@3] all discard block full!!<4>[ 5.884506@3] free block cnt = 138<4>[ 5.885965@3] new current block is 136<4>[ 6.040035@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!<5>[ 6.109387@0] scsi 0:0:0:0: Direct-Access USB TO I DE/SATA Device 0016 PQ: 0 ANSI: 4<4>[ 6.113790@0] sd 0:0:0:0: [sdb] Test WP failed, assume Write Enabled<3>[ 6.118849@0] sd 0:0:0:0: [sdb] Asking for cache data failed<3>[ 6.124012@0] sd 0:0:0:0: [sdb] Assuming drive cache: write through<4>[ 6.132600@0] sd 0:0:0:0: [sdb] Test WP failed, assume Write Enabled<3>[ 6.137054@0] sd 0:0:0:0: [sdb] Asking for cache data failed<3>[ 6.142205@0] sd 0:0:0:0: [sdb] Assuming drive cache: write through<5>[ 6.148438@0] sd 0:0:0:0: [sdb] Attached SCSI disk<4>[ 6.452610@2] [RN5T618]battery vol change: 0->0 <4>[ 6.482177@0] recover_current_block_mapping : fill the current block, from page 255<4>[ 6.484194@0] total discard page count is 0<4>[ 6.488354@0] create_part_list:1238,current_used_discard_block=135,current_discard_block_used_count=19<4>[ 6.498089@0] unmappig_pages=31982,discarded_pages=0,mapping_pages=1042<4>[ 6.504246@0] nftl ok!<4>[ 6.506965@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 6.511725@0] aml_nftl_add_ntd ok<4>[ 6.514444@0] ntd device 250!<4>[ 6.517393@0] ntd->name: nfcode<4>[ 6.520548@0] adjust_block_num : 4,reserved_block_ratio 10<4>[ 6.525975@0] nftl version 150330d<4>[ 6.529363@0] nftl build Mar 30 2015_19:39:32<4>[ 6.533732@0] nftl part attr 0<4>[ 6.541525@0] nftl start:322,33, init flag 0<4>[ 6.541844@0] first<4>[ 6.643993@0] average_erase_count:0<4>[ 6.644016@0] second 262,289<4>[ 6.644711@0] part->max_discard_block = 4<4>[ 6.797637@0] current_block1:58<4>[ 6.806383@0] all discard block full!!<4>[ 6.806459@0] free block cnt = 64<4>[ 6.807789@0] new current block is 60<4>[ 6.959044@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!<4>[ 7.373299@0] recover_current_block_mapping : fill the current block, from page 255<4>[ 7.375312@0] total discard page count is 0<4>[ 7.379489@0] create_part_list:1238,current_used_discard_block=59,current_discard_block_used_count=276<4>[ 7.389712@0] unmappig_pages=9933,discarded_pages=0,mapping_pages=64051<4>[ 7.395356@0] nftl ok!<4>[ 7.398331@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.402900@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.407352@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.412042@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.416528@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.421111@0] aml_nftl_add_ntd ok<4>[ 7.423942@0] ntd device 250!<4>[ 7.426892@0] ntd->name: nfdata<4>[ 7.430049@0] adjust_block_num : 4,reserved_block_ratio 10<4>[ 7.435473@0] nftl version 150330d<4>[ 7.438852@0] nftl build Mar 30 2015_19:39:32<4>[ 7.443318@0] nftl part attr 0<4>[ 7.469249@0] nftl start:1556,146, init flag 0<4>[ 7.470566@0] first<4>[ 7.972219@0] found discard block:1554<4>[ 7.972545@0] average_erase_count:0<4>[ 7.973814@0] second 803,1410<4>[ 7.976748@0] part->max_discard_block = 4<4>[ 8.438363@0] current_block1:752<4>[ 8.537740@0] currnet_discard_block1:1554<4>[ 8.543246@0] reach the last discard page:8<4>[ 8.544410@0] free block cnt = 835<4>[ 8.545181@0] new current block is 828<4>[ 8.832728@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!<4>[ 9.116116@0] recover_current_block_mapping : fill the current block, from page 255<4>[ 9.118130@0] total discard page count is 8<4>[ 9.122316@0] create_part_list:1238,current_used_discard_block=1554,current_discard_block_used_count=2<4>[ 9.136606@0] unmappig_pages=271934,discarded_pages=2912,mapping_pages=86114<4>[ 9.138590@0] nftl ok!<4>[ 9.141668@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 9.146075@0] aml_nftl_add_ntd ok<4>[ 9.148827@0] init_aml_nftl end<14>[ 9.152188@0] init: command 'insmod /boot/aml_nftl_dev.ko' action=early-init status=0 (init.amlogic.board.rc:9)<4>[ 9.167261@0] gpu cooling register okay with err=0<4>[ 9.167417@0] gpu core cooling register okay with err=0<4>[ 9.172176@0] Mali: Mali device driver loaded<14>[ 9.176500@0] init: command 'insmod /boot/mali.ko mali_debug_level=2 mali_shared_mem_size=0x40000000' action=early-init status=0 (init.amlogic.board.rc:10)<14>[ 9.190256@0] init: processing action 0xb646c970 (wait_for_coldboot_done)<14>[ 9.196937@0] init: wait for /dev/.coldboot_done<14>[ 9.201573@0] init: command 'wait_for_coldboot_done' action=wait_for_coldboot_done status=0 ((null):0)<14>[ 9.210831@0] init: processing action 0xb646c9a0 (mix_hwrng_into_linux_rng)<14>[ 9.217854@0] init: Mixed 512 bytes from /dev/hw_random into /dev/urandominit: command 'mix_hwrng_into_linux_rng' action=mix_hwrng_into_linux_rng status=0 ((null):0)<14>[ 9.232500@0] init: processing action 0xb646c9d0 (keychord_init)<14>[ 9.238460@0] init: command 'keychord_init' action=keychord_init status=0 ((null):0)<14>[ 9.246218@0] init: processing action 0xb646ca00 (console_init)<7>[ 9.252135@0] config uart_ao_ttyS0:: Character length 8bits/char<14>[ 9.252186@0] init: command 'console_init' action=console_init status=0 ((null):0)<14>[ 9.254134@0] init: processing action 0xb64460a0 (init)<14>[ 9.259323@0] init: command 'sysclktz 0' action=init status=0 (/init.rc:33)<11>[ 9.269413@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'<11>[ 9.274436@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'<11>[ 9.284324@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'<11>[ 9.292460@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'<11>[ 9.302341@0] init: enter do_confirm_formated /dev/block/data, /data<11>[ 9.308642@0] init: do_confirm_formated ext4 try mount<4>[ 9.313841@0] aml_nftl_open ok!<4>[ 9.317587@0] force enable DISCARD here for ext4 fs<7>[ 9.892817@0] EXT4-fs (data): ext4_orphan_cleanup: deleting unreferenced inode 265971<7>[ 9.893091@0] EXT4-fs (data): ext4_orphan_cleanup: deleting unreferenced inode 265124<7>[ 9.898857@0] EXT4-fs (data): ext4_orphan_cleanup: deleting unreferenced inode 97838<7>[ 9.898994@0] EXT4-fs (data): ext4_orphan_cleanup: deleting unreferenced inode 97840<7>[ 9.899038@0] EXT4-fs (data): ext4_orphan_cleanup: deleting unreferenced inode 40549<6>[ 9.899107@0] EXT4-fs (data): 5 orphan inodes deleted<6>[ 9.899137@0] EXT4-fs (data): recovery complete<4>[ 9.986722@0] checked enable EXT4 DISCARD here<6>[ 9.986754@0] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: noauto_da_alloc<11>[ 9.999415@0] init: enter do_confirm_formated /dev/block/cache, /cache<11>[ 10.000661@0] init: do_confirm_formated ext4 try mount<4>[ 10.005799@0] aml_nftl_open ok!<4>[ 10.009534@0] force enable DISCARD here for ext4 fs<6>[ 10.035264@0] EXT4-fs (cache): recovery complete<4>[ 10.038136@0] checked enable EXT4 DISCARD here<6>[ 10.038668@0] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: noauto_da_alloc<4>[ 10.051483@1] aml_nftl_open ok!<4>[ 10.052207@1] force enable DISCARD here for ext4 fs<4>[ 10.061637@1] checked enable EXT4 DISCARD here<6>[ 10.061667@1] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)<14>[ 10.068461@1] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0<4>[ 10.075993@1] blktrans_ioctl -cmd: 125d,801c0204,64<4>[ 10.080982@1] aml_nftl_open ok!<4>[ 10.084709@1] force enable DISCARD here for ext4 fs<4>[ 10.088881@1] EXT4-fs (data): Ignoring removed nomblk_io_submit option<4>[ 10.103993@1] checked enable EXT4 DISCARD here<6>[ 10.104024@1] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro<14>[ 10.113078@1] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0<14>[ 10.122865@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/data<4>[ 10.195546@3] aml_nftl_open ok!<4>[ 10.195627@3] aml_nftl_open ok!<14>[ 10.206875@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)<14>[ 10.206936@1] e2fsck: /dev/block/data: clean, 10769/361440 files, 339632/1443840 blocks<4>[ 10.214105@1] aml_nftl_open ok!<4>[ 10.217729@1] force enable DISCARD here for ext4 fs<4>[ 10.221925@1] EXT4-fs (data): Ignoring removed nomblk_io_submit option<4>[ 10.231817@1] checked enable EXT4 DISCARD here<6>[ 10.232816@1] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic<14>[ 10.242644@1] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0<4>[ 10.249895@1] aml_nftl_open ok!<4>[ 10.253613@1] force enable DISCARD here for ext4 fs<4>[ 10.257782@1] EXT4-fs (cache): Ignoring removed nomblk_io_submit option<4>[ 10.267465@1] checked enable EXT4 DISCARD here<6>[ 10.268788@1] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro<14>[ 10.279145@1] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0<14>[ 10.287788@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache<4>[ 10.296526@3] aml_nftl_open ok!<4>[ 10.296602@3] aml_nftl_open ok!<14>[ 10.306182@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)<14>[ 10.306228@1] e2fsck: /dev/block/cache: clean, 16/32768 files, 4211/131072 blocks<4>[ 10.312877@1] aml_nftl_open ok!<4>[ 10.316507@1] force enable DISCARD here for ext4 fs<4>[ 10.320698@1] EXT4-fs (cache): Ignoring removed nomblk_io_submit option<4>[ 10.329806@1] checked enable EXT4 DISCARD here<6>[ 10.331689@1] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic<14>[ 10.341609@1] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0<7>[ 10.397688@1] config uart_ao_ttyS0:: Character length 8bits/char<6>[ 10.399863@3] binder: 142:142 transaction failed 29189, size 0-0<4>[ 10.445205@0] buf[0]=27,buf[1]=9b,err=4<4>[ 10.445238@0] M8:adc=434,TS_C=7,flag=1<4>[ 10.447144@0] efuse_flag=a<4>[ 10.450001@0] amlogic_thermal_probe, this chip is trimmed, use thermal<6>[ 10.456341@0] amlogic-thermal aml_thermal: amlogic thermal probe start<4>[ 10.462906@0] #thermal-cells=7<4>[ 10.465869@0] keep_mode is disabled<4>[ 10.469338@0] pdata->temp_trip_count=4<4>[ 10.473124@0] temperature=70 on trip point=0<4>[ 10.477311@0] fixing high_freq=1608001 to 1608000 at trip point 0,level=2<4>[ 10.484081@0] fixing low_freq=1608001 to 1608000 at trip point 0,level=2<4>[ 10.490782@0] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511<4>[ 10.497193@0] cpu[0] core num==3<4>[ 10.500406@0] gpu[0] core num==5<4>[ 10.503572@0] temperature=80 on trip point=1<4>[ 10.507838@0] fixing high_freq=1200001 to 1200000 at trip point 1,level=6<4>[ 10.514587@0] fixing low_freq=1200001 to 1200000 at trip point 1,level=6<4>[ 10.521294@0] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435<4>[ 10.527681@0] cpu[1] core num==2<4>[ 10.530948@0] gpu[1] core num==4<4>[ 10.534097@0] temperature=90 on trip point=2<4>[ 10.538343@0] fixing high_freq=800001 to 696000 at trip point 2,level=11<4>[ 10.545047@0] fixing low_freq=800001 to 696000 at trip point 2,level=11<4>[ 10.551640@0] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328<4>[ 10.558017@0] cpu[2] core num==2<4>[ 10.561261@0] gpu[2] core num==3<4>[ 10.564447@0] temperature=260 on trip point=3<4>[ 10.568762@0] fixing high_freq=-1 to -22 at trip point 3,level=-1<4>[ 10.574835@0] fixing low_freq=-1 to -22 at trip point 3,level=-1<4>[ 10.580843@0] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1<4>[ 10.587046@0] cpu[3] core num==-1<4>[ 10.590390@0] gpu[3] core num==-1<4>[ 10.593635@0] idle interval=1000<4>[ 10.596874@0] pdata->name:aml_thermal, pdata:ec15d400<4>[ 10.601905@0] amlogic_thermal_init_from_dts, 998<4>[ 10.606470@0] amlogic_thermal_initialize, 1014, pdata:ec15d400<4>[ 10.613275@0] tmp_trip[0].cpu_core_upper=1<4>[ 10.616385@0] tmp_trip[1].cpu_core_upper=2<4>[ 10.620511@0] tmp_trip[2].cpu_core_upper=2<4>[ 10.624516@0] tmp_trip[3].cpu_core_upper=-1<6>[ 10.628719@0] aml_thermal bind thermal-cpucore-0 okay !<6>[ 10.634009@0] aml_thermal bind thermal-cpufreq-0 okay !<38>[ 10.638940@2] logd.auditd: start<4>[ 10.642678@0] tmp_trip[0].gpu_core_upper=1<4>[ 10.646480@0] tmp_trip[1].gpu_core_upper=2<4>[ 10.650513@0] tmp_trip[2].gpu_core_upper=3<4>[ 10.654504@0] tmp_trip[3].gpu_core_upper=-1<6>[ 10.658653@0] aml_thermal bind thermal-gpucore-0 okay !<4>[ 10.663957@0] pdata->tmp_trip[0].gpu_lower_level=1<4>[ 10.668626@0] pdata->tmp_trip[0].gpu_upper_level=1<4>[ 10.673453@0] pdata->tmp_trip[1].gpu_lower_level=2<4>[ 10.678188@0] pdata->tmp_trip[1].gpu_upper_level=2<4>[ 10.683011@0] pdata->tmp_trip[2].gpu_lower_level=3<4>[ 10.687700@0] pdata->tmp_trip[2].gpu_upper_level=3<4>[ 10.692525@0] pdata->tmp_trip[3].gpu_lower_level=-1<4>[ 10.697338@0] pdata->tmp_trip[3].gpu_upper_level=-1<6>[ 10.702217@0] aml_thermal bind thermal-gpufreq-0 okay !<6>[ 10.707534@0] amlogic: Kernel Thermal management registered<6>[ 10.712989@0] amlogic-thermal aml_thermal: amlogic thermal probe done<4>[ 10.721028@0] video first pts = 0<4>[ 10.723099@0] IEC958 16bit<4>[ 10.725315@0] hdmitx: audio: aout notify rate 48000<4>[ 10.730228@0] hdmitx: audio: aout notify size 16<4>[ 10.734770@0] hdmitx: audio: no update<4>[ 10.738488@0] aml_i2s_close device type 4 <7>[ 10.742668@0] enter aml_set_bias_level level: 1<7>[ 10.742673@0] enter aml_set_bias_level level: 2<4>[ 10.743029@0] IEC958 16bit<4>[ 10.745274@0] hdmitx: audio: aout notify rate 48000<4>[ 10.750170@0] hdmitx: audio: aout notify size 16<4>[ 10.754694@0] hdmitx: audio: no update<4>[ 10.758422@0] aml_i2s_close device type 8 <4>[ 10.763220@0] aml_i2s_close device type 1 <7>[ 10.766637@0] enter aml_set_bias_level level: 1<7>[ 10.766651@0] enter aml_set_bias_level level: 2<4>[ 10.766777@0] IEC958 16bit<4>[ 10.769269@0] hdmitx: audio: aout notify rate 48000<6>[ 10.770741@2] read descriptors<6>[ 10.770746@2] read strings<4>[ 10.779967@0] hdmitx: audio: aout notify size 16<4>[ 10.784449@0] hdmitx: audio: no update<4>[ 10.788168@0] aml_i2s_close device type 2 <4>[ 10.795150@0] vfm_map_store:rm default<4>[ 10.797128@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo<11>[ 10.804148@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'<11>[ 10.813654@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'<11>[ 10.826107@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'<11>[ 10.835956@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'<11>[ 10.850324@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'<11>[ 10.858321@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'<11>[ 10.870982@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'<11>[ 10.880698@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'<11>[ 10.894989@0] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'<11>[ 10.900928@0] init: cannot find '/system/bin/rild', disabling 'ril-daemon'<11>[ 10.909036@0] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'<3>[ 10.920270@0] android_usb: already disabled<6>[ 10.920500@0] mtp_bind_config<4>[ 10.923306@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode<4>[ 10.923306@0] <4>[ 10.934859@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode<4>[ 10.934859@0] <4>[ 10.945958@0] WARN::ep_dequeue:413: bogus device state<4>[ 10.945958@0] <6>[ 10.952873@0] mtp_bind_config<4>[ 10.955574@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode<4>[ 10.955574@0] <6>[ 10.974993@0] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS<4>[ 10.976709@1] cur_mode = 0<4>[ 10.976713@1] [0x0] = 0x1dd0190<4>[ 10.976714@1] [0x4] = 0xf800ca<4>[ 10.976716@1] [0x8] = 0x82006e<4>[ 10.976717@1] [0xc] = 0x3c0030<4>[ 10.976718@1] [0x10] = 0x30fa0013<4>[ 10.976719@1] [0x18] = 0x6f19000<4>[ 10.976721@1] [0x1c] = 0x9f40<4>[ 10.976722@1] [0x20] = 0x0<4>[ 10.976723@1] [0x24] = 0x0<4>[ 10.976724@1] [0x28] = 0x0<4>[ 10.976726@1] set_remote_mode[69]<4>[ 11.014321@3] tvmode set to 720p<4>[ 11.016982@3] set_vout_mode[256]fps_target_mode=11<4>[ 11.021781@3] mode is 11,sync_duration_den=1,sync_duration_num=60<4>[ 11.028038@3] TV mode 720p selected.<4>[ 11.031459@3] tvoutc_setmode[512]<4>[ 11.034657@3] tvoutc_setmode[523] mode is 11<4>[ 11.039263@3] vinfo mode is: 720p<4>[ 11.042319@3] new mode =720p set ok<11>[ 11.045468@0] dig: data_integrity_guard main!<4>[ 11.050194@3] hdmitx: video: get current mode: 720p<4>[ 11.055178@3] is_similar_hdmi_vic[326] vic_old=16,mode_new=11<4>[ 11.061970@3] hdmitx: video: get current mode: 720p<6>[ 11.067969@3] warning: `su' uses 32-bit capabilities (legacy support in use)<4>[ 11.072511@3] is_similar_hdmi_vic[326] vic_old=16,mode_new=11<4>[ 11.078174@3] hdmitx: system: gate/pwr cmd: 7<4>[ 11.083080@3] hdmitx: system: already init VIC = 0 Now VIC = 4<4>[ 11.088649@3] hdmitx: system: 4 (cd0,cs0,pm1,vd0,1) <4>[ 11.093464@3] hdmitx: system: gate/pwr cmd: 0<4>[ 11.097763@3] hdmitx: system: hw reset<4>[ 11.102625@3] hdmitx: audio: SPDIF<4>[ 11.104924@3] hdmitx: system: reconfig packet setting done<4>[ 11.107658@1] blktrans_ioctl -cmd: 125d,801c0204,64<4>[ 11.135290@3] hdmitx: system: set pll<4>[ 11.135323@3] hdmitx: system: param->VIC:4<4>[ 11.137392@3] mode is: 11<4>[ 11.140027@3] VPU_VIU_VENC_MUX_CTRL: 0x22a<4>[ 11.144067@3] viu chan = 1<4>[ 11.147885@3] VPU_VIU_VENC_MUX_CTRL: 0x22a<4>[ 11.152373@0] config HPLL<4>[ 11.153458@0] set_hpll_clk_out[81] clk = 2970<6>[ 11.157916@1] EXT4-fs (system): re-mounted. Opts: (null)<4>[ 11.169639@0] config HPLL done<4>[ 11.169682@0] enc_vpu_bridge_reset[292]<6>[ 11.255158@1] EXT4-fs (system): re-mounted. Opts: (null)<6>[ 11.278338@1] EXT4-fs (system): re-mounted. Opts: (null)<4>[ 11.309599@1] hdmitx: system: phy setting done<4>[ 11.309647@1] Sink is HDMI device<4>[ 11.311719@1] No sink attached<4>[ 11.314896@1] hdmitx: audio: audio channel num is 1<4>[ 11.319919@1] hdmitx: audio: SPDIF<11>[ 11.323083@1] init: untracked pid 256 exited with status 0<4>[ 11.328470@1] hdmitx: audio: current VIC: 4<4>[ 11.332760@1] hdmitx: audio: audio sample rate: 3<4>[ 11.337281@1] hdmitx: audio: set audio N para<4>[ 11.341672@1] hdmitx: audio: PCM out to HDMI<4>[ 11.345862@1] hdmitx: audio: i2s_to_spdif_flag:1 <4>[ 11.350585@1] hdmitx: audio: Enable audio spdif to HDMI<4>[ 11.355746@1] hdmitx: audio: Audio Type: PCM<4>[ 11.371948@1] set_vout_mode[264]<4>[ 11.438699@1] buf=0<4>[ 11.438728@1] IEC958_mode_raw=0<4>[ 11.438853@1] osd0=>x:0 ,y:0,w:1920,h:1080<4>[ 11.438853@1] osd1=> x:0,y:0,w:18,h:18<4>[ 11.455398@1] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 11.455767@1] osd[1].scaledata: 1920 1280 1080 720<4>[ 11.461907@1] osd[1].pandata: 0 0 0 0<4>[ 13.123091@1] force enable DISCARD here for ext4 fs<4>[ 13.123619@1] checked enable EXT4 DISCARD here<4>[ 13.126762@1] EXT4-fs (zram0): mounting with "discard" option, but the device does not support discard<6>[ 13.136090@1] EXT4-fs (zram0): mounted filesystem with ordered data mode. Opts: (null)<7>[ 14.359589@2] -----hotplug:2<4>[ 14.419899@3] IRQ95 no longer affine to CPU3<5>[ 14.420103@1] CPU3: shutdown<4>[ 14.565939@1] IRQ93 no longer affine to CPU1<5>[ 14.566170@0] CPU1: shutdown<7>[ 15.769698@0] enter aml_set_bias_level level: 1<7>[ 15.769707@0] enter aml_set_bias_level level: 2<7>[ 15.799658@0] enter aml_set_bias_level level: 1<7>[ 15.799667@0] enter aml_set_bias_level level: 2<4>[ 17.351070@0] vout [tv_set_vframe_rate_end_hint] return mode = 11, policy = 1!<4>[ 17.352664@0] vout [framerate_automation_set_mode] mode_target = 11<4>[ 17.360211@0] +++++++++++++++++framerate_automation_set_mode[1128]auto_mode=0++++++++++++++++<6>[ 17.674828@2] request_suspend_state: wakeup (3->0) at 17555275000 (1970-01-01 00:00:13.041928000 UTC)<4>[ 17.678406@2] request_suspend_state,169,old_sleep=0,new_state=0<4>[ 36.859716@0] write pen_release: 1<4>[ 36.859965@1] CPU1: Booted secondary processor<6>[ 38.270578@1] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:<6>[ 38.272258@1] lowmemorykiller: oom_adj 0 => oom_score_adj 0<6>[ 38.277805@1] lowmemorykiller: oom_adj 1 => oom_score_adj 58<6>[ 38.283459@1] lowmemorykiller: oom_adj 2 => oom_score_adj 117<6>[ 38.289168@1] lowmemorykiller: oom_adj 3 => oom_score_adj 176<6>[ 38.289171@1] lowmemorykiller: oom_adj 9 => oom_score_adj 529<6>[ 38.289173@1] lowmemorykiller: oom_adj 15 => oom_score_adj 1000<7>[ 38.559611@1] -----hotplug:2<4>[ 38.620806@1] IRQ93 no longer affine to CPU1<5>[ 38.621058@0] CPU1: shutdown<6>[ 39.398359@2] acc_open<6>[ 39.398369@2] acc_release<6>[ 39.661996@2] netdev_open<6>[ 39.661997@2] Ethernet reset<4>[ 39.662003@2] NET MDA descpter start addr=ebd61000<4>[ 39.662335@2] phy_interface = 1<4>[ 39.662338@2] aml_phy_init: trying to attach to 0:00<4>[ 39.662671@2] --1--write mac add to:ed985848: 00 11 6d 09 09 67 |.m..g|<4>[ 39.662678@2] unkown current key-name,key_read_show:1396<4>[ 39.662682@2] version NO error<4>[ 39.662683@2] ret = -22<4>[ 39.662683@2] print_buff=<4>[ 39.662689@2] --2--write mac add to:ed985848: 00 11 6d 09 09 67 |.m..g|<4>[ 39.662695@2] write mac add to:ed985848: 00 11 6d 09 09 67 |.m..g|<4>[ 39.662698@2] Current DMA mode=0, set mode=621c100<7>[ 39.662714@2] eth0: opened (irq 40).<4>[ 39.662717@2] ether leave promiscuous mode<4>[ 39.662718@2] ether leave all muticast mode<4>[ 39.662719@2] changed the Multicast,mcount=1<4>[ 39.662723@2] add mac address:33:33:00:00:00:01,bit=1<4>[ 39.662724@2] set hash low=2,high=0<4>[ 39.662726@2] changed the filter setting to :4<4>[ 39.662731@2] changed the Multicast,mcount=1<4>[ 39.662733@2] add mac address:33:33:00:00:00:01,bit=1<4>[ 39.662779@2] changed the Multicast,mcount=2<4>[ 39.662782@2] add mac address:33:33:00:00:00:01,bit=1<4>[ 39.662784@2] add mac address:01:00:5e:00:00:01,bit=32<4>[ 39.662786@2] set hash low=2,high=1<4>[ 39.662787@2] changed the filter setting to :4<6>[ 39.662793@2] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready<4>[ 40.259727@0] write pen_release: 1<4>[ 40.259957@1] CPU1: Booted secondary processor<4>[ 40.385903@0] dhd_module_init in<4>[ 40.385946@0] wifi_setup_dt<4>[ 40.386353@0] wifi_request_32k_clk : ON-->ON for sdio_wifi<4>[ 40.393168@0] interrupt_pin(133) : (null)<4>[ 40.393226@0] reg:2620,clearmask=100010,setmask=0<4>[ 40.393229@0] reg:2622,clearmask=ff,set pin=133<4>[ 40.393231@0] reg:2623,clearmask=70000,setmask=4<4>[ 40.393233@0] interrupt_pin(133) : sdio_wifi<4>[ 40.393234@0] power_on_pin(6) : (null)<4>[ 40.393240@0] power_on_pin(6) : sdio_wifi<4>[ 40.393242@0] power_on_pin2(123) : (null)<4>[ 40.393248@0] power_on_pin2(123) : sdio_wifi<4>[ 40.393939@0] ======== bcm_wlan_set_plat_data ========<4>[ 40.393944@0] host_oob_irq: 100
<4>[ 40.393945@0] host_oob_irq_flags=4<4>[ 40.393947@0] dhd_wifi_platform_load: Enter<4>[ 40.393950@0] Power-up adapter 'DHD generic adapter'<4>[ 40.394591@0] wifi_platform_set_power = 1<4>[ 40.394595@0] ======== PULL WL_REG_ON HIGH! ========<4>[ 40.394605@0] WIFI Disable! 6<4>[ 40.591736@1] avc open<4>[ 40.595576@1] amvenc_avc check CMA pool sucess, max instance: 1.<4>[ 40.597588@1] amvenc_avc_open: allocating phys 2dc00000, size 18432k, wq:eacc5e00.<4>[ 40.597592@1] amvenc_avc memory config sucess, buff start:0x2dc00000, size is 0x1200000, wq:eacc5e00.<4>[ 40.597667@1] avc release, wq:eacc5e00<4>[ 40.597671@1] remove encode_work_queue eacc5e00 sucess, destroy_encode_work_queue line 2408.<4>[ 40.601502@1] ionvideo open<4>[ 40.601514@1] ionvideo_stop_generating!!!!<4>[ 40.601523@1] ionvideo release<4>[ 40.606710@1] ionvideo open<4>[ 40.606718@1] ionvideo_stop_generating!!!!<4>[ 40.606727@1] ionvideo release<4>[ 40.609092@1] ionvideo open<4>[ 40.609099@1] ionvideo_stop_generating!!!!<4>[ 40.609107@1] ionvideo release<4>[ 40.616417@1] ionvideo open<4>[ 40.616424@1] ionvideo_stop_generating!!!!<4>[ 40.616432@1] ionvideo release<4>[ 40.631841@1] ionvideo open<4>[ 40.631848@1] ionvideo_stop_generating!!!!<4>[ 40.631857@1] ionvideo release<4>[ 40.638018@1] ionvideo open<4>[ 40.638027@1] ionvideo_stop_generating!!!!<4>[ 40.638035@1] ionvideo release<4>[ 40.640853@1] ionvideo open<4>[ 40.640861@1] ionvideo_stop_generating!!!!<4>[ 40.640870@1] ionvideo release<4>[ 40.643045@1] ionvideo open<4>[ 40.643052@1] ionvideo_stop_generating!!!!<4>[ 40.643060@1] ionvideo release<4>[ 40.660023@0] write pen_release: 3<4>[ 40.660198@3] CPU3: Booted secondary processor<4>[ 40.731843@3] WIFI Enable! 6<4>[ 41.024316@2] Digital output mode: 0 - PCM<4>[ 41.030114@2] Digital output mode: 0 - PCM<4>[ 41.063886@2] Digital output mode: 0 - PCM<4>[ 41.166333@0] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.<11>[ 43.823240@1] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.823250@1] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.823257@1] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.823262@1] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.823268@1] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.823273@1] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.823278@1] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.823283@1] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.823288@1] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.823293@1] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.823298@1] systemcontrol: [ubootenv] read failed <11>[ 43.823305@1] systemcontrol: [ubootenv] ubootenv.var.firstboot is not a ubootenv varible.<4>[ 41.949599@2] [aml_sdio_timeout][0;40;33m time_start_cnt:995<4>[ 41.949599@2] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x1f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940<4>[ 41.949599@2] [0m[aml_sdio_timeout][0;40;33m time_start_cnt:999<4>[ 41.949599@2] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940<4>[ 41.949599@2] [0m[aml_sdio_timeout][0;40;33m time_start_cnt:996<4>[ 41.949599@2] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940<4>[ 43.949719@2] [0m<4>[ 43.958051@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes)<4>[ 43.959390@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 43.960772@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 43.963206@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes)<6>[ 44.052022@2] sdio: new high speed SDIO card at address 0001, clock 35416666, 4-bit-bus-width<4>[ 44.052923@2] [sdio_reinit] finish<11>[ 44.062805@0] dig: data_integrity_guard isBootCompleted:1!<11>[ 44.063978@0] dig: dig set_data_ro_count count:0!<4>[ 44.259636@2] wifi_platform_bus_enumerate device present 1<4>[ 44.259640@2] ======== Card detection to detect SDIO card! ========<4>[ 44.275835@2] bcmsdh_register: register client driver<4>[ 44.278274@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter<4>[ 44.278417@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter<4>[ 44.278424@2] bus num (host idx)=1, slot num (rca)=1<4>[ 44.278430@2] found adapter info 'DHD generic adapter'<4>[ 44.306412@2] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0<4>[ 44.310090@2] DHD: dongle ram size is set to 294912(orig 294912) at 0x0<4>[ 44.316519@2] dhdsdio_probe: Disable prop_txstatus<4>[ 44.323590@2] wl_create_event_handler(): thread:wl_event_handler:4a4 started<4>[ 44.323872@3] tsk Enter, tsk = 0xf38af44c<4>[ 44.324485@2] dhd_attach(): thread:dhd_watchdog_thread:4a5 started<4>[ 44.324517@2] dhd_attach(): thread:dhd_dpc:4a6 started<4>[ 44.324558@2] dhd_attach(): thread:dhd_rxf:4a7 started<4>[ 44.324564@2] dhd_deferred_work_init: work queue initialized <4>[ 44.324707@2] Dongle Host Driver, version 1.141.66.1 (r483454)<4>[ 44.324707@2] Compiled in drivers/net/wireless/bcmdhd on Feb 3 2016 at 12:12:00<4>[ 44.326953@2] Register interface [wlan0] MAC: 00:90:4c:11:22:33<4>[ 44.326953@2] <4>[ 44.326961@2] dhd_prot_ioctl : bus is down. we have nothing to do<4>[ 44.327042@2] bcmsdh_oob_intr_unregister: Enter<4>[ 44.327045@2] bcmsdh_oob_intr_unregister: irq is not registered<4>[ 44.327056@2] dhd_bus_devreset: WLAN OFF DONE<4>[ 44.327121@2] wifi_platform_set_power = 0<4>[ 44.327125@2] ======== PULL WL_REG_ON LOW! ========<4>[ 44.327747@2] dhd_module_init: Exit err=0<4>[ 44.950945@3] dhd_open: Enter ebcea800<4>[ 44.950978@3] <4>[ 44.950978@3] Dongle Host Driver, version 1.141.66.1 (r483454)<4>[ 44.950978@3] Compiled in drivers/net/wireless/bcmdhd on Feb 3 2016 at 12:12:00<4>[ 44.965541@3] wl_android_wifi_on in 1<4>[ 44.965547@3] wl_android_wifi_on in 2: g_wifi_on=0<4>[ 44.965550@3] wifi_platform_set_power = 1<4>[ 44.965552@3] ======== PULL WL_REG_ON HIGH! ========<4>[ 44.965562@3] WIFI Disable! 6<4>[ 45.171755@1] WIFI Enable! 6<4>[ 45.381239@2] sdio_reset_comm():<4>[ 45.395376@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes)<4>[ 45.397185@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 45.402824@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 45.409986@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes)<4>[ 45.460733@2] [sdio_reinit] finish<7>[ 45.555316@2] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 45.555473@2] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 45.556711@2] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 45.556714@2] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 45.556716@2] iec958 mode PCM16<4>[ 45.556720@2] IEC958 16bit<4>[ 45.556727@2] hdmitx: audio: aout notify rate 48000<4>[ 45.556729@2] hdmitx: audio: aout notify size 16<4>[ 45.556730@2] hdmitx: audio: no update<6>[ 45.556732@2] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 45.556774@1] enter aml_set_bias_level level: 2<7>[ 45.556791@1] enter aml_set_bias_level level: 2<7>[ 45.556796@2] enter aml_set_bias_level level: 1<7>[ 45.556798@2] enter aml_set_bias_level level: 2<4>[ 45.556807@2] speaker_events--mute =1<7>[ 45.569639@2] enter aml_set_bias_level level: 3<7>[ 45.569643@2] enter aml_set_bias_level level: 3<6>[ 45.569976@2] [aml-i2s-dai]aiu i2s playback enable<6>[ 45.569976@2] <6>[ 45.569977@2] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 45.669960@2] <4>[ 45.669960@2] <4>[ 45.669960@2] dhd_bus_devreset: == WLAN ON ==<4>[ 45.674005@2] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0<4>[ 45.680635@2] DHD: dongle ram size is set to 294912(orig 294912) at 0x0<4>[ 45.691743@2] dhd_conf_read_config: fw_count=4<4>[ 45.691747@2] dhd_conf_read_config: name=fw_bcm4339a0e_ag.bin, mac_count=5<4>[ 45.691755@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.691759@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.691764@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.691768@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.691773@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.691777@2] dhd_conf_read_config: name=fw_bcm4339a0e_ag_p2p.bin, mac_count=5<4>[ 45.691780@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.691784@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.691789@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.691793@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.691796@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.691799@2] dhd_conf_read_config: name=fw_bcm4339a0e_ag_apsta.bin, mac_count=5<4>[ 45.691805@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.691808@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.691812@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.691818@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.691821@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.691825@2] dhd_conf_read_config: name=fw_bcm4339a0e_ag_mfg.bin, mac_count=5<4>[ 45.691829@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.691832@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.691838@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.691842@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.691845@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.691891@2] dhd_conf_read_config: nv_count=1<4>[ 45.691893@2] dhd_conf_read_config: name=nvram_ap6335e.txt, mac_count=5<4>[ 45.691897@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.691901@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.691906@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.691909@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.691913@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.692729@2] dhd_conf_read_config: bcn_timeout = 20<4>[ 45.692839@2] dhd_conf_read_config: kso_enable = 0<4>[ 45.692882@2] dhd_conf_set_fw_name_by_chip: firmware_path=/etc/wifi/40183/fw_bcm40183b2.bin<4>[ 45.692884@2] dhd_conf_set_nv_name_by_chip: yxg ----nv_path=/etc/wifi/40183/ap6330_nvram.txt<4>[ 45.692892@2] sdioh_cis_read: func_cis_ptr[0]=0x1070<4>[ 45.702774@2] dhd_conf_set_fw_name_by_mac: fw_typ=0 != fw_type_new=2<4>[ 45.702778@2] dhd_conf_set_fw_name_by_mac: fw_typ=0 != fw_type_new=1<4>[ 45.702780@2] dhd_conf_set_fw_name_by_mac: fw_typ=0 != fw_type_new=3<4>[ 45.702783@2] sdioh_cis_read: func_cis_ptr[0]=0x1070<4>[ 46.004328@2] Final fw_path=/etc/wifi/40183/fw_bcm40183b2.bin<4>[ 46.004330@2] Final nv_path=/etc/wifi/40183/ap6330_nvram.txt<4>[ 46.004333@2] Final conf_path=/system/etc/wifi/config.txt<4>[ 46.053784@2] sdioh_request_buffer: [1] doing memory copy buf=ed6f7000, len=1939<4>[ 46.054208@2] NVRAM version: AP6330_NVRAM_V1.0_20121130
<4>[ 46.054746@2] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.<4>[ 46.320994@0] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)<4>[ 46.323879@1] bcmsdh_oob_intr_register: Enter<4>[ 46.327482@1] bcmsdh_oob_intr_register OOB irq=100 flags=4<4>[ 46.335814@1] bcmsdh_oob_intr_register: enable_irq_wake<4>[ 46.339586@1] dhd_conf_set_band: Set band 0<4>[ 46.343910@0] Firmware up: op_mode=0x0005, MAC=6c:fa:a7:5a:78:44<4>[ 46.343915@0] dhd_conf_set_country: Set country US, revision 0<4>[ 46.417337@0] Country code: US (US/0)<4>[ 46.417642@0] dhd_conf_set_roam: Set roam_off 1<4>[ 46.419921@0] dhd_preinit_ioctls Set ampdu_ba_wsize to 32 failed -2<4>[ 46.420339@0] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23<4>[ 46.420840@0] dhd_preinit_ioctls buf_key_b4_m4 set failed -23<4>[ 46.449772@2] Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5<4>[ 46.449779@2] Driver: 1.141.66.1 (r483454)<4>[ 46.449779@2] Firmware: wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 <4>[ 46.458790@2] dhd_preinit_ioctls wl ampdu_hostreorder failed -23<4>[ 46.471614@2] wl_android_wifi_on: Success<4>[ 46.558063@0] dhd_open: Exit ret=0<4>[ 46.999330@0] dhd_set_suspend: Remove extra suspend setting<6>[ 48.575527@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 48.575527@0] <6>[ 48.576437@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 48.581339@0] IEC958 16bit<4>[ 48.583849@0] hdmitx: audio: aout notify rate 48000<4>[ 48.588768@0] hdmitx: audio: aout notify size 16<4>[ 48.593285@0] hdmitx: audio: no update<4>[ 48.597004@0] aml_i2s_close device type 8 <7>[ 49.730657@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 49.730821@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 49.730824@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 49.730826@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 49.730829@0] iec958 mode PCM16<4>[ 49.730833@0] IEC958 16bit<4>[ 49.730837@0] hdmitx: audio: aout notify rate 48000<4>[ 49.730838@0] hdmitx: audio: aout notify size 16<4>[ 49.730839@0] hdmitx: audio: no update<6>[ 49.730841@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 49.730896@0] enter aml_set_bias_level level: 1<7>[ 49.730898@0] enter aml_set_bias_level level: 2<6>[ 49.731311@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 49.731311@0] <6>[ 49.731313@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 51.366930@0] BT_RADIO going: off<6>[ 51.366958@0] BCM_BT: going OFF<6>[ 51.389775@0] BT_RADIO going: on<6>[ 51.389810@0] BCM_BT: going ON<7>[ 51.449864@1] config uart_a_ttyS1:: Character length 8bits/char<6>[ 51.469616@1] Changing uart_a_ttyS1: baud from 0 to 115200<7>[ 51.489612@1] config uart_a_ttyS1:: Character length 8bits/char<7>[ 51.494486@1] config uart_a_ttyS1:: Character length 8bits/char<6>[ 51.509652@1] Changing uart_a_ttyS1: baud from 115200 to 2000000<7>[ 52.001179@2] config uart_a_ttyS1:: Character length 8bits/char<6>[ 52.019583@2] Changing uart_a_ttyS1: baud from 2000000 to 115200<7>[ 52.241784@2] config uart_a_ttyS1:: Character length 8bits/char<6>[ 52.259588@2] Changing uart_a_ttyS1: baud from 115200 to 2000000<6>[ 52.736697@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 52.736697@0] <6>[ 52.737591@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 52.742322@0] IEC958 16bit<4>[ 52.744975@0] hdmitx: audio: aout notify rate 48000<4>[ 52.749855@0] hdmitx: audio: aout notify size 16<4>[ 52.754419@0] hdmitx: audio: no update<4>[ 52.758156@0] aml_i2s_close device type 8 <7>[ 52.859599@1] -----hotplug:2<4>[ 52.950029@3] IRQ95 no longer affine to CPU3<5>[ 52.950284@0] CPU3: shutdown<4>[ 53.071993@1] IRQ93 no longer affine to CPU1<5>[ 53.072259@0] CPU1: shutdown<3>[ 53.431444@0] EXT4-fs (sdb): unable to read superblock<4>[ 55.959932@0] write pen_release: 1<4>[ 55.960132@1] CPU1: Booted secondary processor<4>[ 56.660052@0] write pen_release: 3<4>[ 56.660335@3] CPU3: Booted secondary processor<7>[ 57.171490@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 57.171666@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 57.171669@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 57.171672@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 57.171675@0] iec958 mode PCM16<4>[ 57.171679@0] IEC958 16bit<4>[ 57.171682@0] hdmitx: audio: aout notify rate 48000<4>[ 57.171684@0] hdmitx: audio: aout notify size 16<4>[ 57.171686@0] hdmitx: audio: no update<6>[ 57.171689@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 57.171743@1] enter aml_set_bias_level level: 1<7>[ 57.171746@1] enter aml_set_bias_level level: 2<6>[ 57.172458@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 57.172458@0] <6>[ 57.172461@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 59.217820@2] Connectting with ca:60:00:95:2b:c8 channel (36) ssid "tomato_5G", len (9)<4>[ 59.217820@2] <4>[ 59.691028@0] wl_bss_connect_done succeeded with ca:60:00:95:2b:c8<7>[ 59.759579@0] -----hotplug:2<4>[ 59.779157@0] wl_bss_connect_done succeeded with ca:60:00:95:2b:c8<4>[ 59.849896@2] IRQ94 no longer affine to CPU2<5>[ 59.850136@0] CPU2: shutdown<4>[ 59.969962@1] IRQ93 no longer affine to CPU1<5>[ 59.970207@0] CPU1: shutdown<4>[ 60.097531@3] dhd_set_suspend: Remove extra suspend setting<4>[ 60.105201@3] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 60.106611@3] ANDROID-ERROR) failed to getting batching results<4>[ 60.119849@3] dhd_pno_stop_for_batch : wifi location service is not supported<4>[ 60.121348@3] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL<4>[ 60.128885@3] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL<3>[ 60.136470@3] ANDROID-ERROR) failed to stop batching scan<6>[ 60.177903@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 60.177903@0] <6>[ 60.178798@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 60.183544@0] IEC958 16bit<4>[ 60.186181@0] hdmitx: audio: aout notify rate 48000<4>[ 60.191087@0] hdmitx: audio: aout notify size 16<4>[ 60.195623@0] hdmitx: audio: no update<4>[ 60.199352@0] aml_i2s_close device type 8 <4>[ 61.360202@0] write pen_release: 1<4>[ 61.360502@1] CPU1: Booted secondary processor<4>[ 61.469584@0] function[set_tm1628_led_value] line 228 display string: 15:55 .<4>[ 61.759853@0] write pen_release: 2<4>[ 61.760107@2] CPU2: Booted secondary processor<7>[ 63.078230@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 63.078381@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 63.079677@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 63.085164@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 63.092289@0] iec958 mode PCM16<4>[ 63.094966@0] IEC958 16bit<4>[ 63.097674@0] hdmitx: audio: aout notify rate 48000<4>[ 63.102603@0] hdmitx: audio: aout notify size 16<4>[ 63.107258@0] hdmitx: audio: no update<6>[ 63.110881@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 63.117096@1] enter aml_set_bias_level level: 1<7>[ 63.117100@1] enter aml_set_bias_level level: 2<6>[ 63.118939@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 63.118939@0] <6>[ 63.118941@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 66.124381@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 66.124381@0] <6>[ 66.125276@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 66.130015@0] IEC958 16bit<4>[ 66.132673@0] hdmitx: audio: aout notify rate 48000<4>[ 66.137620@0] hdmitx: audio: aout notify size 16<4>[ 66.142231@0] hdmitx: audio: no update<4>[ 66.145874@0] aml_i2s_close device type 8 <6>[ 67.082033@1] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.<7>[ 67.359616@2] -----hotplug:2<4>[ 67.432395@1] IRQ93 no longer affine to CPU1<5>[ 67.432671@0] CPU1: shutdown<4>[ 67.539928@2] IRQ94 no longer affine to CPU2<5>[ 67.540189@0] CPU2: shutdown<4>[ 67.859935@0] write pen_release: 1<4>[ 67.860119@1] CPU1: Booted secondary processor<4>[ 68.160268@0] write pen_release: 2<4>[ 68.160595@2] CPU2: Booted secondary processor<11>[ 69.559472@0] init: untracked pid 2344 exited with status 0<7>[ 70.594143@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 70.594308@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 70.595565@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 70.601088@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 70.607817@0] iec958 mode PCM16<4>[ 70.611067@0] IEC958 16bit<4>[ 70.613562@0] hdmitx: audio: aout notify rate 48000<4>[ 70.618401@0] hdmitx: audio: aout notify size 16<4>[ 70.623065@0] hdmitx: audio: no update<6>[ 70.626722@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 70.632920@1] enter aml_set_bias_level level: 1<7>[ 70.632931@1] enter aml_set_bias_level level: 2<6>[ 70.633658@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 70.633658@0] <6>[ 70.639146@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 76.076643@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 76.076643@0] <6>[ 76.077544@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 76.082360@0] IEC958 16bit<4>[ 76.084957@0] hdmitx: audio: aout notify rate 48000<4>[ 76.089894@0] hdmitx: audio: aout notify size 16<4>[ 76.094412@0] hdmitx: audio: no update<4>[ 76.098146@0] aml_i2s_close device type 8 <7>[ 76.477336@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 76.477477@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 76.478746@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 76.484482@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 76.494506@0] iec958 mode PCM16<4>[ 76.494617@0] IEC958 16bit<4>[ 76.496777@0] hdmitx: audio: aout notify rate 48000<4>[ 76.501748@0] hdmitx: audio: aout notify size 16<4>[ 76.506504@0] hdmitx: audio: no update<6>[ 76.510047@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 76.516243@2] enter aml_set_bias_level level: 1<7>[ 76.516252@2] enter aml_set_bias_level level: 2<6>[ 76.516839@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 76.516839@0] <6>[ 76.522319@0] [aml-i2s-dai]audio_hw_958_enable 1<11>[ 77.340965@2] init: untracked pid 2347 exited with status 0<11>[ 77.441729@3] init: untracked pid 2444 exited with status 156<11>[ 77.657587@2] init: untracked pid 2446 exited with status 0<7>[ 79.159584@1] -----hotplug:3<4>[ 79.249897@1] IRQ93 no longer affine to CPU1<5>[ 79.250153@0] CPU1: shutdown<4>[ 79.399908@2] IRQ94 no longer affine to CPU2<5>[ 79.400158@0] CPU2: shutdown<11>[ 80.292499@0] init: untracked pid 2760 exited with status 159<11>[ 80.509841@0] init: untracked pid 2762 exited with status 0<6>[ 82.877508@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 82.877508@0] <6>[ 82.878483@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 82.884053@0] IEC958 16bit<4>[ 82.885911@0] hdmitx: audio: aout notify rate 48000<4>[ 82.891838@0] hdmitx: audio: aout notify size 16<4>[ 82.895336@0] hdmitx: audio: no update<4>[ 82.899117@0] aml_i2s_close device type 8 <4>[ 83.511694@3] IRQ95 no longer affine to CPU3<5>[ 83.511934@0] CPU3: shutdown<4>[ 83.879579@0] function[set_tm1628_led_value] line 228 display string: 15:56 .<4>[ 85.969760@0] write pen_release: 1<4>[ 85.969906@1] CPU1: Booted secondary processor<7>[ 87.909806@0] enter aml_set_bias_level level: 2<7>[ 87.909817@0] enter aml_set_bias_level level: 2<7>[ 87.909825@0] enter aml_set_bias_level level: 1<7>[ 87.909828@0] enter aml_set_bias_level level: 2<4>[ 87.909875@0] speaker_events--mute =0<7>[ 87.909925@0] enter aml_set_bias_level level: 1<7>[ 87.909933@0] enter aml_set_bias_level level: 1<7>[ 90.279870@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 90.280291@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 90.281563@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 90.287095@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 90.294169@0] iec958 mode PCM16<4>[ 90.296877@0] IEC958 16bit<4>[ 90.299538@0] hdmitx: audio: aout notify rate 48000<4>[ 90.304780@0] hdmitx: audio: aout notify size 16<4>[ 90.309038@0] hdmitx: audio: no update<6>[ 90.312961@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 90.318969@1] enter aml_set_bias_level level: 2<7>[ 90.318998@1] enter aml_set_bias_level level: 2<7>[ 90.319019@1] enter aml_set_bias_level level: 1<7>[ 90.319033@1] enter aml_set_bias_level level: 2<4>[ 90.319075@0] speaker_events--mute =1<7>[ 90.329713@1] enter aml_set_bias_level level: 3<7>[ 90.329746@1] enter aml_set_bias_level level: 3<6>[ 90.331305@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 90.331305@0] <6>[ 90.332134@0] [aml-i2s-dai]audio_hw_958_enable 1<11>[ 90.733930@0] init: untracked pid 2806 exited with status 142<11>[ 90.946950@0] init: untracked pid 2809 exited with status 0<6>[ 93.337704@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 93.337704@0] <6>[ 93.338621@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 93.343495@0] IEC958 16bit<4>[ 93.346031@0] hdmitx: audio: aout notify rate 48000<4>[ 93.350950@0] hdmitx: audio: aout notify size 16<4>[ 93.355492@0] hdmitx: audio: no update<4>[ 93.359200@0] aml_i2s_close device type 8 <4>[ 93.731873@1] IRQ93 no longer affine to CPU1<5>[ 93.732123@0] CPU1: shutdown<7>[ 96.444661@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 96.445538@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 96.446844@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 96.454979@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 96.459055@0] iec958 mode PCM16<4>[ 96.462333@0] IEC958 16bit<4>[ 96.464815@0] hdmitx: audio: aout notify rate 48000<4>[ 96.469960@0] hdmitx: audio: aout notify size 16<4>[ 96.474304@0] hdmitx: audio: no update<6>[ 96.477985@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 96.484880@0] enter aml_set_bias_level level: 1<7>[ 96.484939@0] enter aml_set_bias_level level: 2<6>[ 96.487704@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 96.487704@0] <6>[ 96.490407@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 96.890230@0] write pen_release: 1<4>[ 96.890406@1] CPU1: Booted secondary processor<11>[ 97.005447@1] init: untracked pid 2829 exited with status 204<11>[ 97.238537@1] init: untracked pid 2832 exited with status 0
Comments