<6>[ 0.000000@0] Booting Linux on physical CPU 0x200<6>[ 0.000000@0] Initializing cgroup subsys cpu<6>[ 0.000000@0] Initializing cgroup subsys cpuacct<5>[ 0.000000@0] Linux version 3.10.33-gfa4a182-dirty (user@DroidBOX) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Wed Feb 3 12:09:36 CET 2016<4>[ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d<4>[ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache<6>[ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC<4>[ 0.000000@0] physical memory start address is 0x200000<6>[ 0.000000@0] reserved_end is 1d9fffff <6>[ 0.000000@0] <6>[ 0.000000@0] Total memory is 2046 MiB<6>[ 0.000000@0] Reserved low memory from 0x06000000 to 0x1d9fffff, size: 378 MiB <6>[ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)<6>[ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)<6>[ 0.000000@0] deinterlace0(high) : 0x7df00000 - 0x80000000 ( 33 MiB)<6>[ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB)<6>[ 0.000000@0] vdec0(low) : 0x09a00000 - 0x19a00000 (256 MiB)<6>[ 0.000000@0] ppmgr0(high) : 0x7bf00000 - 0x7df00000 ( 32 MiB)<6>[ 0.000000@0] vdin00(low) : 0x19a00000 - 0x1aa00000 ( 16 MiB)<6>[ 0.000000@0] vdin10(low) : 0x1aa00000 - 0x1ba00000 ( 16 MiB)<6>[ 0.000000@0] amlvideo20(low) : 0x1ba00000 - 0x1d200000 ( 24 MiB)<6>[ 0.000000@0] amvideocap0(low) : 0x1d200000 - 0x1da00000 ( 8 MiB)<4>[ 0.000000@0] get storage device: storage 4<4>[ 0.000000@0] value=4<4>[ 0.000000@0] get_storage_device : get storage device: storage 4<4>[ 0.000000@0] get_storage_device : value=4<4>[ 0.000000@0] [get_storage_device] storage_flag=4<4>[ 0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=4<6>[ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000<6>[ 0.000000@0] cma: Found region@0, memory base 0, size 18 MiB<6>[ 0.000000@0] cma: CMA: reserved 20 MiB at 2dc00000<4>[ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc<7>[ 0.000000@0] On node 0 totalpages: 406784<7>[ 0.000000@0] free_area_init_node: node 0, pgdat c0c961c0, node_mem_map c0f7a000<7>[ 0.000000@0] Normal zone: 1520 pages used for memmap<7>[ 0.000000@0] Normal zone: 0 pages reserved<7>[ 0.000000@0] Normal zone: 94208 pages, LIFO batch:31<7>[ 0.000000@0] HighMem zone: 2442 pages used for memmap<7>[ 0.000000@0] HighMem zone: 312576 pages, LIFO batch:31<6>[ 0.000000@0] Meson chip version = RevB (19:B - 0:27ED)<6>[ 0.000000@0] PERCPU: Embedded 9 pages/cpu @c1f09000 s13120 r8192 d15552 u36864<7>[ 0.000000@0] pcpu-alloc: s13120 r8192 d15552 u36864 alloc=9*4096<7>[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 <4>[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 405264<5>[ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200n8 no_console_suspend earlyprintk ramoops.mem_address=0x04e00000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive storage=4 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x07900000,1080p,full hdmimode=1080p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx= mac=00:11:6d:09:09:67<4>[ 0.000000@0] cvbs performance line = 0<4>[ 0.000000@0] cvbs trimming line = 0xa000<4>[ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0<4>[ 0.000000@0] osd1:1<4>[ 0.000000@0] loaded:268435459<4>[ 0.000000@0] logo has been loaded<4>[ 0.000000@0] 1080p:15<4>[ 0.000000@0] full:2<4>[ 0.000000@0] kernel get hdmimode form uboot is 1080p<4>[ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs<4>[ 0.000000@0] ******** uboot setup mac-addr: 0:11:6d:9:9:67<6>[ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)<6>[ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<6>[ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<6>[ 0.000000@0] Memory: 64MB 16MB 1509MB = 1589MB total<5>[ 0.000000@0] Memory: 1564920k/1564920k available, 62216k reserved, 1250304K highmem<5>[ 0.000000@0] Virtual kernel memory layout:<5>[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)<5>[ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)<5>[ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)<5>[ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)<5>[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)<5>[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)<5>[ 0.000000@0] .text : 0xc0008000 - 0xc0b83bc0 (11759 kB)<5>[ 0.000000@0] .init : 0xc0b84000 - 0xc0be3340 ( 381 kB)<5>[ 0.000000@0] .data : 0xc0be4000 - 0xc0c9d0e8 ( 741 kB)<5>[ 0.000000@0] .bss : 0xc0c9d0e8 - 0xc0f75f94 (2916 kB)<6>[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1<6>[ 0.000000@0] Preemptible hierarchical RCU implementation.<6>[ 0.000000@0] NR_IRQS:256<6>[ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms<7>[ 0.000000@0] Global timer: MESON TIMER-F (c0c03ac0) initialized<6>[ 0.000000@0] Switching to timer-based delay loop<7>[ 0.000000@0] meson_serial_console_setup<6>[ 0.000000@0] console [ttyS0] enabled<6>[ 0.403538@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)<6>[ 0.413823@0] pid_max: default: 32768 minimum: 301<6>[ 0.418706@0] Security Framework initialized<6>[ 0.422866@0] SELinux: Disabled at boot.<6>[ 0.426892@0] Mount-cache hash table entries: 512<6>[ 0.434751@0] Initializing cgroup subsys debug<6>[ 0.435931@0] Initializing cgroup subsys freezer<6>[ 0.440599@0] CPU: Testing write buffer coherency: ok<6>[ 0.445843@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200<6>[ 0.451423@0] Setting up static identity map for 0xc07f1970 - 0xc07f19c8<6>[ 0.458121@0] L310 cache controller enabled<6>[ 0.462227@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B<6>[ 0.469732@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000<6>[ 0.477885@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222<4>[ 0.560145@0] write pen_release: 1<4>[ 0.560321@1] CPU1: Booted secondary processor<6>[ 0.560334@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201<4>[ 0.580146@0] write pen_release: 2<4>[ 0.588288@2] CPU2: Booted secondary processor<6>[ 0.588299@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202<4>[ 0.600137@0] write pen_release: 3<4>[ 0.608278@3] CPU3: Booted secondary processor<6>[ 0.608290@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203<6>[ 0.608357@0] Brought up 4 CPUs<6>[ 0.621489@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).<6>[ 0.627718@0] CPU: All CPU(s) started in SVC mode.<6>[ 0.632974@0] devtmpfs: initialized<4>[ 0.640574@0] clkrate [ xtal ] : 24000000<4>[ 0.640603@0] clkrate [ pll_sys ] : 1200000000<4>[ 0.644535@0] clkrate [ pll_fixed ] : 2550000000<4>[ 0.649216@0] clkrate [ pll_vid ] : 366000000<4>[ 0.653644@0] TODO: clk_get_rate_hpll() is not implement in M8 now<4>[ 0.659790@0] clkrate [ pll_hpll ] : 0<4>[ 0.663610@0] clkrate [ pll_ddr ] : 0<4>[ 0.667333@0] clkrate [ a9_clk ] : 1200000000<4>[ 0.671759@0] clkrate [ clk81 ] : 141666666<6>[ 0.676749@0] pinctrl core: initialized pinctrl subsystem<6>[ 0.681549@0] regulator-dummy: no parameters<6>[ 0.686473@0] NET: Registered protocol family 16<6>[ 0.696084@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations<6>[ 0.697672@0] ramoops: using module parameters<4>[ 0.702167@0] pstore przs=0xf0010000<4>[ 0.705556@0] pstore cprz=0xf0008000<6>[ 0.709472@0] console [pstore-1] enabled<3>[ 0.713018@0] ram_console: failed to create proc entry<4>[ 0.719007@0] VPU driver version: v03<4>[ 0.721774@0] vpu driver detect cpu type: m8<4>[ 0.726012@0] load vpu_clk in dts: 364300000Hz(7)<4>[ 0.730709@0] vpu_probe OK<6>[ 0.733614@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device<6>[ 0.742389@0] amlogic_gpio gpio: Probed amlogic GPIO driver<4>[ 0.746173@0] register lm device lm-root<4>[ 0.749971@0] register lm device lm1<4>[ 0.753530@0] register lm device lm0<4>[ 0.757163@0] Init pinux probe!<6>[ 0.760556@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver<4>[ 0.765901@0] tv_init_module<4>[ 0.768750@0] major number 254 for disp<4>[ 0.772568@0] vout_register_server<4>[ 0.775940@0] register tv module server ok<4>[ 0.780038@0] major number 0 for disp<4>[ 0.783655@0] register tv module server ok<4>[ 0.787740@0] video2_early_init enter<4>[ 0.791376@0] video2_early_init exit<6>[ 0.794946@0] aml_i2c version: 20140813<7>[ 0.798783@0] plat->state_name:default<7>[ 0.798793@0] master_no = 0, master_regs=fe600500<6>[ 0.798863@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ed73d0a8)<6>[ 0.804818@0] aml-i2c i2c-AO: aml i2c bus driver.<7>[ 0.809513@0] plat->state_name:default<7>[ 0.809523@0] master_no = 1, master_regs=fe108500<6>[ 0.809579@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ed73d4a8)<6>[ 0.815478@0] aml-i2c i2c-A: aml i2c bus driver.<7>[ 0.820104@0] plat->state_name:default<7>[ 0.820113@0] master_no = 2, master_regs=fe1087c0<6>[ 0.820178@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ed73d8a8)<6>[ 0.826045@0] aml-i2c i2c-B: aml i2c bus driver.<7>[ 0.830672@0] plat->state_name:default<7>[ 0.830682@0] master_no = 3, master_regs=fe1087e0<6>[ 0.830733@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ed73dca8)<6>[ 0.836619@0] aml-i2c i2c-C: aml i2c bus driver.<4>[ 0.841276@0] aml_pmu_init, 458<4>[ 0.844348@0] call aml_dvfs_init in<7>[ 0.847840@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs<7>[ 0.847847@0] [DVFS]dvfs table of vcck_dvfs is:<7>[ 0.847853@0] [DVFS] freq, min_uV, max_uV<7>[ 0.847858@0] [DVFS] 96000, 825000, 825000<7>[ 0.847862@0] [DVFS] 192000, 825000, 825000<7>[ 0.847866@0] [DVFS] 312000, 825000, 825000<7>[ 0.847870@0] [DVFS] 408000, 825000, 825000<7>[ 0.847875@0] [DVFS] 504000, 825000, 825000<7>[ 0.847879@0] [DVFS] 600000, 850000, 850000<7>[ 0.847883@0] [DVFS] 720000, 850000, 850000<7>[ 0.847887@0] [DVFS] 816000, 875000, 875000<7>[ 0.847891@0] [DVFS] 1008000, 925000, 925000<7>[ 0.847896@0] [DVFS] 1200000, 975000, 975000<7>[ 0.847900@0] [DVFS] 1416000, 1025000, 1025000<7>[ 0.847904@0] [DVFS] 1608000, 1100000, 1100000<7>[ 0.847908@0] [DVFS] 1800000, 1125000, 1125000<7>[ 0.847913@0] [DVFS] 1992000, 1150000, 1150000<4>[ 0.847962@0] hdmitx: system: amhdmitx_init<4>[ 0.851969@0] hdmitx: system: Ver: 2014May6<4>[ 0.856175@0] hdmitx: system: amhdmitx_probe<4>[ 0.860512@0] hdmitx: system: not find cec config<4>[ 0.865049@0] hdmitx: system: not find vend_init_data<4>[ 0.870175@0] hdmitx: system: gate/pwr cmd: 7<4>[ 0.874413@0] hdmitx: system: ALREADY init VIC = 16<4>[ 0.879265@0] hdmitx: system: gate/pwr cmd: 0<4>[ 0.883997@1] hdmitx: system: reset intr mask<4>[ 0.900358@0] hdmitx: system: irq 1<6>[ 0.914005@0] bio: create slab <bio-0> at 0<5>[ 0.914407@0] SCSI subsystem initialized<6>[ 0.916559@0] usbcore: registered new interface driver usbfs<6>[ 0.922124@0] usbcore: registered new interface driver hub<6>[ 0.927596@0] usbcore: registered new device driver usb<6>[ 0.932828@0] Linux video capture interface: v2.00<6>[ 0.937538@0] pps_core: LinuxPPS API ver. 1 registered<6>[ 0.942635@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]><6>[ 0.951917@0] PTP clock support registered<4>[ 0.956216@0] mode is 15,sync_duration_den=1,sync_duration_num=60<4>[ 0.962057@0] TV mode 1080p selected.<4>[ 0.965690@0] already display in uboot<4>[ 0.969412@0] vinfo mode is: 1080p<4>[ 0.974773@0] call aml_pmu_probe_init in<4>[ 0.976739@0] aml_pmus_probe, child name:rn5t618<4>[ 0.981304@0] aml_pmus_probe, i2c_bus:i2c_bus_ao<4>[ 0.986159@0] board_has_battery:false<7>[ 0.989526@0] [DVFS]aml_dvfs_register_driver, driver rn5t618-dvfs regist success, mask:7, source id:1<7>[ 0.989532@0] [RN5T618]ricoh_pmu_probe, 287<7>[ 0.990327@0] [RN5T618]coulomb_flag:0x00<7>[ 0.990332@0] [RN5T618]no saved coulomb counter<7>[ 0.990378@0] ricoh_pmu_probe, 302<4>[ 0.990386@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t618, type:ricoh_pmu<6>[ 0.998309@0] Advanced Linux Sound Architecture Driver Initialized.<6>[ 1.004638@0] Bluetooth: Core ver 2.16<6>[ 1.008093@0] NET: Registered protocol family 31<6>[ 1.012679@0] Bluetooth: HCI device and connection manager initialized<6>[ 1.019177@0] Bluetooth: HCI socket layer initialized<4>[ 1.020725@1] hdmitx: system: gate/pwr cmd: 4<6>[ 1.028539@0] Bluetooth: L2CAP socket layer initialized<6>[ 1.033749@0] Bluetooth: SCO socket layer initialized<6>[ 1.038902@0] cfg80211: Calling CRDA to update world regulatory domain<6>[ 1.046375@0] Switching to clocksource Timer-E<6>[ 1.061447@0] NET: Registered protocol family 2<6>[ 1.061825@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes)<6>[ 1.067592@0] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)<6>[ 1.074188@0] TCP: Hash tables configured (established 4096 bind 4096)<6>[ 1.080674@0] TCP: reno registered<6>[ 1.084012@0] UDP hash table entries: 256 (order: 1, 8192 bytes)<6>[ 1.090009@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)<6>[ 1.096554@0] NET: Registered protocol family 1<4>[ 1.101005@0] wifi_dev_probe<4>[ 1.103773@0] wifi_dt : interrupt_pin=GPIOX_21<4>[ 1.108194@0] wifi_dt : irq_num=null<4>[ 1.111758@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH<4>[ 1.116864@0] wifi_dt : power_on_pin=GPIOAO_6<4>[ 1.121208@0] wifi_dt : power_on_pin2=GPIOX_11<4>[ 1.125618@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=122<6>[ 1.134567@0] Unpacking initramfs...<6>[ 1.183286@0] Freeing initrd memory: 1100K (c4e09000 - c4f1c000)<6>[ 1.184813@0] audit: initializing netlink socket (disabled)<5>[ 1.189224@0] type=2000 audit(1.060:1): initialized<7>[ 1.194454@1] balance_pgdat end zone=0, pgdat_is_balanced=0<4>[ 1.194546@0] bounce pool size: 64 pages<5>[ 1.200908@0] VFS: Disk quotas dquot_6.5.2<4>[ 1.202181@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<6>[ 1.209893@0] exFAT: Core Version 1.2.4<6>[ 1.212521@0] exFAT: FS Version 1.2.4<6>[ 1.216855@0] NTFS driver 2.1.30 [Flags: R/O].<6>[ 1.220776@0] fuse init (API version 7.22)<6>[ 1.224988@0] msgmni has been set to 672<6>[ 1.229249@0] NET: Registered protocol family 38<6>[ 1.233276@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)<4>[ 1.240036@1] hdmitx: system: gate/pwr cmd: 5<4>[ 1.240038@1] hdmitx: edid: edid ready<4>[ 1.240039@1] hdmitx: system: gate/pwr cmd: 4<6>[ 1.253106@0] io scheduler noop registered<6>[ 1.257162@0] io scheduler deadline registered<6>[ 1.261675@0] io scheduler cfq registered (default)<6>[ 1.268886@0] loop: module loaded<6>[ 1.270143@0] tun: Universal TUN/TAP device driver, 1.6<6>[ 1.274931@0] tun: (C) 1999-2004 Max Krasnyansky <[email protected]><6>[ 1.281374@0] PPP generic driver version 2.4.2<6>[ 1.285767@0] PPP BSD Compression module registered<6>[ 1.290544@0] PPP Deflate Compression module registered<6>[ 1.295741@0] PPP MPPE Compression module registered<6>[ 1.300688@0] NET: Registered protocol family 24<6>[ 1.305324@0] usbcore: registered new interface driver asix<6>[ 1.310891@0] usbcore: registered new interface driver ax88179_178a<6>[ 1.317093@0] usbcore: registered new interface driver cdc_ether<6>[ 1.323076@0] usbcore: registered new interface driver dm9601<6>[ 1.328783@0] usbcore: registered new interface driver net1080<6>[ 1.334604@0] usbcore: registered new interface driver cdc_subset<6>[ 1.340666@0] usbcore: registered new interface driver zaurus<6>[ 1.346397@0] usbcore: registered new interface driver cdc_ncm<6>[ 1.352203@0] usbcore: registered new interface driver qf9700<6>[ 1.357913@0] usbcore: registered new interface driver sr9600<6>[ 1.363766@0] usbcore: registered new interface driver cdc_acm<6>[ 1.369414@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters<6>[ 1.377607@0] usbcore: registered new interface driver usb-storage<6>[ 1.383801@0] usbcore: registered new interface driver usbserial<6>[ 1.389734@0] usbcore: registered new interface driver option<6>[ 1.395436@0] usbserial: USB Serial support registered for GSM modem (1-port)<6>[ 1.402727@0] mousedev: PS/2 mouse device common for all mice<6>[ 1.408442@0] usbcore: registered new interface driver xpad<6>[ 1.413840@0] usbcore: registered new interface driver usb_acecad<6>[ 1.419900@0] usbcore: registered new interface driver aiptek<6>[ 1.425607@0] usbcore: registered new interface driver gtco<6>[ 1.431175@0] usbcore: registered new interface driver hanwang<6>[ 1.436971@0] usbcore: registered new interface driver kbtab<4>[ 1.440029@1] hdmitx: system: gate/pwr cmd: 5<4>[ 1.440030@1] hdmitx: edid: edid ready<4>[ 1.440035@1] hdmitx: edid: check sum valid<4>[ 1.440036@1] hdmitx: edid: check sum valid<4>[ 1.440039@1] hdmitx: edid: blk0 raw data<4>[ 1.440062@1] 00ffffffffffff0009d1c2762e1d000018100103a02b1b78bacfb5a355499925<4>[ 1.440084@1] 105054a56f80454f614f81408180818f714fb300010121399030621a274068b0<4>[ 1.440106@1] 3600b10f1100001cd50980a0205e631010605208782d1100001a000000fd0038<4>[ 1.440127@1] 4c1e5411000a202020202020000000fc0042656e51204650323032570a200152<4>[ 1.440128@1] <4>[ 1.440129@1] hdmitx: edid: blk1 raw data<4>[ 1.440150@1] 02031b71230907078301000067030c001000802143011084e2000f011d007251<4>[ 1.440171@1] d01e206e28550081490000001e00000010000000000000000000000000000000<4>[ 1.440192@1] 0000100000000000000000000000000000000000100000000000000000000000<4>[ 1.440213@1] 00000000000010000000000000000000000000000000000000000000000000bf<4>[ 1.440214@1] <4>[ 1.440246@1] hdmitx: edid: find IEEEOUT<4>[ 1.440269@1] hdmitx: video: get current mode: 1080p<4>[ 1.440277@1] is_similar_hdmi_vic[326] vic_old=16,mode_new=15<4>[ 1.440279@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16<4>[ 1.440282@1] hdmitx: audio: audio channel num is 0<4>[ 1.440287@1] hdmitx: audio: SPDIF<4>[ 1.440298@1] hdmitx: audio: current VIC: 16<4>[ 1.440299@1] hdmitx: audio: audio sample rate: 0<4>[ 1.440300@1] hdmitx: audio: set audio N para<4>[ 1.440307@1] hdmitx: audio: PCM out to HDMI<4>[ 1.460857@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL<4>[ 1.460859@1] hdmitx: audio: i2s_to_spdif_flag:1 <4>[ 1.460860@1] hdmitx: audio: Enable audio spdif to HDMI<4>[ 1.460914@1] hdmitx: cec: CEC not ready<4>[ 1.460917@1] hdmi detect: plug.<6>[ 1.597524@0] usbcore: registered new interface driver wacom<6>[ 1.603195@0] i2c /dev entries driver<6>[ 1.607075@0] usbcore: registered new interface driver uvcvideo<6>[ 1.612658@0] USB Video Class driver (1.1.1)<6>[ 1.617066@0] device-mapper: uevent: version 1.0.3<6>[ 1.621838@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]<6>[ 1.630405@0] Bluetooth: HCI UART driver ver 2.2<6>[ 1.634837@0] Bluetooth: HCI H4 protocol initialized<6>[ 1.639980@0] hidraw: raw HID events driver (C) Jiri Kosina<6>[ 1.646698@0] usbcore: registered new interface driver usbhid<6>[ 1.651058@0] usbhid: USB HID core driver<6>[ 1.655337@0] zram: Created 1 device(s) ...<6>[ 1.659458@0] ashmem: initialized<6>[ 1.662606@0] logger: created 256K log 'log_main'<6>[ 1.667274@0] logger: created 256K log 'log_events'<6>[ 1.672135@0] logger: created 256K log 'log_radio'<6>[ 1.676884@0] logger: created 256K log 'log_system'<4>[ 1.681801@0] vout_init_module<4>[ 1.684724@0] start init vout module<4>[ 1.688254@0] create vout attribute ok<4>[ 1.692393@0] ge2d_init<4>[ 1.694477@0] ge2d_dev major:243<4>[ 1.697788@0] ge2d start monitor<4>[ 1.700947@0] osd_init<4>[ 1.700954@1] ge2d workqueue monitor start<4>[ 1.707330@0] osd_probe, vinfo:c084ccc0<4>[ 1.711301@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K<4>[ 1.719270@0] osd_probe, mydef_var:c0c36bf0, vinfo:c084ccc0<4>[ 1.724822@0] init fbdev bpp is :32<4>[ 1.728279@0] ---------------clear framebuffer0 memory<4>[ 1.746556@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0400000, size=1024K<4>[ 1.749001@0] osd_probe, mydef_var:c0c36bf0, vinfo:c084ccc0<4>[ 1.754556@0] don't find to display_size_default from mesonfb-dts<4>[ 1.760623@0] init fbdev bpp is :16<4>[ 1.779811@0] osd probe ok<4>[ 1.779906@0] osd_ext_init<4>[ 1.780122@0] vout2_init_module enter<4>[ 1.783236@0] start init vout2 module<4>[ 1.786872@0] create vout2 attribute ok<6>[ 1.790810@0] enter aml_sysled_init<6>[ 1.794580@0] amlvideo-000: V4L2 device registered as video10<6>[ 1.800092@0] amlvideo2: V4L2 device registered as video11<6>[ 1.805556@0] ionvideo-000: V4L2 device registered as video13<6>[ 1.811134@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.<7>[ 1.819533@0] DI: di_init<7>[ 1.819558@0] DI: di_probe<4>[ 1.819816@0] aml_wdt_driver_init,301<6>[ 1.823170@0] ** disable watchdog<6>[ 1.826587@0] keys===========================================<4>[ 1.832219@0] keys_devno=f000000<6>[ 1.835474@0] securitykey: device aml_keys created<4>[ 1.840192@0] amlkeys=0<6>[ 1.842609@0] platform_driver_register--aml_keys_driver--------------------<4>[ 1.849755@0] set uart_ao pinmux use pinctrl subsystem<4>[ 1.854636@0] P_AO_RTI_PIN_MUX_REG:5860<5>[ 1.858460@0] start uart_ao_ttyS0:(irq = 122)<5>[ 1.862809@0] register uart_ao ok<4>[ 1.866226@0] set uart_a pinmux use pinctrl subsystem<4>[ 1.871133@0] P_AO_RTI_PIN_MUX_REG:5860<5>[ 1.874929@0] start uart_a_ttyS1:(irq = 58)<5>[ 1.879079@0] register uart_a ok<5>[ 1.882445@0] start uart_d_ttyS4:(irq = 126)<5>[ 1.886534@0] register uart_d ok<6>[ 1.889845@0] dwc_otg: version 3.10a 12-MAY-2014<7>[ 1.894354@0] dwc_otg lm-root: dwc_otg_driver_probe(ed773400)<4>[ 1.894362@0] dwc_otg_driver_probe NOT match<7>[ 1.898601@0] dwc_otg lm1: dwc_otg_driver_probe(ed773600)<6>[ 1.898615@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000<5>[ 1.907201@0] USB (1) use clock source: XTAL input<7>[ 1.912956@0] dwc_otg lm1: base=0xfe080000<7>[ 1.912963@0] dwc_otg lm1: dwc_otg_device=0xed973e40<4>[ 1.933014@0] Core Release: 3.10a<4>[ 1.933046@0] Setting default values for core params<4>[ 1.935638@0] curmode: 1, host_only: 1<7>[ 1.939368@0] dwc_otg lm1: DMA config: BURST_DEFAULT<4>[ 1.959470@0] Using Buffer DMA mode<4>[ 1.959497@0] OTG VER PARAM: 1, OTG VER FLAG: 1<4>[ 1.961848@0] Working on port type = HOST<6>[ 1.966547@0] dwc_otg lm1: DWC OTG Controller<6>[ 1.970197@0] dwc_otg lm1: new USB bus registered, assigned bus number 1<6>[ 1.976841@0] dwc_otg lm1: irq 63, io mem 0x00000000<4>[ 1.981794@0] -------hcd->flags.d32 = 0<4>[ 1.985596@0] Init: Port Power? op_state=1<4>[ 1.989652@0] Init1: Power Port (0)<6>[ 1.993239@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002<6>[ 2.000087@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1<6>[ 2.007425@0] usb usb1: Product: DWC OTG Controller<6>[ 2.012300@0] usb usb1: Manufacturer: Linux 3.10.33 dwc_otg_hcd<6>[ 2.018176@0] usb usb1: SerialNumber: lm1<6>[ 2.022465@0] hub 1-0:1.0: USB hub found<6>[ 2.026067@0] hub 1-0:1.0: 1 port detected<7>[ 2.030313@0] dwc_otg lm0: dwc_otg_driver_probe(ed773800)<6>[ 2.030340@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000<5>[ 2.038721@0] USB (0) use clock source: XTAL input<7>[ 2.044513@0] dwc_otg lm0: base=0xfe040000<7>[ 2.044520@0] dwc_otg lm0: dwc_otg_device=0xed978740<4>[ 2.064561@0] Core Release: 3.10a<4>[ 2.064587@0] Setting default values for core params<4>[ 2.067181@0] curmode: 1, host_only: 0<7>[ 2.110906@0] dwc_otg lm0: DMA config: BURST_DEFAULT<4>[ 2.131015@0] Using Buffer DMA mode<4>[ 2.131041@0] OTG VER PARAM: 1, OTG VER FLAG: 1<4>[ 2.133372@0] Working on port type = OTG<4>[ 2.137272@0] Current port type: SLAVE<6>[ 2.141146@0] dwc_otg lm0: DWC OTG Controller<6>[ 2.145347@0] dwc_otg lm0: new USB bus registered, assigned bus number 2<6>[ 2.152054@0] dwc_otg lm0: irq 62, io mem 0x00000000<6>[ 2.156981@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002<6>[ 2.163920@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1<6>[ 2.171276@0] usb usb2: Product: DWC OTG Controller<6>[ 2.176108@0] usb usb2: Manufacturer: Linux 3.10.33 dwc_otg_hcd<6>[ 2.182026@0] usb usb2: SerialNumber: lm0<6>[ 2.186242@0] hub 2-0:1.0: USB hub found<6>[ 2.189932@0] hub 2-0:1.0: 1 port detected<4>[ 2.194076@0] Dedicated Tx FIFOs mode<4>[ 2.197840@0] using timer detect id change, ed96d800<4>[ 2.202673@0] boot_device_flag : 0<4>[ 2.205926@0] ===========================================amlnf_init:643,nand device tree ok,dev-name:nand<4>[ 2.215468@0] Nand PHY driver Version: 2.01.001.0006 (c) 2013 Amlogic Inc.<4>[ 2.222349@0] amlnf_phy_init : amlnf init flag 0<4>[ 2.226946@2] HOST mode<4>[ 2.226998@0] ######STS IRQ mode for nand driver<4>[ 2.227054@0] NAND device id: 2c 64 44 4b a9 0 0 0<4>[ 2.227058@0] detect NAND device: B revision NAND 8GiB MT29F64G08CBABA<4>[ 2.229766@1] Indeed it is in host mode hprt0 = 00021501<4>[ 2.245477@0] status:0<4>[ 2.245483@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gfa4a182-dirty #1<4>[ 2.245505@0] [<c00148e8>] (unwind_backtrace+0x0/0xf4) from [<c0011984>] (show_stack+0x10/0x14)<4>[ 2.245516@0] [<c0011984>] (show_stack+0x10/0x14) from [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0)<4>[ 2.245524@0] [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0) from [<c04bd4f8>] (nand_reset+0xd0/0x1c4)<4>[ 2.245530@0] [<c04bd4f8>] (nand_reset+0xd0/0x1c4) from [<c04bd860>] (read_id+0x68/0x144)<4>[ 2.245536@0] [<c04bd860>] (read_id+0x68/0x144) from [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c)<4>[ 2.245542@0] [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c) from [<c04c5a0c>] (amlnf_phy_init+0x180/0x204)<4>[ 2.245552@0] [<c04c5a0c>] (amlnf_phy_init+0x180/0x204) from [<c04b729c>] (amlnf_init+0xd4/0x12c)<4>[ 2.245565@0] [<c04b729c>] (amlnf_init+0xd4/0x12c) from [<c02f6cf4>] (driver_probe_device+0xd0/0x214)<4>[ 2.245574@0] [<c02f6cf4>] (driver_probe_device+0xd0/0x214) from [<c02f6ee4>] (__driver_attach+0x68/0x8c)<4>[ 2.245582@0] [<c02f6ee4>] (__driver_attach+0x68/0x8c) from [<c02f5298>] (bus_for_each_dev+0x4c/0x98)<4>[ 2.245589@0] [<c02f5298>] (bus_for_each_dev+0x4c/0x98) from [<c02f640c>] (bus_add_driver+0xd0/0x258)<4>[ 2.245596@0] [<c02f640c>] (bus_add_driver+0xd0/0x258) from [<c02f74f4>] (driver_register+0xa8/0x13c)<4>[ 2.245604@0] [<c02f74f4>] (driver_register+0xa8/0x13c) from [<c0008564>] (do_one_initcall+0xa8/0x150)<4>[ 2.245616@0] [<c0008564>] (do_one_initcall+0xa8/0x150) from [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0)<4>[ 2.245625@0] [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0) from [<c07dee30>] (kernel_init+0x8/0x158)<4>[ 2.245635@0] [<c07dee30>] (kernel_init+0x8/0x158) from [<c000dcd8>] (ret_from_fork+0x14/0x3c)<4>[ 2.264759@0] status:0<4>[ 2.264763@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gfa4a182-dirty #1<4>[ 2.264773@0] [<c00148e8>] (unwind_backtrace+0x0/0xf4) from [<c0011984>] (show_stack+0x10/0x14)<4>[ 2.264780@0] [<c0011984>] (show_stack+0x10/0x14) from [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0)<4>[ 2.264787@0] [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0) from [<c04bd4f8>] (nand_reset+0xd0/0x1c4)<4>[ 2.264792@0] [<c04bd4f8>] (nand_reset+0xd0/0x1c4) from [<c04bd860>] (read_id+0x68/0x144)<4>[ 2.264798@0] [<c04bd860>] (read_id+0x68/0x144) from [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c)<4>[ 2.264804@0] [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c) from [<c04c5a0c>] (amlnf_phy_init+0x180/0x204)<4>[ 2.264811@0] [<c04c5a0c>] (amlnf_phy_init+0x180/0x204) from [<c04b729c>] (amlnf_init+0xd4/0x12c)<4>[ 2.264820@0] [<c04b729c>] (amlnf_init+0xd4/0x12c) from [<c02f6cf4>] (driver_probe_device+0xd0/0x214)<4>[ 2.264827@0] [<c02f6cf4>] (driver_probe_device+0xd0/0x214) from [<c02f6ee4>] (__driver_attach+0x68/0x8c)<4>[ 2.264834@0] [<c02f6ee4>] (__driver_attach+0x68/0x8c) from [<c02f5298>] (bus_for_each_dev+0x4c/0x98)<4>[ 2.264841@0] [<c02f5298>] (bus_for_each_dev+0x4c/0x98) from [<c02f640c>] (bus_add_driver+0xd0/0x258)<4>[ 2.264848@0] [<c02f640c>] (bus_add_driver+0xd0/0x258) from [<c02f74f4>] (driver_register+0xa8/0x13c)<4>[ 2.264854@0] [<c02f74f4>] (driver_register+0xa8/0x13c) from [<c0008564>] (do_one_initcall+0xa8/0x150)<4>[ 2.264862@0] [<c0008564>] (do_one_initcall+0xa8/0x150) from [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0)<4>[ 2.264869@0] [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0) from [<c07dee30>] (kernel_init+0x8/0x158)<4>[ 2.264876@0] [<c07dee30>] (kernel_init+0x8/0x158) from [<c000dcd8>] (ret_from_fork+0x14/0x3c)<4>[ 2.283994@0] status:0<4>[ 2.283998@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gfa4a182-dirty #1<4>[ 2.284007@0] [<c00148e8>] (unwind_backtrace+0x0/0xf4) from [<c0011984>] (show_stack+0x10/0x14)<4>[ 2.284014@0] [<c0011984>] (show_stack+0x10/0x14) from [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0)<4>[ 2.284020@0] [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0) from [<c04bd4f8>] (nand_reset+0xd0/0x1c4)<4>[ 2.284026@0] [<c04bd4f8>] (nand_reset+0xd0/0x1c4) from [<c04bd860>] (read_id+0x68/0x144)<4>[ 2.284032@0] [<c04bd860>] (read_id+0x68/0x144) from [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c)<4>[ 2.284038@0] [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c) from [<c04c5a0c>] (amlnf_phy_init+0x180/0x204)<4>[ 2.284044@0] [<c04c5a0c>] (amlnf_phy_init+0x180/0x204) from [<c04b729c>] (amlnf_init+0xd4/0x12c)<4>[ 2.284052@0] [<c04b729c>] (amlnf_init+0xd4/0x12c) from [<c02f6cf4>] (driver_probe_device+0xd0/0x214)<4>[ 2.284059@0] [<c02f6cf4>] (driver_probe_device+0xd0/0x214) from [<c02f6ee4>] (__driver_attach+0x68/0x8c)<4>[ 2.284066@0] [<c02f6ee4>] (__driver_attach+0x68/0x8c) from [<c02f5298>] (bus_for_each_dev+0x4c/0x98)<4>[ 2.284073@0] [<c02f5298>] (bus_for_each_dev+0x4c/0x98) from [<c02f640c>] (bus_add_driver+0xd0/0x258)<4>[ 2.284080@0] [<c02f640c>] (bus_add_driver+0xd0/0x258) from [<c02f74f4>] (driver_register+0xa8/0x13c)<4>[ 2.284087@0] [<c02f74f4>] (driver_register+0xa8/0x13c) from [<c0008564>] (do_one_initcall+0xa8/0x150)<4>[ 2.284094@0] [<c0008564>] (do_one_initcall+0xa8/0x150) from [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0)<4>[ 2.284101@0] [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0) from [<c07dee30>] (kernel_init+0x8/0x158)<4>[ 2.284108@0] [<c07dee30>] (kernel_init+0x8/0x158) from [<c000dcd8>] (ret_from_fork+0x14/0x3c)<6>[ 2.409741@1] usb 1-1: new high-speed USB device number 2 using dwc_otg<4>[ 2.409958@0] Indeed it is in host mode hprt0 = 00001101<6>[ 2.610914@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608<6>[ 2.610919@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0<6>[ 2.610922@0] usb 1-1: Product: USB2.0 Hub<6>[ 2.611366@0] hub 1-1:1.0: USB hub found<6>[ 2.611636@0] hub 1-1:1.0: 4 ports detected<4>[ 2.755605@0] AML_NAND_NEW_OOB : new oob<4>[ 2.759309@0] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15<4>[ 2.767226@0] boot_device_flag = 0<4>[ 2.771582@0] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 0<4>[ 2.779728@2] -------hcd->flags.d32 = 0<4>[ 2.782730@2] Init: Port Power? op_state=1<4>[ 2.783223@0] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0<4>[ 2.783556@0] nand shipped bbt at block 0<4>[ 2.799103@2] Init1: Power Port (0)<4>[ 2.800321@0] NAND CKECK : arg phyp: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 1<4>[ 2.810893@2] [RN5T618]rn5t618_otg_change, driver is not ready, do it later<4>[ 2.817816@2] set usb port power on (board gpio 15)!<4>[ 2.823585@0] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 19<4>[ 2.831571@0] i=0,register --- nand_key<4>[ 2.835010@0] amlnand_phydev_init,1177,phydev->offset=6000000,phydev->size=24800000<4>[ 2.842638@0] amlnand_phydev_init,1177,phydev->offset=2a800000,phydev->size=50800000<4>[ 2.850352@0] amlnand_phydev_init,1177,phydev->offset=7b000000,phydev->size=185000000<4>[ 2.858130@0] nfcache : offset: 0x000006000000 -0x000024800000 : partitons 1 : single_chip multi_plane<4>[ 2.867687@0] nfcode : offset: 0x00002a800000 -0x000050800000 : partitons 5 : single_chip multi_plane<4>[ 2.877219@0] nfdata : offset: 0x00007b000000 -0x000185000000 : partitons 1 : single_chip multi_plane<4>[ 2.886757@0] amlnand_add_nftl:<5>[ 2.889887@0] Creating 1 ntd partitions<4>[ 2.893681@0] block_num 146 <6>[ 2.896546@0] usb 1-1.1: new high-speed USB device number 3 using dwc_otg<4>[ 2.905946@2] ------init_ntd<5>[ 2.906350@2] ntd: Giving out device 0 to nfcache<5>[ 2.910839@2] Creating 5 ntd partitions<4>[ 2.914644@2] block_num 322 <5>[ 2.923440@2] ntd: Giving out device 1 to nfcode<5>[ 2.923472@2] Creating 1 ntd partitions<4>[ 2.926231@2] block_num 1556 <5>[ 2.957192@2] ntd: Giving out device 2 to nfdata<4>[ 2.957509@2] ethernet_driver probe!<4>[ 2.959738@2] Please config phy interface.<4>[ 2.963884@2] Please config savepowermode.<4>[ 2.967958@2] Please config reset_pin_enable.<4>[ 2.972299@2] Please config reset_delay.<4>[ 2.976192@2] Please config reset_pin.<4>[ 2.979927@2] ethernetinit(dbg[c0c3d7e4]=1)<4>[ 2.984105@2] ethernet base addr is fe0c0000<4>[ 2.988329@2] write mac add to:ed9a27c8: 00 11 6d 09 09 67 |.m..g|<6>[ 2.996949@2] libphy: AMLMAC MII Bus: probed<6>[ 2.998819@2] eth0: PHY ID 02430c54 at 0 IRQ -1 (0:00) active<4>[ 3.004985@2] Amlogic A/V streaming port init<6>[ 3.005300@0] usb 1-1.1: New USB device found, idVendor=13fe, idProduct=3600<6>[ 3.005305@0] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3<6>[ 3.005308@0] usb 1-1.1: Product: silicon-power<6>[ 3.005312@0] usb 1-1.1: Manufacturer: <6>[ 3.005315@0] usb 1-1.1: SerialNumber: 11030106E6B31000106200C1<6>[ 3.005655@0] usb-storage 1-1.1:1.0: USB Mass Storage device detected<6>[ 3.044799@0] usb-storage 1-1.1:1.0: Quirks match for vid 13fe pid 3600: 4000<4>[ 3.045438@2] buffersize=262144,0,start=0<4>[ 3.045446@2] Subtitle stbuf alloced at 0xece80000, size = 262144<4>[ 3.045448@2] changed the (2) buffer size from 0 to 262144<4>[ 3.045593@2] init vdec memsource 9a00000->199fffff<4>[ 3.045671@2] [tsync_pcr_init]init success. <4>[ 3.045673@2] amvideocap_init_module<4>[ 3.045702@2] amvideocap_probe,amvideocap<4>[ 3.045705@2] amvideocap_dev_register buf:1d200000,size:800000.<4>[ 3.045886@2] regist mpeg12 codec profile<4>[ 3.045921@2] regist mpeg4 codec profile<4>[ 3.045923@2] amvdec_vc1 module init<4>[ 3.045956@2] regist vc1 codec profile<4>[ 3.045957@2] amvdec_h264 module init<4>[ 3.046013@2] regist h264 codec profile<4>[ 3.046015@2] amvdec_h264mvc module init<4>[ 3.046050@2] regist hmvc codec profile<4>[ 3.046051@2] amvdec_h264_4k2k module init<4>[ 3.046090@2] regist h264_4k2k codec profile<4>[ 3.046091@2] amvdec_h265 module init<4>[ 3.046125@2] regist hevc_unsupport codec profile<4>[ 3.046164@2] regist mjpeg codec profile<4>[ 3.046166@2] amvdec_real module init<4>[ 3.046201@2] amvdec_avs module init<4>[ 3.046290@2] amvenc_avc memory resource undefined.<4>[ 3.046291@2] encode_wq_init.<4>[ 3.046294@2] encode start monitor.<4>[ 3.046353@3] encode workqueue monitor start.<4>[ 3.046495@2] jpegenc module init<4>[ 3.046668@2] picdec buffer size is 4000000<4>[ 3.046777@2] alloc_keep_buffer keep_y_addr eca00000<4>[ 3.046790@2] alloc_keep_buffer keep_u_addr ecf00000<4>[ 3.046798@2] alloc_keep_buffer keep_v_addr ed000000<4>[ 3.046800@2] yaddr=eca00000,u_addr=ecf00000,v_addr=ed000000<4>[ 3.046989@2] create_ge2d_work_queue video task ok <4>[ 3.046992@2] video2_init enter<4>[ 3.047264@2] video2_drv_probe exit<4>[ 3.047525@2] <4>[ 3.047525@2] <4>[ 3.047525@2] VECM init <4>[ 3.047525@2] <6>[ 3.047677@2] efuse===========================================<6>[ 3.047773@2] efuse: device efuse created<6>[ 3.047815@2] efuse--------------------------------------------<6>[ 3.047817@2] SARADC Driver init.<4>[ 3.047896@2] __saradc_probe__<4>[ 3.229837@2] saradc calibration: ref_val = 504<4>[ 3.229838@2] saradc calibration: ref_nominal = 512<4>[ 3.229840@2] saradc calibration: coef = 4088<4>[ 3.230017@2] irblaster probe<6>[ 3.230133@2] Remote Driver<4>[ 3.230200@2] Remote platform_data g_remote_base=fe600580<4>[ 3.230223@2] set drvdata completed
<4>[ 3.230229@2] device_create_file completed
<6>[ 3.230538@2] input: aml_keypad as /devices/platform/meson-remote/input/input0<4>[ 3.230700@2] input_register_device completed
<4>[ 3.230740@2] [0xffffff00] = 0x1dd0190<4>[ 3.230742@2] [0xffffff04] = 0xf800ca<4>[ 3.230744@2] [0xffffff08] = 0x82006e<4>[ 3.230745@2] [0xffffff0c] = 0x3c0030<4>[ 3.230747@2] [0xffffff10] = 0x30fa0013<4>[ 3.230748@2] [0xffffff18] = 0x6f19000<4>[ 3.230750@2] [0xffffff1c] = 0xbe40<4>[ 3.230752@2] [0x0] = 0xfa00a0<4>[ 3.230753@2] [0x4] = 0xfa00a0<4>[ 3.230754@2] [0x8] = 0xfa00a0<4>[ 3.230755@2] [0xc] = 0x640030<4>[ 3.230757@2] [0x10] = 0x30fa0013<4>[ 3.230758@2] [0x18] = 0x961b800<4>[ 3.230760@2] [0x1c] = 0x9740<4>[ 3.230761@2] [0x20] = 0x104<4>[ 3.230763@2] [0x24] = 0x0<4>[ 3.230764@2] [0x28] = 0x0<4>[ 3.230766@2] set_remote_mode[69]<4>[ 3.230780@2] remote config major:232
<4>[ 3.230870@2] physical address:0x2d0c8000<6>[ 3.230899@2] ADC Keypad Driver init.<4>[ 3.230979@2] ==touch_ts_init==<4>[ 3.231049@2] ==ft5x0x_ts_init==<4>[ 3.231071@2] ==goodix_ts_init==<4>[ 3.231105@2] i2c-core: driver [gslx680_compatible] using legacy suspend method<4>[ 3.231107@2] i2c-core: driver [gslx680_compatible] using legacy resume method<6>[ 3.231126@2] !!!ntp_ts: ret = 0. <4>[ 3.231128@2] VTL ct36x TouchScreen driver, <[email protected]>.<4>[ 3.231149@2] i2c-core: driver [ct36x] using legacy suspend method<4>[ 3.231150@2] i2c-core: driver [ct36x] using legacy resume method<4>[ 3.231153@2] VTL ct36x TouchScreen driver End.<4>[ 3.231155@2] ==gsl_ts_init==<4>[ 3.231173@2] ret=0<4>[ 3.231224@2] ####################come here #####################<6>[ 3.246675@2] up vfd key(103) registed.<6>[ 3.246677@2] down vfd key(108) registed.<6>[ 3.246679@2] right vfd key(106) registed.<6>[ 3.246681@2] back vfd key(158) registed.<6>[ 3.246683@2] left vfd key(105) registed.<6>[ 3.246685@2] ok vfd key(232) registed.<6>[ 3.246795@2] input: vfd_keypad as /devices/platform/m1-vfd.0/input/input1<4>[ 3.246886@2] vfd config major:231
<4>[ 3.247147@2] i2c-core: driver [mir3da] using legacy suspend method<4>[ 3.247149@2] i2c-core: driver [mir3da] using legacy resume method<4>[ 3.247167@2] i2c-core: driver [lis3dh_acc] using legacy suspend method<4>[ 3.247169@2] i2c-core: driver [lis3dh_acc] using legacy resume method<4>[ 3.247206@2] i2c-core: driver [bma222] using legacy suspend method<4>[ 3.247208@2] i2c-core: driver [bma222] using legacy resume method<4>[ 3.247241@2] i2c-core: driver [dmard06] using legacy suspend method<4>[ 3.247243@2] i2c-core: driver [dmard06] using legacy resume method<6>[ 3.247261@2] lsm303d driver: init<4>[ 3.247293@2] i2c-core: driver [dmard10] using legacy suspend method<4>[ 3.247294@2] i2c-core: driver [dmard10] using legacy resume method<4>[ 3.247318@2] stk8313_init<4>[ 3.247335@2] ======stk831x init ok======<4>[ 3.247337@2] stk831x_init<6>[ 3.247355@2] mxc622x accelerometer driver: init<4>[ 3.247371@2] i2c-core: driver [mxc622x] using legacy suspend method<4>[ 3.247373@2] i2c-core: driver [mxc622x] using legacy resume method<6>[ 3.247376@2] mxc6255xc accelerometer driver: init<4>[ 3.247393@2] i2c-core: driver [mxc6255xc] using legacy suspend method<4>[ 3.247394@2] i2c-core: driver [mxc6255xc] using legacy resume method<4>[ 3.247445@2] cm3217 v.1.0.0.1<4>[ 3.247462@2] i2c-core: driver [elan_epl6814] using legacy suspend method<4>[ 3.247464@2] i2c-core: driver [elan_epl6814] using legacy resume method<4>[ 3.247482@2] i2c-core: driver [LTR501] using legacy suspend method<4>[ 3.247483@2] i2c-core: driver [LTR501] using legacy resume method<6>[ 3.247539@2] GPIO Keypad Driver init.<4>[ 3.247598@2] ==gpio_key_probe==<4>[ 3.247617@2] reg:2620,clearmask=400040,setmask=1<4>[ 3.247620@2] reg:2622,clearmask=ff0000,set pin=3<4>[ 3.247623@2] reg:2623,clearmask=7000000,setmask=7<4>[ 3.247626@2] reg:2620,clearmask=800080,setmask=10001<4>[ 3.247628@2] reg:2622,clearmask=ff000000,set pin=3<4>[ 3.247631@2] reg:2623,clearmask=70000000,setmask=7<6>[ 3.247649@2] power key(116) registed.<6>[ 3.247754@2] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input2<4>[ 3.247838@2] gpio keypad register input device completed.<4>[ 3.247843@2] gpio keypad major:230<4>[ 3.247954@2] spi_nor_init<4>[ 3.248020@2] amlogic_spi_nor_probe:<4>[ 3.248024@2] amlogic_spi->state_name:default<6>[ 3.248088@2] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated<4>[ 3.248136@2] check_storage_device : spi boot_device_flag : 0<4>[ 3.248138@2] spi_nor_probe<6>[ 3.248169@2] spi_nor apollospi:32766: mx25l160 (2048 Kbytes)<5>[ 3.248328@2] Creating 2 MTD partitions on "apollospi:32766":<5>[ 3.248334@2] 0x000000000000-0x000000100000 : "bootloader"<5>[ 3.248880@2] 0x000000100000-0x000000110000 : "ubootenv"<4>[ 3.249311@2] amlogic_spi_nor_probe over<4>[ 3.249413@2] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error<6>[ 3.700251@2] scsi0 : usb-storage 1-1.1:1.0<4>[ 3.700254@0] key 116 up<4>[ 3.701238@0] host->base fe108c20<4>[ 3.701264@0] pdata->caps 7<4>[ 3.701266@0] pdata->caps2 0<4>[ 3.701269@0] get property: port, value:0x00000001<4>[ 3.701272@0] get property: ocr_avail, value:0x00200000<4>[ 3.701274@0] get property: f_min, value:0x000493e0<4>[ 3.701277@0] get property: f_max, value:0x02faf080<4>[ 3.701280@0] get property: max_req_size, value:0x00020000<4>[ 3.701282@0] get property: irq_in, value:0x00000003<4>[ 3.701285@0] get property: irq_out, value:0x00000005<4>[ 3.701290@0] get property: gpio_cd, str:CARD_6<4>[ 3.701294@0] get property: pinname, str:sd<4>[ 3.701297@0] get property: jtag_pin, str:CARD_0<4>[ 3.701299@0] get property: card_type, value:0x00000005<4>[ 3.701302@0] get property: gpio_dat3, str:CARD_4<4>[ 3.739770@1] reg:2620,clearmask=80008,setmask=10001<4>[ 3.739774@1] reg:2621,clearmask=ff000000,set pin=64<4>[ 3.739776@1] reg:2623,clearmask=7000,setmask=7<4>[ 3.739779@1] reg:2620,clearmask=200020,setmask=1<4>[ 3.739781@1] reg:2622,clearmask=ff00,set pin=64<4>[ 3.739783@1] reg:2623,clearmask=700000,setmask=7<4>[ 3.829767@1] pdata->caps 107<4>[ 3.829795@1] pdata->caps2 0<4>[ 3.829960@1] get property: port, value:0x00000000<4>[ 3.836460@1] get property: ocr_avail, value:0x00200000<4>[ 3.849727@2] get property: f_min, value:0x000493e0<4>[ 3.850613@2] get property: f_max, value:0x02faf080<4>[ 3.857114@2] get property: max_req_size, value:0x00020000<4>[ 3.863629@2] get property: pinname, str:sdio<4>[ 3.869423@2] get property: card_type, value:0x00000003<6>[ 3.899975@0] usb 1-1.3: new low-speed USB device number 4 using dwc_otg<4>[ 3.969729@2] [aml_sdio_probe] aml_sdio_probe() success!<4>[ 3.970877@2] host->base fe108e00<4>[ 3.972741@2] pdata->caps 80000547<4>[ 3.976075@2] pdata->caps2 0<4>[ 3.978936@2] get property: port, value:0x00000005<4>[ 3.985460@2] get property: ocr_avail, value:0x00200000<4>[ 3.991954@2] get property: f_min, value:0x000493e0<4>[ 3.998439@2] get property: f_max, value:0x05f5e100<4>[ 4.004966@1] get property: max_req_size, value:0x00020000<6>[ 4.006105@0] usb 1-1.3: New USB device found, idVendor=1997, idProduct=1221<6>[ 4.006110@0] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0<6>[ 4.006114@0] usb 1-1.3: Product: Wireless Air mouse Keyboard<6>[ 4.006117@0] usb 1-1.3: Manufacturer: <4>[ 4.035563@1] get property: pinname, str:emmc<6>[ 4.039913@0] input: Wireless Air mouse Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.0/input/input3<6>[ 4.040105@0] hid-generic 0003:1997:1221.0001: input,hidraw0: USB HID v1.00 Keyboard [ Wireless Air mouse Keyboard] on usb-lm1-1.3/input0<6>[ 4.045077@0] input: Wireless Air mouse Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.1/input/input4<6>[ 4.045324@0] hid-generic 0003:1997:1221.0002: input,hidraw1: USB HID v1.00 Mouse [ Wireless Air mouse Keyboard] on usb-lm1-1.3/input1<4>[ 4.084800@1] get property: card_type, value:0x00000001<4>[ 4.091287@1] get property: gpio_dat3, str:BOOT_3<4>[ 4.097258@1] [is_emmc_exist] host->storage_flag=4, POR_BOOT_VALUE=5<4>[ 4.103591@1] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config!<4>[ 4.169720@1] [aml_sdhc_probe] aml_sdhc_probe() success!<6>[ 4.169830@1] [dsp]DSP start addr 0xc5e00000<6>[ 4.173657@1] [dsp]register dsp to char divece(257)<6>[ 4.178721@1] amlogic audio spdif interface device init!<4>[ 4.183859@1] name=nand_key nand_key<4>[ 4.187708@1] register_aes_algorithm:488,new way<4>[ 4.192395@1] key name:keyexample, key data:1234567890<6>[ 4.197642@1] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0<4>[ 4.203149@1] Indeed it is in host mode hprt0 = 00021501<7>[ 4.212174@2] [AML1216]call aml1216_battery_init, ret = 0<7>[ 4.212218@2] [AML1218]call aml1218_battery_init, ret = 0<7>[ 4.212254@2] [RN5T618]call rn5t618_battery_probe in<7>[ 4.212261@2] [RN5T618]no special flag, clear RTC mem, force using ocv<6>[ 4.212984@2] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input/input5<7>[ 4.216196@2] [RN5T618]use BSP configed battery parameters<3>[ 4.216202@2] [RN5T618] NO BATTERY_PARAMETERS FOUND<4>[ 4.221004@2] [RN5T618]no battery, exit<7>[ 4.230794@2] [RN5T618]call rn5t618_battery_probe exit, ret:0<7>[ 4.230816@2] [RN5T618]call rn5t618_battery_init, ret = 0<6>[ 4.230837@2] vdin_drv_init: major 228<6>[ 4.231009@2] vdin0 mem_start = 0x19a00000, mem_size = 0x1000000<6>[ 4.234937@2] vdin_drv_probe: driver initialized ok<6>[ 4.239891@2] vdin1 mem_start = 0x1aa00000, mem_size = 0x1000000<6>[ 4.245771@2] vdin_drv_probe: driver initialized ok<4>[ 4.250693@2] amvdec_656in module: init.<4>[ 4.254520@2] amvdec_656in_init_module:major 227<4>[ 4.259319@2] amvdec_656in probe ok.<4>[ 4.262871@2] amvdec_csi probe ok.<4>[ 4.266059@2] [viuin..]viuin_init_module viuin module init<4>[ 4.271627@2] [viuin..]viuin_probe probe ok.<6>[ 4.275916@2] [isp..]isp_probe isp probe ok.<4>[ 4.280035@2] [sii9233a_drv_init] Ver: 2013Nov12<6>[ 4.285194@2] amaudio2: device amaudio2 created<4>[ 4.289228@2] Error: Didn't get power valid value --- wifi_power_probe 376<4>[ 4.295968@2] Error: Didn't get suspend_power_off value --- wifi_power_probe 393<4>[ 4.303330@2] wifi_power power_gpio is 6<4>[ 4.307223@2] wifi_power power_gpio2 is 123<4>[ 4.311526@2] amlogic rfkill init<7>[ 4.314715@2] enter bt_probe of_node<4>[ 4.314722@2] not get gpio_en<4>[ 4.317622@2] not get gpio_wake<4>[ 4.349784@2] wifi_request_32k_clk : OFF-->ON for bt_rfkill<4>[ 4.349821@2] clock_32k_pin(122) : (null)<4>[ 4.353708@2] clock_32k_pin(122) : sdio_wifi<6>[ 4.379730@1] usb 2-1: new high-speed USB device number 2 using dwc_otg<4>[ 4.380979@0] Indeed it is in host mode hprt0 = 00001101<6>[ 4.460748@2] aml_aes aml_aes: Aml AES<6>[ 4.461074@2] aml_tdes aml_tdes: Aml TDES<6>[ 4.463110@2] usbcore: registered new interface driver snd-usb-audio<4>[ 4.469398@2] enter rt5616_modinit<4>[ 4.472677@2] dummy_codec_platform_probe<4>[ 4.476565@2] == ES8323 == es8323_modinit() <7>[ 4.481035@2] enter aml_i2s_dai_probe<6>[ 4.481042@2] i2s get no clk src setting in dts, use the default mpll 0<6>[ 4.487296@2] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000<7>[ 4.495297@2] enter aml_pcm_dai_probe<6>[ 4.495336@2] [aml-spdif-dai]enter aml_dai_spdif_init<6>[ 4.500218@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4<4>[ 4.507313@2] audio_set_958_clk, freq=4,<4>[ 4.511229@2] IEC958 16bit<4>[ 4.513903@2] hdmitx: audio: aout notify rate 48000<4>[ 4.518756@2] hdmitx: audio: aout notify size 16<4>[ 4.523357@2] hdmitx: audio: aout notify format CT_PCM<4>[ 4.528466@2] hdmitx: audio: audio channel num is 1<4>[ 4.533328@2] hdmitx: audio: SPDIF<4>[ 4.536707@2] hdmitx: audio: current VIC: 16<4>[ 4.540954@2] hdmitx: audio: audio sample rate: 3<4>[ 4.545627@2] hdmitx: audio: set audio N para<4>[ 4.549973@2] hdmitx: audio: PCM out to HDMI<4>[ 4.554209@2] hdmitx: audio: i2s_to_spdif_flag:1 <4>[ 4.558889@2] hdmitx: audio: Enable audio spdif to HDMI<4>[ 4.564101@2] hdmitx: audio: Audio Type: PCM<4>[ 4.568379@2] hdmitx: audio: set audio param<6>[ 4.572654@2] [aml-spdif-dai]aml_spdif_probe<4>[ 4.576929@2] test codec dummy_codec<4>[ 4.580399@2] using external codec, index = 1<6>[ 4.581422@0] usb 2-1: New USB device found, idVendor=05e3, idProduct=0718<6>[ 4.581427@0] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2<6>[ 4.581430@0] usb 2-1: Product: USB Storage<6>[ 4.581434@0] usb 2-1: SerialNumber: 000000000033<4>[ 4.607718@2] using external dummy codec<6>[ 4.608176@0] usb-storage 2-1:1.0: USB Mass Storage device detected<4>[ 4.618002@2] enter spdif_dit_probe <6>[ 4.621412@2] aml_spdif_unmute <6>[ 4.624551@0] scsi1 : usb-storage 2-1:1.0<4>[ 4.624687@2] codec_name = dummy_codec.0<7>[ 4.624894@1] enter aml_set_bias_level level: 1<7>[ 4.624899@1] enter aml_set_bias_level level: 1<7>[ 4.624906@1] enter aml_set_bias_level level: 1<7>[ 4.624907@1] enter aml_set_bias_level level: 2<7>[ 4.624940@2] enter aml_asoc_init <6>[ 4.624960@2] p_aml_audio->hp_disable=1<4>[ 4.624963@2] falied to get spk event delay time paraments from dts file<6>[ 4.624964@2] spk_event delay_time = 0<4>[ 4.647631@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288<4>[ 4.655895@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536<6>[ 4.664324@2] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok<7>[ 4.672331@1] enter aml_set_bias_level level: 1<7>[ 4.672337@1] enter aml_set_bias_level level: 2<4>[ 4.673617@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288<4>[ 4.681545@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2f460000, size=65536<6>[ 4.689978@2] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok<7>[ 4.697876@1] enter aml_set_bias_level level: 1<7>[ 4.697882@1] enter aml_set_bias_level level: 2<7>[ 4.697938@3] enter aml_set_bias_level level: 1<7>[ 4.697945@3] enter aml_set_bias_level level: 2<7>[ 4.698463@1] enter aml_set_bias_level level: 1<7>[ 4.698469@1] enter aml_set_bias_level level: 2<4>[ 4.698543@2] -----ext_codec=1---<4>[ 4.701161@2] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0<6>[ 4.707230@2] GACT probability NOT on<6>[ 4.710773@2] Mirror/redirect action on<6>[ 4.714573@2] u32 classifier<6>[ 4.717431@2] Actions configured<6>[ 4.721000@2] Netfilter messages via NETLINK v0.30.<6>[ 4.725875@2] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)<6>[ 4.732474@2] ctnetlink v0.93: registering with nfnetlink.<6>[ 4.737594@2] NF_TPROXY: Transparent proxy support initialized, version 4.1.0<6>[ 4.744663@2] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.<6>[ 4.750915@2] xt_time: kernel timezone is -0000<6>[ 4.755214@2] ipip: IPv4 over IPv4 tunneling driver<6>[ 4.760393@2] ip_tables: (C) 2000-2006 Netfilter Core Team<6>[ 4.765566@2] arp_tables: (C) 2002 David S. Miller<6>[ 4.770263@2] TCP: cubic registered<6>[ 4.773689@2] Initializing XFRM netlink socket<6>[ 4.778414@2] NET: Registered protocol family 10<6>[ 4.783232@2] mip6: Mobile IPv6<6>[ 4.785842@2] ip6_tables: (C) 2000-2006 Netfilter Core Team<6>[ 4.791534@2] sit: IPv6 over IPv4 tunneling driver<6>[ 4.796724@2] NET: Registered protocol family 17<6>[ 4.800765@2] NET: Registered protocol family 15<5>[ 4.805381@2] Bridge firewalling registered<6>[ 4.809586@2] Bluetooth: RFCOMM TTY layer initialized<6>[ 4.814545@2] Bluetooth: RFCOMM socket layer initialized<6>[ 4.819845@2] Bluetooth: RFCOMM ver 1.11<6>[ 4.823841@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3<6>[ 4.829166@2] Bluetooth: BNEP filters: protocol multicast<6>[ 4.834561@2] Bluetooth: BNEP socket layer initialized<6>[ 4.839655@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2<6>[ 4.845735@2] Bluetooth: HIDP socket layer initialized<6>[ 4.850861@2] l2tp_core: L2TP core driver, V2.0<6>[ 4.855350@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0<6>[ 4.860295@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)<5>[ 4.866043@2] scsi 0:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS<6>[ 4.874628@3] l2tp_netlink: L2TP netlink interface<6>[ 4.879380@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)<6>[ 4.885472@3] l2tp_debugfs: L2TP debugfs support<6>[ 4.890037@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)<6>[ 4.896643@3] NET: Registered protocol family 35<6>[ 4.901870@3] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4<5>[ 4.909013@3] Registering SWP/SWPB emulation handler<4>[ 4.913963@3] enter meson_pm_init<6>[ 4.917364@3] enter meson_pm_probe!<6>[ 4.920731@3] meson_pm_probe done !<6>[ 4.924674@3] file system registered<6>[ 4.928359@3] android_usb gadget: Mass Storage Function, version: 2009/09/11<6>[ 4.934771@3] android_usb gadget: Number of LUNs=2<6>[ 4.939514@3] lun0: LUN: removable file: (no medium)<6>[ 4.944566@3] lun1: LUN: removable file: (no medium)<6>[ 4.949759@3] android_usb gadget: android_usb ready<6>[ 4.954833@3] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)<6>[ 4.961830@3] ### dt-test ### No testcase data in device tree; not running tests<4>[ 4.969253@3] meson_cpufreq: no voltage_control prop<4>[ 4.974118@3] voltage_control = 0<4>[ 4.978554@3] <<-GTP-INFO->> GTP driver installing...<4>[ 4.982504@3] hdmitx: cec: CEC init<6>[ 4.986053@3] input: cec_input as /devices/virtual/input/input6<4>[ 4.997249@3] hdmitx: cec: CEC task process<4>[ 4.991866@3] hdmitx: cec: hdmitx_device->cec_init_ready:0x1<6>[ 5.001436@3] ALSA device list:<6>[ 5.004697@3] #0: AML-M8AUDIO<7>[ 5.007889@3] config uart_ao_ttyS0:: Character length 8bits/char<6>[ 5.019719@3] Changing uart_ao_ttyS0: baud from 0 to 115200<5>[ 5.399957@1] sd 0:0:0:0: [sda] 3919872 512-byte logical blocks: (2.00 GB/1.86 GiB)<5>[ 5.403071@1] sd 0:0:0:0: [sda] Write Protect is off<7>[ 5.406910@1] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00<3>[ 5.408072@1] sd 0:0:0:0: [sda] No Caching mode page found<3>[ 5.412379@1] sd 0:0:0:0: [sda] Assuming drive cache: write through<3>[ 5.422950@1] sd 0:0:0:0: [sda] No Caching mode page found<3>[ 5.424072@1] sd 0:0:0:0: [sda] Assuming drive cache: write through<6>[ 5.456111@1] sda: sda1<3>[ 5.459719@1] sd 0:0:0:0: [sda] No Caching mode page found<3>[ 5.459751@1] sd 0:0:0:0: [sda] Assuming drive cache: write through<5>[ 5.465805@1] sd 0:0:0:0: [sda] Attached SCSI removable disk<6>[ 5.471588@3] Freeing unused kernel memory: 380K (c0b84000 - c0be3000)<11>[ 5.492432@0] init: aml-firstboot-init insert aml-firstboot-init<14>[ 5.493339@0] init: command 'loglevel 7' action=early-init status=0 (init.amlogic.board.rc:4)<4>[ 5.504275@0] aml_nftl_dev: module license 'Proprietary' taints kernel.<4>[ 5.507892@0] Disabling lock debugging due to kernel taint<4>[ 5.514239@0] boot_device_flag : 0<4>[ 5.516729@0] register_ntd_blktrans start<4>[ 5.520772@0] ntd device 250!<4>[ 5.523673@0] ntd->name: nfcache<4>[ 5.526872@0] adjust_block_num : 4,reserved_block_ratio 10<4>[ 5.532398@0] nftl version 150330d<4>[ 5.535722@0] nftl build Mar 30 2015_19:39:32<4>[ 5.540119@0] nftl part attr 0<4>[ 5.545283@0] nftl start:146,17, init flag 0<4>[ 5.547531@0] first<4>[ 5.598574@0] average_erase_count:0<4>[ 5.598603@0] second 12,129<4>[ 5.599200@0] part->max_discard_block = 4<4>[ 5.609962@0] current_block1:132<4>[ 5.622686@0] all discard block full!!<4>[ 5.622720@0] free block cnt = 138<4>[ 5.624178@0] new current block is 134<4>[ 5.778037@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!<4>[ 6.189624@0] recover_current_block_mapping : fill the current block, from page 255<4>[ 6.191656@0] total discard page count is 0<4>[ 6.195798@0] create_part_list:1238,current_used_discard_block=133,current_discard_block_used_count=25<4>[ 6.205522@0] unmappig_pages=31982,discarded_pages=0,mapping_pages=1042<4>[ 6.211693@0] nftl ok!<4>[ 6.214447@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 6.219065@0] aml_nftl_add_ntd ok<4>[ 6.221926@0] ntd device 250!<4>[ 6.224842@0] ntd->name: nfcode<4>[ 6.227964@0] adjust_block_num : 4,reserved_block_ratio 10<4>[ 6.233463@0] nftl version 150330d<4>[ 6.236801@0] nftl build Mar 30 2015_19:39:32<4>[ 6.241184@0] nftl part attr 0<4>[ 6.242763@2] [RN5T618]battery vol change: 0->0 <4>[ 6.253611@0] nftl start:322,33, init flag 0<4>[ 6.253933@0] first<4>[ 6.356103@0] average_erase_count:0<4>[ 6.356126@0] second 264,289<4>[ 6.356814@0] part->max_discard_block = 4<4>[ 6.510947@0] current_block1:56<4>[ 6.519684@0] all discard block full!!<4>[ 6.519786@0] free block cnt = 64<4>[ 6.521091@0] new current block is 58<4>[ 6.672403@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!<5>[ 7.025663@0] scsi 1:0:0:0: Direct-Access USB TO I DE/SATA Device 0016 PQ: 0 ANSI: 4<4>[ 7.030077@1] sd 1:0:0:0: [sdb] Test WP failed, assume Write Enabled<3>[ 7.035127@1] sd 1:0:0:0: [sdb] Asking for cache data failed<3>[ 7.040259@1] sd 1:0:0:0: [sdb] Assuming drive cache: write through<4>[ 7.048738@1] sd 1:0:0:0: [sdb] Test WP failed, assume Write Enabled<3>[ 7.053352@1] sd 1:0:0:0: [sdb] Asking for cache data failed<3>[ 7.058446@1] sd 1:0:0:0: [sdb] Assuming drive cache: write through<5>[ 7.064695@1] sd 1:0:0:0: [sdb] Attached SCSI disk<4>[ 7.087696@0] recover_current_block_mapping : fill the current block, from page 255<4>[ 7.089742@0] total discard page count is 0<4>[ 7.093872@0] create_part_list:1238,current_used_discard_block=57,current_discard_block_used_count=282<4>[ 7.104062@0] unmappig_pages=9933,discarded_pages=0,mapping_pages=64051<4>[ 7.109774@0] nftl ok!<4>[ 7.112676@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.117265@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.121796@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.126330@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.130999@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.135456@0] aml_nftl_add_ntd ok<4>[ 7.138342@0] ntd device 250!<4>[ 7.141316@0] ntd->name: nfdata<4>[ 7.144410@0] adjust_block_num : 4,reserved_block_ratio 10<4>[ 7.149898@0] nftl version 150330d<4>[ 7.153260@0] nftl build Mar 30 2015_19:39:32<4>[ 7.157685@0] nftl part attr 0<4>[ 7.183851@0] nftl start:1556,146, init flag 0<4>[ 7.185127@0] first<4>[ 7.684806@0] found discard block:1554<4>[ 7.685134@0] average_erase_count:0<4>[ 7.686404@0] second 864,1410<4>[ 7.689336@0] part->max_discard_block = 4<4>[ 8.181812@0] current_block1:692<4>[ 8.274256@0] currnet_discard_block1:1554<4>[ 8.280987@0] reach the last discard page:10<4>[ 8.282355@0] free block cnt = 823<4>[ 8.282999@0] new current block is 691<4>[ 8.558451@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!<4>[ 8.854394@0] recover_current_block_mapping : fill the current block, from page 255<4>[ 8.856411@0] total discard page count is 10<4>[ 8.860678@0] create_part_list:1238,current_used_discard_block=1554,current_discard_block_used_count=2<4>[ 8.874945@0] unmappig_pages=271798,discarded_pages=3428,mapping_pages=85734<4>[ 8.876955@0] nftl ok!<4>[ 8.880052@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 8.884448@0] aml_nftl_add_ntd ok<4>[ 8.887194@0] init_aml_nftl end<14>[ 8.890588@0] init: command 'insmod /boot/aml_nftl_dev.ko' action=early-init status=0 (init.amlogic.board.rc:9)<4>[ 8.905504@0] gpu cooling register okay with err=0<4>[ 8.905669@0] gpu core cooling register okay with err=0<4>[ 8.910537@0] Mali: Mali device driver loaded<14>[ 8.914894@0] init: command 'insmod /boot/mali.ko mali_debug_level=2 mali_shared_mem_size=0x40000000' action=early-init status=0 (init.amlogic.board.rc:10)<14>[ 8.928576@0] init: processing action 0xb646c970 (wait_for_coldboot_done)<14>[ 8.935348@0] init: wait for /dev/.coldboot_done<14>[ 8.939938@0] init: command 'wait_for_coldboot_done' action=wait_for_coldboot_done status=0 ((null):0)<14>[ 8.949181@0] init: processing action 0xb646c9a0 (mix_hwrng_into_linux_rng)<14>[ 8.956237@0] init: Mixed 512 bytes from /dev/hw_random into /dev/urandominit: command 'mix_hwrng_into_linux_rng' action=mix_hwrng_into_linux_rng status=0 ((null):0)<14>[ 8.970875@0] init: processing action 0xb646c9d0 (keychord_init)<14>[ 8.976824@0] init: command 'keychord_init' action=keychord_init status=0 ((null):0)<14>[ 8.984577@0] init: processing action 0xb646ca00 (console_init)<7>[ 8.990504@0] config uart_ao_ttyS0:: Character length 8bits/char<14>[ 8.990555@0] init: command 'console_init' action=console_init status=0 ((null):0)<14>[ 8.992495@0] init: processing action 0xb64460a0 (init)<14>[ 8.997703@0] init: command 'sysclktz 0' action=init status=0 (/init.rc:33)<11>[ 9.007773@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'<11>[ 9.012809@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'<11>[ 9.022695@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'<11>[ 9.030832@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'<11>[ 9.040702@0] init: enter do_confirm_formated /dev/block/data, /data<11>[ 9.047019@0] init: do_confirm_formated ext4 try mount<4>[ 9.052207@0] aml_nftl_open ok!<4>[ 9.055966@0] force enable DISCARD here for ext4 fs<7>[ 9.787013@0] EXT4-fs (data): ext4_orphan_cleanup: deleting unreferenced inode 40347<7>[ 9.787154@0] EXT4-fs (data): ext4_orphan_cleanup: deleting unreferenced inode 40242<6>[ 9.787220@0] EXT4-fs (data): 2 orphan inodes deleted<6>[ 9.787250@0] EXT4-fs (data): recovery complete<4>[ 9.832620@3] checked enable EXT4 DISCARD here<6>[ 9.832651@3] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: noauto_da_alloc<11>[ 9.846292@3] init: enter do_confirm_formated /dev/block/cache, /cache<11>[ 9.847187@3] init: do_confirm_formated ext4 try mount<4>[ 9.852381@3] aml_nftl_open ok!<4>[ 9.856114@3] force enable DISCARD here for ext4 fs<6>[ 9.882330@3] EXT4-fs (cache): recovery complete<4>[ 9.885312@3] checked enable EXT4 DISCARD here<6>[ 9.885731@3] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: noauto_da_alloc<4>[ 9.898498@0] aml_nftl_open ok!<4>[ 9.899197@0] force enable DISCARD here for ext4 fs<4>[ 9.908704@0] checked enable EXT4 DISCARD here<6>[ 9.908733@0] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)<14>[ 9.915583@0] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0<4>[ 9.923089@0] blktrans_ioctl -cmd: 125d,801c0204,64<4>[ 9.928048@0] aml_nftl_open ok!<4>[ 9.931850@0] force enable DISCARD here for ext4 fs<4>[ 9.935953@0] EXT4-fs (data): Ignoring removed nomblk_io_submit option<4>[ 9.950804@0] checked enable EXT4 DISCARD here<6>[ 9.950834@0] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro<14>[ 9.959908@0] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0<14>[ 9.969692@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/data<4>[ 10.042380@2] aml_nftl_open ok!<4>[ 10.042459@2] aml_nftl_open ok!<14>[ 10.054815@0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)<14>[ 10.054876@0] e2fsck: /dev/block/data: clean, 10782/361440 files, 339634/1443840 blocks<4>[ 10.062088@0] aml_nftl_open ok!<4>[ 10.065708@0] force enable DISCARD here for ext4 fs<4>[ 10.069890@0] EXT4-fs (data): Ignoring removed nomblk_io_submit option<4>[ 10.079620@0] checked enable EXT4 DISCARD here<6>[ 10.080804@0] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic<14>[ 10.090605@0] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0<4>[ 10.097846@0] aml_nftl_open ok!<4>[ 10.101600@0] force enable DISCARD here for ext4 fs<4>[ 10.105728@0] EXT4-fs (cache): Ignoring removed nomblk_io_submit option<4>[ 10.116046@0] checked enable EXT4 DISCARD here<6>[ 10.116731@0] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro<14>[ 10.127103@0] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0<14>[ 10.135805@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache<4>[ 10.144497@2] aml_nftl_open ok!<4>[ 10.144573@2] aml_nftl_open ok!<14>[ 10.154131@0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)<14>[ 10.154185@0] e2fsck: /dev/block/cache: clean, 16/32768 files, 4211/131072 blocks<4>[ 10.160874@0] aml_nftl_open ok!<4>[ 10.164491@0] force enable DISCARD here for ext4 fs<4>[ 10.168643@0] EXT4-fs (cache): Ignoring removed nomblk_io_submit option<4>[ 10.178373@0] checked enable EXT4 DISCARD here<6>[ 10.179642@0] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic<14>[ 10.189604@0] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0<7>[ 10.243759@0] config uart_ao_ttyS0:: Character length 8bits/char<6>[ 10.245759@2] binder: 143:143 transaction failed 29189, size 0-0<4>[ 10.288141@1] buf[0]=27,buf[1]=9b,err=4<4>[ 10.288175@1] M8:adc=434,TS_C=7,flag=1<4>[ 10.290093@1] efuse_flag=a<4>[ 10.292757@1] amlogic_thermal_probe, this chip is trimmed, use thermal<6>[ 10.300623@1] amlogic-thermal aml_thermal: amlogic thermal probe start<4>[ 10.305767@1] #thermal-cells=7<4>[ 10.309053@1] keep_mode is disabled<4>[ 10.312278@1] pdata->temp_trip_count=4<4>[ 10.315992@1] temperature=70 on trip point=0<4>[ 10.320865@1] fixing high_freq=1608001 to 1608000 at trip point 0,level=2<4>[ 10.326993@1] fixing low_freq=1608001 to 1608000 at trip point 0,level=2<4>[ 10.333674@1] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511<4>[ 10.340097@1] cpu[0] core num==3<4>[ 10.343295@1] gpu[0] core num==5<4>[ 10.346500@1] temperature=80 on trip point=1<4>[ 10.350755@1] fixing high_freq=1200001 to 1200000 at trip point 1,level=6<4>[ 10.357509@1] fixing low_freq=1200001 to 1200000 at trip point 1,level=6<4>[ 10.364183@1] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435<4>[ 10.370609@1] cpu[1] core num==2<4>[ 10.373807@1] gpu[1] core num==4<4>[ 10.377017@1] temperature=90 on trip point=2<4>[ 10.381283@1] fixing high_freq=800001 to 696000 at trip point 2,level=11<4>[ 10.387937@1] fixing low_freq=800001 to 696000 at trip point 2,level=11<4>[ 10.394521@1] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328<4>[ 10.400943@1] cpu[2] core num==2<4>[ 10.404145@1] gpu[2] core num==3<4>[ 10.407352@1] temperature=260 on trip point=3<4>[ 10.411702@1] fixing high_freq=-1 to -22 at trip point 3,level=-1<4>[ 10.417753@1] fixing low_freq=-1 to -22 at trip point 3,level=-1<4>[ 10.423741@1] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1<4>[ 10.429990@1] cpu[3] core num==-1<4>[ 10.433271@1] gpu[3] core num==-1<4>[ 10.436566@1] idle interval=1000<4>[ 10.439787@1] pdata->name:aml_thermal, pdata:ed186e00<4>[ 10.444799@1] amlogic_thermal_init_from_dts, 998<4>[ 10.449393@1] amlogic_thermal_initialize, 1014, pdata:ed186e00<4>[ 10.455859@1] tmp_trip[0].cpu_core_upper=1<4>[ 10.459281@1] tmp_trip[1].cpu_core_upper=2<4>[ 10.463385@1] tmp_trip[2].cpu_core_upper=2<4>[ 10.467432@1] tmp_trip[3].cpu_core_upper=-1<6>[ 10.471610@1] aml_thermal bind thermal-cpucore-0 okay !<6>[ 10.476818@1] aml_thermal bind thermal-cpufreq-0 okay !<4>[ 10.482010@1] tmp_trip[0].gpu_core_upper=1<4>[ 10.486074@1] tmp_trip[1].gpu_core_upper=2<38>[ 10.489982@0] logd.auditd: start<4>[ 10.495491@1] tmp_trip[2].gpu_core_upper=3<4>[ 10.497425@1] tmp_trip[3].gpu_core_upper=-1<6>[ 10.501603@1] aml_thermal bind thermal-gpucore-0 okay !<4>[ 10.506780@1] pdata->tmp_trip[0].gpu_lower_level=1<4>[ 10.511565@1] pdata->tmp_trip[0].gpu_upper_level=1<4>[ 10.516321@1] pdata->tmp_trip[1].gpu_lower_level=2<4>[ 10.521157@1] pdata->tmp_trip[1].gpu_upper_level=2<4>[ 10.525861@1] pdata->tmp_trip[2].gpu_lower_level=3<4>[ 10.530630@1] pdata->tmp_trip[2].gpu_upper_level=3<4>[ 10.535395@1] pdata->tmp_trip[3].gpu_lower_level=-1<4>[ 10.540247@1] pdata->tmp_trip[3].gpu_upper_level=-1<6>[ 10.545104@1] aml_thermal bind thermal-gpufreq-0 okay !<6>[ 10.550433@1] amlogic: Kernel Thermal management registered<6>[ 10.555844@1] amlogic-thermal aml_thermal: amlogic thermal probe done<4>[ 10.563840@1] video first pts = 0<4>[ 10.565876@1] IEC958 16bit<4>[ 10.568240@1] hdmitx: audio: aout notify rate 48000<4>[ 10.573115@1] hdmitx: audio: aout notify size 16<4>[ 10.577682@1] hdmitx: audio: no update<4>[ 10.581442@1] aml_i2s_close device type 4 <7>[ 10.585588@1] enter aml_set_bias_level level: 1<7>[ 10.585597@1] enter aml_set_bias_level level: 2<4>[ 10.585969@1] IEC958 16bit<4>[ 10.588176@1] hdmitx: audio: aout notify rate 48000<4>[ 10.593050@1] hdmitx: audio: aout notify size 16<4>[ 10.597618@1] hdmitx: audio: no update<4>[ 10.601364@1] aml_i2s_close device type 8 <4>[ 10.606143@1] aml_i2s_close device type 1 <7>[ 10.609559@1] enter aml_set_bias_level level: 1<7>[ 10.609565@1] enter aml_set_bias_level level: 2<4>[ 10.609687@1] IEC958 16bit<6>[ 10.610097@0] read descriptors<6>[ 10.610107@0] read strings<4>[ 10.617940@1] hdmitx: audio: aout notify rate 48000<4>[ 10.622781@1] hdmitx: audio: aout notify size 16<4>[ 10.627353@1] hdmitx: audio: no update<4>[ 10.631135@1] aml_i2s_close device type 2 <4>[ 10.637659@1] vfm_map_store:rm default<4>[ 10.638922@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo<11>[ 10.645795@1] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'<11>[ 10.655420@1] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'<11>[ 10.667876@1] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'<11>[ 10.677733@1] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'<11>[ 10.691940@1] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'<11>[ 10.700110@1] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'<11>[ 10.712598@1] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'<11>[ 10.722470@1] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'<11>[ 10.736104@1] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'<11>[ 10.742741@1] init: cannot find '/system/bin/rild', disabling 'ril-daemon'<11>[ 10.750997@1] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'<3>[ 10.764243@1] android_usb: already disabled<6>[ 10.764509@1] mtp_bind_config<4>[ 10.766257@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode<4>[ 10.766257@0] <4>[ 10.777511@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode<4>[ 10.777511@0] <4>[ 10.789178@1] WARN::ep_dequeue:413: bogus device state<4>[ 10.789178@1] <6>[ 10.795766@1] mtp_bind_config<6>[ 10.797007@0] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS<4>[ 10.807194@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode<4>[ 10.807194@0] <4>[ 10.847712@0] cur_mode = 0<4>[ 10.847753@0] [0x0] = 0x1dd0190<4>[ 10.847917@0] [0x4] = 0xf800ca<4>[ 10.851058@0] [0x8] = 0x82006e<6>[ 10.852837@2] warning: `su' uses 32-bit capabilities (legacy support in use)<4>[ 10.854680@2] tvmode set to 720p<4>[ 10.854690@2] set_vout_mode[256]fps_target_mode=11<4>[ 10.854692@2] mode is 11,sync_duration_den=1,sync_duration_num=60<4>[ 10.854696@2] TV mode 720p selected.<4>[ 10.854701@2] tvoutc_setmode[512]<4>[ 10.854702@2] tvoutc_setmode[523] mode is 11<4>[ 10.854705@2] vinfo mode is: 720p<4>[ 10.854706@2] new mode =720p set ok<4>[ 10.854712@2] hdmitx: video: get current mode: 720p<4>[ 10.854714@2] is_similar_hdmi_vic[326] vic_old=16,mode_new=11<4>[ 10.854718@2] hdmitx: video: get current mode: 720p<4>[ 10.854721@2] is_similar_hdmi_vic[326] vic_old=16,mode_new=11<4>[ 10.854725@2] hdmitx: system: gate/pwr cmd: 7<4>[ 10.854776@2] hdmitx: system: already init VIC = 0 Now VIC = 4<4>[ 10.854780@2] hdmitx: system: 4 (cd0,cs0,pm1,vd0,1) <4>[ 10.854781@2] hdmitx: system: gate/pwr cmd: 0<4>[ 10.854784@2] hdmitx: system: hw reset<4>[ 10.855832@2] hdmitx: audio: SPDIF<4>[ 10.855889@2] hdmitx: system: reconfig packet setting done<4>[ 10.875885@2] hdmitx: system: set pll<4>[ 10.875887@2] hdmitx: system: param->VIC:4<4>[ 10.875892@2] mode is: 11<4>[ 10.875895@2] VPU_VIU_VENC_MUX_CTRL: 0x22a<4>[ 10.875896@2] viu chan = 1<4>[ 10.875897@2] VPU_VIU_VENC_MUX_CTRL: 0x22a<4>[ 10.875898@2] config HPLL<4>[ 10.875900@2] set_hpll_clk_out[81] clk = 2970<4>[ 10.974506@0] [0xc] = 0x3c0030<4>[ 10.977337@0] [0x10] = 0x30fa0013<4>[ 10.979755@2] config HPLL done<4>[ 10.979767@2] enc_vpu_bridge_reset[292]<4>[ 10.987747@0] [0x18] = 0x6f19000<4>[ 10.990752@0] [0x1c] = 0x9f40<4>[ 10.993650@0] [0x20] = 0x0<4>[ 10.996320@0] [0x24] = 0x0<4>[ 10.999047@0] [0x28] = 0x0<4>[ 11.001757@0] set_remote_mode[69]<11>[ 11.002632@2] dig: data_integrity_guard main!<4>[ 11.016576@1] blktrans_ioctl -cmd: 125d,801c0204,64<6>[ 11.020658@1] EXT4-fs (system): re-mounted. Opts: (null)<4>[ 11.114141@2] hdmitx: system: phy setting done<4>[ 11.114181@2] Sink is HDMI device<4>[ 11.116255@2] No sink attached<4>[ 11.119322@2] hdmitx: audio: audio channel num is 1<4>[ 11.124264@2] hdmitx: audio: SPDIF<4>[ 11.127525@2] hdmitx: audio: current VIC: 4<4>[ 11.131962@2] hdmitx: audio: audio sample rate: 3<4>[ 11.136451@2] hdmitx: audio: set audio N para<4>[ 11.140719@2] hdmitx: audio: PCM out to HDMI<4>[ 11.144942@2] hdmitx: audio: i2s_to_spdif_flag:1 <4>[ 11.149618@2] hdmitx: audio: Enable audio spdif to HDMI<4>[ 11.154846@2] hdmitx: audio: Audio Type: PCM<4>[ 11.164166@2] set_vout_mode[264]<4>[ 11.230908@2] buf=0<4>[ 11.230935@2] IEC958_mode_raw=0<4>[ 11.231082@2] osd0=>x:0 ,y:0,w:1920,h:1080<4>[ 11.231082@2] osd1=> x:0,y:0,w:18,h:18<4>[ 11.247576@2] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 11.247948@2] osd[1].scaledata: 1920 1280 1080 720<4>[ 11.252853@2] osd[1].pandata: 0 0 0 0<6>[ 11.537428@3] EXT4-fs (system): re-mounted. Opts: (null)<6>[ 11.716988@0] EXT4-fs (system): re-mounted. Opts: (null)<11>[ 11.945430@0] init: untracked pid 344 exited with status 0<4>[ 13.016422@1] force enable DISCARD here for ext4 fs<4>[ 13.016926@1] checked enable EXT4 DISCARD here<4>[ 13.020259@1] EXT4-fs (zram0): mounting with "discard" option, but the device does not support discard<6>[ 13.030966@0] EXT4-fs (zram0): mounted filesystem with ordered data mode. Opts: (null)<7>[ 14.059754@3] -----hotplug:2<4>[ 14.130069@2] IRQ94 no longer affine to CPU2<5>[ 14.130284@1] CPU2: shutdown<4>[ 14.270182@1] IRQ93 no longer affine to CPU1<5>[ 14.270415@0] CPU1: shutdown<7>[ 15.609875@0] enter aml_set_bias_level level: 1<7>[ 15.609879@0] enter aml_set_bias_level level: 2<7>[ 15.639833@3] enter aml_set_bias_level level: 1<7>[ 15.639837@3] enter aml_set_bias_level level: 2<4>[ 17.270213@0] vout [tv_set_vframe_rate_end_hint] return mode = 11, policy = 1!<4>[ 17.271939@0] vout [framerate_automation_set_mode] mode_target = 11<4>[ 17.279793@3] +++++++++++++++++framerate_automation_set_mode[1128]auto_mode=0++++++++++++++++<6>[ 17.611956@3] request_suspend_state: wakeup (3->0) at 17492242000 (1970-01-01 00:00:13.157126000 UTC)<4>[ 17.611959@3] request_suspend_state,169,old_sleep=0,new_state=0<4>[ 36.859882@0] write pen_release: 1<4>[ 36.860092@1] CPU1: Booted secondary processor<6>[ 38.243241@0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:<6>[ 38.243246@0] lowmemorykiller: oom_adj 0 => oom_score_adj 0<6>[ 38.243248@0] lowmemorykiller: oom_adj 1 => oom_score_adj 58<6>[ 38.243249@0] lowmemorykiller: oom_adj 2 => oom_score_adj 117<6>[ 38.243250@0] lowmemorykiller: oom_adj 3 => oom_score_adj 176<6>[ 38.243252@0] lowmemorykiller: oom_adj 9 => oom_score_adj 529<6>[ 38.243253@0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000<7>[ 38.359764@3] -----hotplug:2<4>[ 38.420096@3] IRQ95 no longer affine to CPU3<5>[ 38.420318@0] CPU3: shutdown<6>[ 39.427952@1] acc_open<6>[ 39.427962@1] acc_release<6>[ 39.699097@1] netdev_open<6>[ 39.699098@1] Ethernet reset<4>[ 39.699103@1] NET MDA descpter start addr=ebd8f000<4>[ 39.699537@1] phy_interface = 1<4>[ 39.699540@1] aml_phy_init: trying to attach to 0:00<4>[ 39.699886@1] --1--write mac add to:ed9a27c8: 00 11 6d 09 09 67 |.m..g|<4>[ 39.699895@1] unkown current key-name,key_read_show:1396<4>[ 39.699899@1] version NO error<4>[ 39.699900@1] ret = -22<4>[ 39.699900@1] print_buff=<4>[ 39.699906@1] --2--write mac add to:ed9a27c8: 00 11 6d 09 09 67 |.m..g|<4>[ 39.699912@1] write mac add to:ed9a27c8: 00 11 6d 09 09 67 |.m..g|<4>[ 39.699915@1] Current DMA mode=0, set mode=621c100<7>[ 39.699936@1] eth0: opened (irq 40).<4>[ 39.699939@1] ether leave promiscuous mode<4>[ 39.699941@1] ether leave all muticast mode<4>[ 39.699942@1] changed the Multicast,mcount=1<4>[ 39.699946@1] add mac address:33:33:00:00:00:01,bit=1<4>[ 39.699947@1] set hash low=2,high=0<4>[ 39.699949@1] changed the filter setting to :4<4>[ 39.699954@1] changed the Multicast,mcount=1<4>[ 39.699957@1] add mac address:33:33:00:00:00:01,bit=1<4>[ 39.700009@1] changed the Multicast,mcount=2<4>[ 39.700011@1] add mac address:33:33:00:00:00:01,bit=1<4>[ 39.700014@1] add mac address:01:00:5e:00:00:01,bit=32<4>[ 39.700015@1] set hash low=2,high=1<4>[ 39.700017@1] changed the filter setting to :4<6>[ 39.700025@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready<4>[ 40.347716@1] dhd_module_init in<4>[ 40.347747@1] wifi_setup_dt<4>[ 40.348086@1] wifi_request_32k_clk : ON-->ON for sdio_wifi<4>[ 40.359886@1] interrupt_pin(133) : (null)<4>[ 40.359898@0] write pen_release: 2<4>[ 40.359902@1] reg:2620,clearmask=100010,setmask=0<4>[ 40.359905@1] reg:2622,clearmask=ff,set pin=133<4>[ 40.359907@1] reg:2623,clearmask=70000,setmask=4<4>[ 40.359909@1] interrupt_pin(133) : sdio_wifi<4>[ 40.359911@1] power_on_pin(6) : (null)<4>[ 40.359916@1] power_on_pin(6) : sdio_wifi<4>[ 40.359918@1] power_on_pin2(123) : (null)<4>[ 40.359923@1] power_on_pin2(123) : sdio_wifi<4>[ 40.359992@1] ======== bcm_wlan_set_plat_data ========<4>[ 40.359993@1] host_oob_irq: 100
<4>[ 40.359994@1] host_oob_irq_flags=4<4>[ 40.359996@1] dhd_wifi_platform_load: Enter<4>[ 40.359999@1] Power-up adapter 'DHD generic adapter'<4>[ 40.360111@2] CPU2: Booted secondary processor<4>[ 40.360782@1] wifi_platform_set_power = 1<4>[ 40.360784@1] ======== PULL WL_REG_ON HIGH! ========<4>[ 40.360790@1] WIFI Disable! 6<4>[ 40.658040@2] avc open<4>[ 40.662937@0] amvenc_avc check CMA pool sucess, max instance: 1.<4>[ 40.671253@0] amvenc_avc_open: allocating phys 2dc00000, size 18432k, wq:eac65000.<4>[ 40.671257@0] amvenc_avc memory config sucess, buff start:0x2dc00000, size is 0x1200000, wq:eac65000.<4>[ 40.671336@0] avc release, wq:eac65000<4>[ 40.671340@0] remove encode_work_queue eac65000 sucess, destroy_encode_work_queue line 2408.<4>[ 40.676387@0] ionvideo open<4>[ 40.676397@0] ionvideo_stop_generating!!!!<4>[ 40.676410@0] ionvideo release<4>[ 40.681184@0] ionvideo open<4>[ 40.681200@0] ionvideo_stop_generating!!!!<4>[ 40.681211@0] ionvideo release<4>[ 40.684583@0] ionvideo open<4>[ 40.684591@0] ionvideo_stop_generating!!!!<4>[ 40.684600@0] ionvideo release<4>[ 40.688237@0] ionvideo open<4>[ 40.688246@0] ionvideo_stop_generating!!!!<4>[ 40.688256@0] ionvideo release<4>[ 40.690439@0] ionvideo open<4>[ 40.690454@0] ionvideo_stop_generating!!!!<4>[ 40.690463@0] ionvideo release<4>[ 40.699891@0] ionvideo open<4>[ 40.699898@0] ionvideo_stop_generating!!!!<4>[ 40.699907@0] ionvideo release<4>[ 40.704872@0] ionvideo open<4>[ 40.704882@0] ionvideo_stop_generating!!!!<4>[ 40.704894@0] ionvideo release<4>[ 40.707888@0] ionvideo open<4>[ 40.707896@0] ionvideo_stop_generating!!!!<4>[ 40.707906@0] ionvideo release<4>[ 40.720671@0] WIFI Enable! 6<4>[ 40.759926@0] write pen_release: 3<4>[ 40.760076@3] CPU3: Booted secondary processor<4>[ 41.171470@2] Digital output mode: 0 - PCM<4>[ 41.172905@2] Digital output mode: 0 - PCM<4>[ 41.209001@0] Digital output mode: 0 - PCM<4>[ 41.351711@1] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.<4>[ 41.919816@2] [aml_sdio_timeout][0;40;33m time_start_cnt:997<4>[ 41.919816@2] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940<4>[ 41.919816@2] [0m<4>[ 42.929777@2] [aml_sdio_timeout][0;40;33m time_start_cnt:1009<4>[ 42.929777@2] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940<4>[ 42.929794@2] [0msystemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.768080@0] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.768092@0] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.768101@0] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.768111@0] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.768116@0] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.768126@0] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.768132@0] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.768145@0] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 43.768150@0] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 43.768155@0] systemcontrol: [ubootenv] read failed <11>[ 43.768161@0] systemcontrol: [ubootenv] ubootenv.var.firstboot is not a ubootenv varible.<4>[ 43.963493@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)<4>[ 43.964951@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 43.976388@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 43.978961@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)<11>[ 44.016140@0] dig: data_integrity_guard isBootCompleted:1!<11>[ 44.017230@1] dig: dig set_data_ro_count count:0!<6>[ 44.036795@1] sdio: new high speed SDIO card at address 0001, clock 35416666, 4-bit-bus-width<4>[ 44.043070@2] [sdio_reinit] finish<4>[ 44.249746@2] wifi_platform_bus_enumerate device present 1<4>[ 44.249749@2] ======== Card detection to detect SDIO card! ========<4>[ 44.265921@2] bcmsdh_register: register client driver<4>[ 44.270542@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter<4>[ 44.275484@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter<4>[ 44.275492@3] bus num (host idx)=1, slot num (rca)=1<4>[ 44.275494@3] found adapter info 'DHD generic adapter'<4>[ 44.298371@3] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0<4>[ 44.302512@3] DHD: dongle ram size is set to 294912(orig 294912) at 0x0<4>[ 44.302774@3] dhdsdio_probe: Disable prop_txstatus<4>[ 44.309850@0] wl_create_event_handler(): thread:wl_event_handler:48f started<4>[ 44.310299@0] tsk Enter, tsk = 0xf38af44c<4>[ 44.311146@0] dhd_attach(): thread:dhd_watchdog_thread:490 started<4>[ 44.311263@0] dhd_attach(): thread:dhd_dpc:491 started<4>[ 44.311327@0] dhd_attach(): thread:dhd_rxf:492 started<4>[ 44.311339@0] dhd_deferred_work_init: work queue initialized <4>[ 44.311602@0] Dongle Host Driver, version 1.141.66.1 (r483454)<4>[ 44.311602@0] Compiled in drivers/net/wireless/bcmdhd on Feb 3 2016 at 12:12:00<4>[ 44.312302@0] Register interface [wlan0] MAC: 00:90:4c:11:22:33<4>[ 44.312302@0] <4>[ 44.312309@0] dhd_prot_ioctl : bus is down. we have nothing to do<4>[ 44.314089@3] bcmsdh_oob_intr_unregister: Enter<4>[ 44.314094@3] bcmsdh_oob_intr_unregister: irq is not registered<4>[ 44.314112@3] dhd_bus_devreset: WLAN OFF DONE<4>[ 44.315297@3] wifi_platform_set_power = 0<4>[ 44.315301@3] ======== PULL WL_REG_ON LOW! ========<4>[ 44.315457@3] dhd_module_init: Exit err=0<4>[ 45.066713@1] dhd_open: Enter ec401000<4>[ 45.066770@1] <4>[ 45.066770@1] Dongle Host Driver, version 1.141.66.1 (r483454)<4>[ 45.066770@1] Compiled in drivers/net/wireless/bcmdhd on Feb 3 2016 at 12:12:00<4>[ 45.079831@1] wl_android_wifi_on in 1<4>[ 45.083331@1] wl_android_wifi_on in 2: g_wifi_on=0<4>[ 45.083338@1] wifi_platform_set_power = 1<4>[ 45.083341@1] ======== PULL WL_REG_ON HIGH! ========<4>[ 45.083352@1] WIFI Disable! 6<4>[ 45.285175@1] WIFI Enable! 6<4>[ 45.485018@1] sdio_reset_comm():<4>[ 45.499092@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)<4>[ 45.500878@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 45.506486@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 45.513539@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)<4>[ 45.567171@3] [sdio_reinit] finish<4>[ 45.770363@3] <4>[ 45.770363@3] <4>[ 45.770363@3] dhd_bus_devreset: == WLAN ON ==<4>[ 45.774638@3] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0<4>[ 45.775173@3] DHD: dongle ram size is set to 294912(orig 294912) at 0x0<4>[ 45.777997@3] dhd_conf_read_config: fw_count=4<4>[ 45.777999@3] dhd_conf_read_config: name=fw_bcm4339a0e_ag.bin, mac_count=5<4>[ 45.778003@3] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.778006@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.778008@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.778011@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.778013@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.778015@3] dhd_conf_read_config: name=fw_bcm4339a0e_ag_p2p.bin, mac_count=5<4>[ 45.778018@3] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.778020@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.778023@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.778025@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.778027@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.778029@3] dhd_conf_read_config: name=fw_bcm4339a0e_ag_apsta.bin, mac_count=5<4>[ 45.778032@3] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.778035@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.778037@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.778039@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.778042@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.778044@3] dhd_conf_read_config: name=fw_bcm4339a0e_ag_mfg.bin, mac_count=5<4>[ 45.778046@3] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.778049@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.778051@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.778054@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.778056@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.778093@3] dhd_conf_read_config: nv_count=1<4>[ 45.778095@3] dhd_conf_read_config: name=nvram_ap6335e.txt, mac_count=5<4>[ 45.778098@3] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.778100@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.778103@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.778105@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.778108@3] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.778816@3] dhd_conf_read_config: bcn_timeout = 20<4>[ 45.778925@3] dhd_conf_read_config: kso_enable = 0<4>[ 45.778963@3] dhd_conf_set_fw_name_by_chip: firmware_path=/etc/wifi/40183/fw_bcm40183b2.bin<4>[ 45.778964@3] dhd_conf_set_nv_name_by_chip: yxg ----nv_path=/etc/wifi/40183/ap6330_nvram.txt<4>[ 45.778968@3] sdioh_cis_read: func_cis_ptr[0]=0x1070<4>[ 46.066340@3] dhd_conf_set_fw_name_by_mac: fw_typ=0 != fw_type_new=2<4>[ 46.067325@3] dhd_conf_set_fw_name_by_mac: fw_typ=0 != fw_type_new=1<4>[ 46.073953@3] dhd_conf_set_fw_name_by_mac: fw_typ=0 != fw_type_new=3<4>[ 46.080616@3] sdioh_cis_read: func_cis_ptr[0]=0x1070<4>[ 46.103838@3] Final fw_path=/etc/wifi/40183/fw_bcm40183b2.bin<4>[ 46.103956@3] Final nv_path=/etc/wifi/40183/ap6330_nvram.txt<4>[ 46.110017@3] Final conf_path=/system/etc/wifi/config.txt<4>[ 46.150584@3] sdioh_request_buffer: [1] doing memory copy buf=e9ef7000, len=1939<4>[ 43.929749@0] [aml_sdio_timeout][0;40;33m time_start_cnt:996<4>[ 43.929749@0] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940<4>[ 43.929749@0] [0m<4>[ 46.155226@0] NVRAM version: AP6330_NVRAM_V1.0_20121130
<4>[ 46.160020@1] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.<4>[ 46.429632@3] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)<4>[ 46.430153@3] bcmsdh_oob_intr_register: Enter<4>[ 46.434338@3] bcmsdh_oob_intr_register OOB irq=100 flags=4<4>[ 46.439830@3] bcmsdh_oob_intr_register: enable_irq_wake<4>[ 46.446130@0] dhd_conf_set_band: Set band 0<4>[ 46.451126@0] Firmware up: op_mode=0x0005, MAC=6c:fa:a7:5a:78:44<4>[ 46.455853@0] dhd_conf_set_country: Set country US, revision 0<4>[ 46.534710@3] Country code: US (US/0)<4>[ 46.535016@3] dhd_conf_set_roam: Set roam_off 1<4>[ 46.539325@3] dhd_preinit_ioctls Set ampdu_ba_wsize to 32 failed -2<4>[ 46.544148@3] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23<4>[ 46.553794@3] dhd_preinit_ioctls buf_key_b4_m4 set failed -23<4>[ 46.563714@0] Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5<4>[ 46.567353@0] Driver: 1.141.66.1 (r483454)<4>[ 46.567353@0] Firmware: wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 <4>[ 46.586586@0] dhd_preinit_ioctls wl ampdu_hostreorder failed -23<4>[ 46.587092@0] wl_android_wifi_on: Success<4>[ 46.664375@0] dhd_open: Exit ret=0<4>[ 46.993353@2] dhd_set_suspend: Remove extra suspend setting<6>[ 48.803086@1] BT_RADIO going: off<6>[ 48.803119@1] BCM_BT: going OFF<6>[ 48.829939@1] BT_RADIO going: on<6>[ 48.829980@1] BCM_BT: going ON<7>[ 48.890088@3] config uart_a_ttyS1:: Character length 8bits/char<6>[ 48.909753@3] Changing uart_a_ttyS1: baud from 0 to 115200<7>[ 48.929802@2] config uart_a_ttyS1:: Character length 8bits/char<7>[ 48.934414@2] config uart_a_ttyS1:: Character length 8bits/char<6>[ 48.949761@2] Changing uart_a_ttyS1: baud from 115200 to 2000000<4>[ 49.282468@3] Connectting with ca:60:00:95:2b:c8 channel (36) ssid "tomato_5G", len (9)<4>[ 49.282468@3] <7>[ 49.459118@1] config uart_a_ttyS1:: Character length 8bits/char<6>[ 49.469757@1] Changing uart_a_ttyS1: baud from 2000000 to 115200<7>[ 49.691930@1] config uart_a_ttyS1:: Character length 8bits/char<6>[ 49.709734@1] Changing uart_a_ttyS1: baud from 115200 to 2000000<4>[ 49.775118@3] wl_bss_connect_done succeeded with ca:60:00:95:2b:c8<4>[ 49.779215@3] wl_bss_connect_done succeeded with ca:60:00:95:2b:c8<4>[ 50.278167@3] dhd_set_suspend: Remove extra suspend setting<4>[ 50.285502@3] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 50.287768@3] ANDROID-ERROR) failed to getting batching results<4>[ 50.294122@3] dhd_pno_stop_for_batch : wifi location service is not supported<4>[ 50.300924@3] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL<4>[ 50.308382@3] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL<3>[ 50.315897@3] ANDROID-ERROR) failed to stop batching scan<4>[ 51.419737@0] function[set_tm1628_led_value] line 228 display string: 17:01 .<3>[ 53.651871@2] EXT4-fs (sdb): unable to read superblock<7>[ 53.859795@1] -----hotplug:2<4>[ 53.930100@1] IRQ93 no longer affine to CPU1<5>[ 53.930354@0] CPU1: shutdown<4>[ 54.040258@3] IRQ95 no longer affine to CPU3<5>[ 54.040511@0] CPU3: shutdown<4>[ 54.560102@0] write pen_release: 1<4>[ 54.560395@1] CPU1: Booted secondary processor<4>[ 55.860147@0] write pen_release: 3<4>[ 55.860430@3] CPU3: Booted secondary processor<6>[ 56.432321@1] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.<7>[ 61.859763@3] -----hotplug:2<4>[ 61.930139@1] IRQ93 no longer affine to CPU1<5>[ 61.930387@0] CPU1: shutdown<4>[ 62.080089@2] IRQ94 no longer affine to CPU2<5>[ 62.080325@0] CPU2: shutdown<11>[ 64.805759@0] init: untracked pid 2432 exited with status 0<4>[ 65.059873@0] write pen_release: 1<4>[ 65.060067@1] CPU1: Booted secondary processor<7>[ 67.659780@0] -----hotplug:2<4>[ 67.710707@3] IRQ95 no longer affine to CPU3<5>[ 67.710956@0] CPU3: shutdown<11>[ 70.796817@0] init: untracked pid 2435 exited with status 0<4>[ 76.859941@0] write pen_release: 2<4>[ 76.860136@2] CPU2: Booted secondary processor<7>[ 78.359892@1] -----hotplug:3<4>[ 78.401751@1] IRQ93 no longer affine to CPU1<5>[ 78.401993@0] CPU1: shutdown<4>[ 104.029730@0] function[set_tm1628_led_value] line 228 display string: 17:02 .<4>[ 164.039737@0] function[set_tm1628_led_value] line 228 display string: 17:03 .<7>[ 168.348910@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 168.349095@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 168.350430@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 168.355974@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 168.362627@0] iec958 mode PCM16<4>[ 168.365644@0] IEC958 16bit<4>[ 168.365654@0] hdmitx: audio: aout notify rate 48000<4>[ 168.365655@0] hdmitx: audio: aout notify size 16<4>[ 168.365657@0] hdmitx: audio: no update<6>[ 168.365659@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 168.368441@2] enter aml_set_bias_level level: 2<7>[ 168.368446@2] enter aml_set_bias_level level: 2<7>[ 168.368451@2] enter aml_set_bias_level level: 1<7>[ 168.368452@2] enter aml_set_bias_level level: 2<4>[ 168.368566@0] speaker_events--mute =1<7>[ 168.373628@2] enter aml_set_bias_level level: 3<7>[ 168.373636@2] enter aml_set_bias_level level: 3<6>[ 168.374142@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 168.374142@0] <6>[ 168.374144@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 171.379643@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 171.379643@0] <6>[ 171.379646@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 171.379665@0] IEC958 16bit<4>[ 171.379671@0] hdmitx: audio: aout notify rate 48000<4>[ 171.379673@0] hdmitx: audio: aout notify size 16<4>[ 171.379674@0] hdmitx: audio: no update<4>[ 171.379678@0] aml_i2s_close device type 8 <7>[ 175.529647@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 175.530147@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 175.531476@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 175.536893@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 175.543716@0] iec958 mode PCM16<4>[ 175.546813@0] IEC958 16bit<4>[ 175.550148@0] hdmitx: audio: aout notify rate 48000<4>[ 175.554271@0] hdmitx: audio: aout notify size 16<4>[ 175.554312@0] hdmitx: audio: no update<6>[ 175.554321@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 175.561748@0] enter aml_set_bias_level level: 1<7>[ 175.561752@0] enter aml_set_bias_level level: 2<6>[ 175.562597@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 175.562597@0] <6>[ 175.562600@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 178.568035@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 178.568035@0] <6>[ 178.568935@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 178.573727@0] IEC958 16bit<4>[ 178.576387@0] hdmitx: audio: aout notify rate 48000<4>[ 178.576391@0] hdmitx: audio: aout notify size 16<4>[ 178.576393@0] hdmitx: audio: no update<4>[ 178.576400@0] aml_i2s_close device type 8 <7>[ 181.214857@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 181.217028@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 181.218446@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 181.226538@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 181.231255@0] iec958 mode PCM16<4>[ 181.233755@0] IEC958 16bit<4>[ 181.236405@0] hdmitx: audio: aout notify rate 48000<4>[ 181.243370@0] hdmitx: audio: aout notify size 16<4>[ 181.245905@0] hdmitx: audio: no update<6>[ 181.249679@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 181.259004@2] enter aml_set_bias_level level: 1<7>[ 181.259077@2] enter aml_set_bias_level level: 2<6>[ 181.261595@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 181.261595@0] <6>[ 181.262400@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 184.267847@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 184.267847@0] <6>[ 184.268745@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 184.273503@0] IEC958 16bit<4>[ 184.276130@0] hdmitx: audio: aout notify rate 48000<4>[ 184.281038@0] hdmitx: audio: aout notify size 16<4>[ 184.285574@0] hdmitx: audio: no update<4>[ 184.289303@0] aml_i2s_close device type 8 <7>[ 184.454485@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 184.454753@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 184.456042@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 184.463087@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 184.468251@0] iec958 mode PCM16<4>[ 184.471452@0] IEC958 16bit<4>[ 184.471465@0] hdmitx: audio: aout notify rate 48000<4>[ 184.471470@0] hdmitx: audio: aout notify size 16<4>[ 184.471473@0] hdmitx: audio: no update<6>[ 184.471479@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 184.471631@0] enter aml_set_bias_level level: 1<7>[ 184.471637@0] enter aml_set_bias_level level: 2<6>[ 184.472968@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 184.472968@0] <6>[ 184.472973@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 186.298261@0] osd0=>x:3 ,y:1,w:1920,h:1080<4>[ 186.298261@0] osd1=> x:3,y:1,w:18,h:18<4>[ 186.314351@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 186.314749@0] osd[1].scaledata: 1920 1274 1080 718<4>[ 186.320254@0] osd[1].pandata: 0 63 0 62<4>[ 186.480977@0] osd0=>x:6 ,y:3,w:1920,h:1080<4>[ 186.480977@0] osd1=> x:6,y:3,w:18,h:18<4>[ 186.497598@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 186.497993@0] osd[1].scaledata: 1920 1268 1080 714<4>[ 186.502807@0] osd[1].pandata: 0 63 0 62<4>[ 186.658910@0] osd0=>x:9 ,y:5,w:1920,h:1080<4>[ 186.658910@0] osd1=> x:9,y:5,w:18,h:18<4>[ 186.664541@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 186.667259@0] osd[1].scaledata: 1920 1262 1080 710<4>[ 186.673647@0] osd[1].pandata: 0 63 0 62<4>[ 186.829633@0] osd0=>x:12 ,y:7,w:1920,h:1080<4>[ 186.829633@0] osd1=> x:12,y:7,w:18,h:18<4>[ 186.847899@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 186.848358@0] osd[1].scaledata: 1920 1256 1080 706<4>[ 186.853281@0] osd[1].pandata: 0 63 0 62<4>[ 187.013407@2] osd0=>x:15 ,y:8,w:1920,h:1080<4>[ 187.013407@2] osd1=> x:15,y:8,w:18,h:18<4>[ 187.031125@2] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 187.031515@2] osd[1].scaledata: 1920 1250 1080 704<4>[ 187.036950@2] osd[1].pandata: 0 63 0 62<4>[ 187.197150@2] osd0=>x:19 ,y:10,w:1920,h:1080<4>[ 187.197150@2] osd1=> x:19,y:10,w:18,h:18<4>[ 187.214460@2] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 187.214850@2] osd[1].scaledata: 1920 1242 1080 700<4>[ 187.219610@2] osd[1].pandata: 0 63 0 62<4>[ 187.366124@0] osd0=>x:22 ,y:12,w:1920,h:1080<4>[ 187.366124@0] osd1=> x:22,y:12,w:18,h:18<4>[ 187.381232@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 187.381680@0] osd[1].scaledata: 1920 1236 1080 696<4>[ 187.386486@0] osd[1].pandata: 0 63 0 62<4>[ 187.559325@2] osd0=>x:25 ,y:14,w:1920,h:1080<4>[ 187.559325@2] osd1=> x:25,y:14,w:18,h:18<4>[ 187.564621@2] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 187.567958@2] osd[1].scaledata: 1920 1230 1080 692<4>[ 187.572881@2] osd[1].pandata: 0 63 0 62<4>[ 187.738930@0] osd0=>x:28 ,y:16,w:1920,h:1080<4>[ 187.738930@0] osd1=> x:28,y:16,w:18,h:18<4>[ 187.747883@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 187.748331@0] osd[1].scaledata: 1920 1224 1080 688<4>[ 187.753449@0] osd[1].pandata: 0 63 0 62<4>[ 187.918943@0] osd0=>x:31 ,y:17,w:1920,h:1080<4>[ 187.918943@0] osd1=> x:31,y:17,w:18,h:18<4>[ 187.931229@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 187.931679@0] osd[1].scaledata: 1920 1218 1080 686<4>[ 187.936483@0] osd[1].pandata: 0 63 0 62<4>[ 188.098125@2] osd0=>x:35 ,y:19,w:1920,h:1080<4>[ 188.098125@2] osd1=> x:35,y:19,w:18,h:18<4>[ 188.114424@2] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 188.114810@2] osd[1].scaledata: 1920 1210 1080 682<4>[ 188.119584@2] osd[1].pandata: 0 63 0 62<4>[ 188.276469@0] osd0=>x:38 ,y:21,w:1920,h:1080<4>[ 188.276469@0] osd1=> x:38,y:21,w:18,h:18<4>[ 188.281232@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 188.285182@0] osd[1].scaledata: 1920 1204 1080 678<4>[ 188.291673@0] osd[1].pandata: 0 63 0 62<4>[ 188.465587@2] osd0=>x:41 ,y:23,w:1920,h:1080<4>[ 188.465587@2] osd1=> x:41,y:23,w:18,h:18<4>[ 188.481101@2] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 188.481488@2] osd[1].scaledata: 1920 1198 1080 674<4>[ 188.486250@2] osd[1].pandata: 0 63 0 62<4>[ 188.646468@0] osd0=>x:44 ,y:25,w:1920,h:1080<4>[ 188.646468@0] osd1=> x:44,y:25,w:18,h:18<4>[ 188.664566@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 188.665022@0] osd[1].scaledata: 1920 1192 1080 670<4>[ 188.670079@0] osd[1].pandata: 0 63 0 62<4>[ 188.814370@0] osd0=>x:47 ,y:26,w:1920,h:1080<4>[ 188.814370@0] osd1=> x:47,y:26,w:18,h:18<4>[ 188.831270@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 188.831727@0] osd[1].scaledata: 1920 1186 1080 668<4>[ 188.836489@0] osd[1].pandata: 0 63 0 62<4>[ 188.998989@0] osd0=>x:51 ,y:28,w:1920,h:1080<4>[ 188.998989@0] osd1=> x:51,y:28,w:18,h:18<4>[ 189.015276@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 189.015734@0] osd[1].scaledata: 1920 1178 1080 664<4>[ 189.020763@0] osd[1].pandata: 0 63 0 62<4>[ 189.193784@0] osd0=>x:54 ,y:30,w:1920,h:1080<4>[ 189.193784@0] osd1=> x:54,y:30,w:18,h:18<4>[ 189.214450@2] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 189.214841@2] osd[1].scaledata: 1920 1172 1080 660<4>[ 189.219603@2] osd[1].pandata: 0 63 0 62<4>[ 189.366175@0] osd0=>x:57 ,y:32,w:1920,h:1080<4>[ 189.366175@0] osd1=> x:57,y:32,w:18,h:18<4>[ 189.381234@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 189.381681@0] osd[1].scaledata: 1920 1166 1080 656<4>[ 189.386462@0] osd[1].pandata: 0 63 0 62<6>[ 192.449120@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 192.449120@0] <6>[ 192.450027@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 192.454959@0] IEC958 16bit<4>[ 192.457433@0] hdmitx: audio: aout notify rate 48000<4>[ 192.457436@0] hdmitx: audio: aout notify size 16<4>[ 192.457439@0] hdmitx: audio: no update<4>[ 192.457446@0] aml_i2s_close device type 8 <7>[ 193.008570@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 193.009421@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 193.011043@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 193.016372@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 193.024290@0] iec958 mode PCM16<4>[ 193.024322@0] IEC958 16bit<4>[ 193.024337@0] hdmitx: audio: aout notify rate 48000<4>[ 193.024345@0] hdmitx: audio: aout notify size 16<4>[ 193.024350@0] hdmitx: audio: no update<6>[ 193.024362@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 193.025019@0] enter aml_set_bias_level level: 1<7>[ 193.025029@0] enter aml_set_bias_level level: 2<6>[ 193.028532@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 193.028532@0] <6>[ 193.028540@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 197.719384@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 197.719384@0] <6>[ 197.720293@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 197.725090@0] IEC958 16bit<4>[ 197.727713@0] hdmitx: audio: aout notify rate 48000<4>[ 197.732634@0] hdmitx: audio: aout notify size 16<4>[ 197.737136@0] hdmitx: audio: no update<4>[ 197.740905@0] aml_i2s_close device type 8 <7>[ 198.246942@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 198.248304@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 198.249664@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 198.259176@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 198.262054@0] iec958 mode PCM16<4>[ 198.265016@0] IEC958 16bit<4>[ 198.267657@0] hdmitx: audio: aout notify rate 48000<4>[ 198.272423@0] hdmitx: audio: aout notify size 16<4>[ 198.276990@0] hdmitx: audio: no update<6>[ 198.280747@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 198.286858@2] enter aml_set_bias_level level: 1<7>[ 198.286866@2] enter aml_set_bias_level level: 2<6>[ 198.287351@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 198.287351@0] <6>[ 198.293167@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 201.298557@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 201.298557@0] <6>[ 201.299449@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 201.304224@0] IEC958 16bit<4>[ 201.304230@0] hdmitx: audio: aout notify rate 48000<4>[ 201.304231@0] hdmitx: audio: aout notify size 16<4>[ 201.304233@0] hdmitx: audio: no update<4>[ 201.304237@0] aml_i2s_close device type 8 <7>[ 202.861586@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 202.861704@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 202.861706@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 202.861708@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 202.861710@0] iec958 mode PCM16<4>[ 202.861714@0] IEC958 16bit<4>[ 202.861718@0] hdmitx: audio: aout notify rate 48000<4>[ 202.861719@0] hdmitx: audio: aout notify size 16<4>[ 202.861720@0] hdmitx: audio: no update<6>[ 202.861722@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 202.861763@2] enter aml_set_bias_level level: 1<7>[ 202.861765@2] enter aml_set_bias_level level: 2<6>[ 202.862175@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 202.862175@0] <6>[ 202.862176@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 205.867660@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 205.867660@0] <6>[ 205.868563@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 205.873438@0] IEC958 16bit<4>[ 205.873447@0] hdmitx: audio: aout notify rate 48000<4>[ 205.873451@0] hdmitx: audio: aout notify size 16<4>[ 205.873453@0] hdmitx: audio: no update<4>[ 205.873460@0] aml_i2s_close device type 8 <7>[ 205.916391@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 205.916667@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 205.916675@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 205.916679@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 205.916684@0] iec958 mode PCM16<4>[ 205.916689@0] IEC958 16bit<4>[ 205.916695@0] hdmitx: audio: aout notify rate 48000<4>[ 205.916698@0] hdmitx: audio: aout notify size 16<4>[ 205.916700@0] hdmitx: audio: no update<6>[ 205.916704@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 205.917642@0] enter aml_set_bias_level level: 1<7>[ 205.917647@0] enter aml_set_bias_level level: 2<6>[ 205.918702@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 205.918702@0] <6>[ 205.918706@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 206.359887@0] write pen_release: 1<4>[ 206.360087@1] CPU1: Booted secondary processor<6>[ 208.924274@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 208.924274@0] <6>[ 208.924278@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 208.924310@0] IEC958 16bit<4>[ 208.924320@0] hdmitx: audio: aout notify rate 48000<4>[ 208.924324@0] hdmitx: audio: aout notify size 16<4>[ 208.924325@0] hdmitx: audio: no update<4>[ 208.924332@0] aml_i2s_close device type 8 <4>[ 209.359977@0] write pen_release: 3<4>[ 209.360291@3] CPU3: Booted secondary processor<7>[ 213.934089@0] enter aml_set_bias_level level: 2<7>[ 213.934099@0] enter aml_set_bias_level level: 2<7>[ 213.934106@0] enter aml_set_bias_level level: 1<7>[ 213.934109@0] enter aml_set_bias_level level: 2<4>[ 213.934126@0] speaker_events--mute =0<7>[ 213.934185@0] enter aml_set_bias_level level: 1<7>[ 213.934192@0] enter aml_set_bias_level level: 1<7>[ 215.659785@2] -----hotplug:2<4>[ 215.750076@1] IRQ93 no longer affine to CPU1<5>[ 215.750317@0] CPU1: shutdown<4>[ 215.890281@2] IRQ94 no longer affine to CPU2<5>[ 215.890611@0] CPU2: shutdown<4>[ 217.160195@0] write pen_release: 1<4>[ 217.160492@1] CPU1: Booted secondary processor<7>[ 218.962622@0] -----hotplug:2<4>[ 219.012499@1] IRQ93 no longer affine to CPU1<5>[ 219.012745@0] CPU1: shutdown<4>[ 220.421789@3] IRQ95 no longer affine to CPU3<5>[ 220.422030@0] CPU3: shutdown<4>[ 224.049719@0] function[set_tm1628_led_value] line 228 display string: 17:04 .<4>[ 250.389814@0] write pen_release: 1<4>[ 250.389985@1] CPU1: Booted secondary processor<4>[ 251.721881@1] IRQ93 no longer affine to CPU1<5>[ 251.722122@0] CPU1: shutdown<4>[ 284.059758@0] function[set_tm1628_led_value] line 228 display string: 17:05 .<7>[ 284.115797@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 284.115939@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 284.117181@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 284.123264@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 284.129323@0] iec958 mode PCM16<4>[ 284.132925@0] IEC958 16bit<4>[ 284.135129@0] hdmitx: audio: aout notify rate 48000<4>[ 284.141313@0] hdmitx: audio: aout notify size 16<4>[ 284.144581@0] hdmitx: audio: no update<6>[ 284.148329@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 284.158991@0] enter aml_set_bias_level level: 2<7>[ 284.159011@0] enter aml_set_bias_level level: 2<7>[ 284.159023@0] enter aml_set_bias_level level: 1<7>[ 284.159029@0] enter aml_set_bias_level level: 2<4>[ 284.159052@0] speaker_events--mute =1<7>[ 284.159833@0] enter aml_set_bias_level level: 3<7>[ 284.159847@0] enter aml_set_bias_level level: 3<6>[ 284.160503@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 284.160503@0] <6>[ 284.164416@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 284.539838@0] write pen_release: 1<4>[ 284.539984@1] CPU1: Booted secondary processor<6>[ 287.169891@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 287.169891@0] <6>[ 287.170795@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 287.170825@0] IEC958 16bit<4>[ 287.170831@0] hdmitx: audio: aout notify rate 48000<4>[ 287.170834@0] hdmitx: audio: aout notify size 16<4>[ 287.170836@0] hdmitx: audio: no update<4>[ 287.170842@0] aml_i2s_close device type 8 <7>[ 288.333966@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 288.334387@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 288.335658@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 288.342297@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 288.347942@0] iec958 mode PCM16<4>[ 288.351191@0] IEC958 16bit<4>[ 288.353919@0] hdmitx: audio: aout notify rate 48000<4>[ 288.358548@0] hdmitx: audio: aout notify size 16<4>[ 288.363208@0] hdmitx: audio: no update<6>[ 288.366852@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 288.373096@0] enter aml_set_bias_level level: 1<7>[ 288.373131@0] enter aml_set_bias_level level: 2<6>[ 288.374250@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 288.374250@0] <6>[ 288.379238@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 291.384741@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 291.384741@0] <6>[ 291.385636@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 291.391256@0] IEC958 16bit<4>[ 291.393076@0] hdmitx: audio: aout notify rate 48000<4>[ 291.393078@0] hdmitx: audio: aout notify size 16<4>[ 291.393079@0] hdmitx: audio: no update<4>[ 291.393085@0] aml_i2s_close device type 8 <7>[ 293.444513@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 293.445139@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 293.446436@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 293.452660@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 293.458630@0] iec958 mode PCM16<4>[ 293.463842@0] IEC958 16bit<4>[ 293.463851@0] hdmitx: audio: aout notify rate 48000<4>[ 293.463853@0] hdmitx: audio: aout notify size 16<4>[ 293.463855@0] hdmitx: audio: no update<6>[ 293.463860@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 293.463926@0] enter aml_set_bias_level level: 1<7>[ 293.463929@0] enter aml_set_bias_level level: 2<6>[ 293.464748@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 293.464748@0] <6>[ 293.464751@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 296.470394@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 296.470394@0] <6>[ 296.471339@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 296.476097@0] IEC958 16bit<4>[ 296.478764@0] hdmitx: audio: aout notify rate 48000<4>[ 296.483864@0] hdmitx: audio: aout notify size 16<4>[ 296.488214@0] hdmitx: audio: no update<4>[ 296.492088@0] aml_i2s_close device type 8 <4>[ 296.822054@1] IRQ93 no longer affine to CPU1<5>[ 296.822296@0] CPU1: shutdown<7>[ 301.510663@0] enter aml_set_bias_level level: 2<7>[ 301.510959@0] enter aml_set_bias_level level: 2<7>[ 301.511165@0] enter aml_set_bias_level level: 1<7>[ 301.511216@0] enter aml_set_bias_level level: 2<4>[ 301.511341@0] speaker_events--mute =0<7>[ 301.511860@0] enter aml_set_bias_level level: 1<7>[ 301.512150@0] enter aml_set_bias_level level: 1<4>[ 315.390770@0] write pen_release: 1<4>[ 315.390916@1] CPU1: Booted secondary processor<7>[ 316.739336@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 316.739951@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 316.741225@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 316.746839@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 316.754231@0] iec958 mode PCM16<4>[ 316.756712@0] IEC958 16bit<4>[ 316.756725@0] hdmitx: audio: aout notify rate 48000<4>[ 316.756730@0] hdmitx: audio: aout notify size 16<4>[ 316.756734@0] hdmitx: audio: no update<6>[ 316.756749@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 316.756889@0] enter aml_set_bias_level level: 2<7>[ 316.756900@1] enter aml_set_bias_level level: 2<7>[ 316.756906@0] enter aml_set_bias_level level: 1<7>[ 316.756912@0] enter aml_set_bias_level level: 2<4>[ 316.756967@0] speaker_events--mute =1<7>[ 316.760045@0] enter aml_set_bias_level level: 3<7>[ 316.760070@1] enter aml_set_bias_level level: 3<6>[ 316.761611@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 316.761611@0] <6>[ 316.761616@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 319.767059@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 319.767059@0] <6>[ 319.767962@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 319.772769@0] IEC958 16bit<4>[ 319.775410@0] hdmitx: audio: aout notify rate 48000<4>[ 319.775413@0] hdmitx: audio: aout notify size 16<4>[ 319.775416@0] hdmitx: audio: no update<4>[ 319.775424@0] aml_i2s_close device type 8 <7>[ 320.629930@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 320.630554@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 320.631909@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 320.637430@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 320.644863@0] iec958 mode PCM16<4>[ 320.647115@0] IEC958 16bit<4>[ 320.650044@0] hdmitx: audio: aout notify rate 48000<4>[ 320.655262@0] hdmitx: audio: aout notify size 16<4>[ 320.659256@0] hdmitx: audio: no update<6>[ 320.664382@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 320.669335@0] enter aml_set_bias_level level: 1<7>[ 320.669408@0] enter aml_set_bias_level level: 2<6>[ 320.672073@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 320.672073@0] <6>[ 320.675417@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 321.119928@0] write pen_release: 2<4>[ 321.120145@2] CPU2: Booted secondary processor<7>[ 323.219757@1] -----hotplug:2<4>[ 323.280130@1] IRQ93 no longer affine to CPU1<5>[ 323.280386@0] CPU1: shutdown<6>[ 323.680887@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 323.680887@0] <6>[ 323.681783@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 323.686489@0] IEC958 16bit<4>[ 323.689175@0] hdmitx: audio: aout notify rate 48000<4>[ 323.694097@0] hdmitx: audio: aout notify size 16<4>[ 323.694098@0] hdmitx: audio: no update<4>[ 323.694104@0] aml_i2s_close device type 8 <4>[ 325.182106@2] IRQ94 no longer affine to CPU2<5>[ 325.182353@0] CPU2: shutdown<7>[ 328.699928@0] enter aml_set_bias_level level: 2<7>[ 328.699953@0] enter aml_set_bias_level level: 2<7>[ 328.699969@0] enter aml_set_bias_level level: 1<7>[ 328.699989@0] enter aml_set_bias_level level: 2<4>[ 328.700020@0] speaker_events--mute =0<7>[ 328.700130@0] enter aml_set_bias_level level: 1<7>[ 328.700148@0] enter aml_set_bias_level level: 1<7>[ 328.852751@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 328.852955@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 328.854229@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 328.859669@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 328.867437@0] iec958 mode PCM16<4>[ 328.869471@0] IEC958 16bit<4>[ 328.872427@0] hdmitx: audio: aout notify rate 48000<4>[ 328.877005@0] hdmitx: audio: aout notify size 16<4>[ 328.881727@0] hdmitx: audio: no update<6>[ 328.885332@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 328.891872@0] enter aml_set_bias_level level: 2<7>[ 328.891886@0] enter aml_set_bias_level level: 2<7>[ 328.891917@0] enter aml_set_bias_level level: 1<7>[ 328.891924@0] enter aml_set_bias_level level: 2<4>[ 328.891946@0] speaker_events--mute =1<7>[ 328.899842@0] enter aml_set_bias_level level: 3<7>[ 328.899859@0] enter aml_set_bias_level level: 3<6>[ 328.900505@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 328.900505@0] <6>[ 328.901435@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 330.529859@0] write pen_release: 1<4>[ 330.530003@1] CPU1: Booted secondary processor<6>[ 333.208337@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 333.208337@0] <6>[ 333.208341@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 333.208361@0] IEC958 16bit<4>[ 333.208373@0] hdmitx: audio: aout notify rate 48000<4>[ 333.208375@0] hdmitx: audio: aout notify size 16<4>[ 333.208377@0] hdmitx: audio: no update<4>[ 333.208381@0] aml_i2s_close device type 8 <7>[ 334.755311@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 334.756083@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 334.757388@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 334.763419@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 334.769657@0] iec958 mode PCM16<4>[ 334.773059@0] IEC958 16bit<4>[ 334.775344@0] hdmitx: audio: aout notify rate 48000<4>[ 334.780953@0] hdmitx: audio: aout notify size 16<4>[ 334.784797@0] hdmitx: audio: no update<6>[ 334.788543@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 334.794806@1] enter aml_set_bias_level level: 1<7>[ 334.794818@1] enter aml_set_bias_level level: 2<6>[ 334.797851@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 334.797851@0] <6>[ 334.800969@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 339.598599@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 339.598599@0] <6>[ 339.599541@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 339.604575@0] IEC958 16bit<4>[ 339.606962@0] hdmitx: audio: aout notify rate 48000<4>[ 339.611962@0] hdmitx: audio: aout notify size 16<4>[ 339.616474@0] hdmitx: audio: no update<4>[ 339.620350@0] aml_i2s_close device type 8 <4>[ 340.382615@1] IRQ93 no longer affine to CPU1<5>[ 340.382876@0] CPU1: shutdown<4>[ 344.069744@0] function[set_tm1628_led_value] line 228 display string: 17:06 .<7>[ 344.631216@0] enter aml_set_bias_level level: 2<7>[ 344.631663@0] enter aml_set_bias_level level: 2<7>[ 344.631923@0] enter aml_set_bias_level level: 1<7>[ 344.631984@0] enter aml_set_bias_level level: 2<4>[ 344.632175@0] speaker_events--mute =0<7>[ 344.632848@0] enter aml_set_bias_level level: 1<7>[ 344.633287@0] enter aml_set_bias_level level: 1<4>[ 352.759860@0] write pen_release: 1<4>[ 352.760071@1] CPU1: Booted secondary processor<7>[ 356.157400@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 356.158423@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 356.159911@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 356.165611@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 356.172891@0] iec958 mode PCM16<4>[ 356.175030@0] IEC958 16bit<4>[ 356.178128@0] hdmitx: audio: aout notify rate 48000<4>[ 356.178138@0] hdmitx: audio: aout notify size 16<4>[ 356.178145@0] hdmitx: audio: no update<6>[ 356.178169@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 356.180316@0] enter aml_set_bias_level level: 2<7>[ 356.180397@0] enter aml_set_bias_level level: 2<7>[ 356.180499@0] enter aml_set_bias_level level: 1<7>[ 356.180512@0] enter aml_set_bias_level level: 2<4>[ 356.180614@0] speaker_events--mute =1<7>[ 356.190408@0] enter aml_set_bias_level level: 3<7>[ 356.190465@0] enter aml_set_bias_level level: 3<6>[ 356.193004@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 356.193004@0] <6>[ 356.193013@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 362.355855@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 362.355855@0] <6>[ 362.355858@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 362.355874@0] IEC958 16bit<4>[ 362.355888@0] hdmitx: audio: aout notify rate 48000<4>[ 362.355890@0] hdmitx: audio: aout notify size 16<4>[ 362.355893@0] hdmitx: audio: no update<4>[ 362.355900@0] aml_i2s_close device type 8 <7>[ 363.995854@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 363.996052@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 363.996058@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 363.996062@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 363.996066@0] iec958 mode PCM16<4>[ 363.996071@0] IEC958 16bit<4>[ 363.996076@0] hdmitx: audio: aout notify rate 48000<4>[ 363.996078@0] hdmitx: audio: aout notify size 16<4>[ 363.996080@0] hdmitx: audio: no update<6>[ 363.996083@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 363.996239@0] enter aml_set_bias_level level: 1<7>[ 363.996242@0] enter aml_set_bias_level level: 2<6>[ 363.996807@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 363.996807@0] <6>[ 363.996809@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 368.619975@0] write pen_release: 2<4>[ 368.620231@2] CPU2: Booted secondary processor<6>[ 368.922231@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 368.922231@0] <6>[ 368.922233@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 368.922245@0] IEC958 16bit<4>[ 368.922253@0] hdmitx: audio: aout notify rate 48000<4>[ 368.922255@0] hdmitx: audio: aout notify size 16<4>[ 368.922256@0] hdmitx: audio: no update<4>[ 368.922260@0] aml_i2s_close device type 8 <4>[ 369.119866@0] write pen_release: 3<4>[ 369.120087@3] CPU3: Booted secondary processor<7>[ 373.929941@3] enter aml_set_bias_level level: 2<7>[ 373.929945@0] enter aml_set_bias_level level: 2<7>[ 373.929952@3] enter aml_set_bias_level level: 1<7>[ 373.929953@3] enter aml_set_bias_level level: 2<4>[ 373.929962@0] speaker_events--mute =0<7>[ 373.929991@3] enter aml_set_bias_level level: 1<7>[ 373.929996@3] enter aml_set_bias_level level: 1<7>[ 375.419754@2] -----hotplug:3<4>[ 375.520092@1] IRQ93 no longer affine to CPU1<5>[ 375.520343@0] CPU1: shutdown<4>[ 375.670122@2] IRQ94 no longer affine to CPU2<5>[ 375.670388@0] CPU2: shutdown<4>[ 376.719858@0] write pen_release: 1<4>[ 376.720045@1] CPU1: Booted secondary processor<4>[ 377.119917@0] write pen_release: 2<4>[ 377.120103@2] CPU2: Booted secondary processor<7>[ 378.220541@0] -----hotplug:3<4>[ 378.281409@1] IRQ93 no longer affine to CPU1<5>[ 378.281656@0] CPU1: shutdown<4>[ 378.430074@2] IRQ94 no longer affine to CPU2<5>[ 378.430312@0] CPU2: shutdown<4>[ 381.182143@3] IRQ95 no longer affine to CPU3<5>[ 381.182372@0] CPU3: shutdown<4>[ 404.079798@0] function[set_tm1628_led_value] line 228 display string: 17:07 .<4>[ 464.089728@0] function[set_tm1628_led_value] line 228 display string: 17:08 .<7>[ 477.431287@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 477.431469@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 477.431473@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 477.431480@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 477.431484@0] iec958 mode PCM16<4>[ 477.431490@0] IEC958 16bit<4>[ 477.431495@0] hdmitx: audio: aout notify rate 48000<4>[ 477.431497@0] hdmitx: audio: aout notify size 16<4>[ 477.431505@0] hdmitx: audio: no update<6>[ 477.431508@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 477.445927@0] enter aml_set_bias_level level: 2<7>[ 477.445932@0] enter aml_set_bias_level level: 2<7>[ 477.445936@0] enter aml_set_bias_level level: 1<7>[ 477.445938@0] enter aml_set_bias_level level: 2<4>[ 477.446253@0] speaker_events--mute =1<7>[ 477.451712@0] enter aml_set_bias_level level: 3<7>[ 477.451716@0] enter aml_set_bias_level level: 3<6>[ 477.452126@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 477.452126@0] <6>[ 477.452128@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 477.829950@0] write pen_release: 1<4>[ 477.830094@1] CPU1: Booted secondary processor<6>[ 480.457684@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 480.457684@0] <6>[ 480.457688@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 480.457713@0] IEC958 16bit<4>[ 480.457726@0] hdmitx: audio: aout notify rate 48000<4>[ 480.457729@0] hdmitx: audio: aout notify size 16<4>[ 480.457732@0] hdmitx: audio: no update<4>[ 480.457738@0] aml_i2s_close device type 8 <4>[ 484.671858@1] IRQ93 no longer affine to CPU1<5>[ 484.672105@0] CPU1: shutdown<7>[ 485.460605@0] enter aml_set_bias_level level: 2<7>[ 485.461006@0] enter aml_set_bias_level level: 2<7>[ 485.461262@0] enter aml_set_bias_level level: 1<7>[ 485.461363@0] enter aml_set_bias_level level: 2<4>[ 485.461516@0] speaker_events--mute =0<7>[ 485.462216@0] enter aml_set_bias_level level: 1<7>[ 485.462622@0] enter aml_set_bias_level level: 1<7>[ 512.912177@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 512.912417@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 512.913673@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 512.919166@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 512.929560@0] iec958 mode PCM16<4>[ 512.929610@0] IEC958 16bit<4>[ 512.931697@0] hdmitx: audio: aout notify rate 48000<4>[ 512.936548@0] hdmitx: audio: aout notify size 16<4>[ 512.941109@0] hdmitx: audio: no update<6>[ 512.944792@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 512.952030@0] enter aml_set_bias_level level: 2<7>[ 512.952047@0] enter aml_set_bias_level level: 2<7>[ 512.952059@0] enter aml_set_bias_level level: 1<7>[ 512.952070@0] enter aml_set_bias_level level: 2<4>[ 512.952101@0] speaker_events--mute =1<7>[ 512.961540@0] enter aml_set_bias_level level: 3<7>[ 512.961560@0] enter aml_set_bias_level level: 3<6>[ 512.962404@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 512.962404@0] <6>[ 512.963217@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 513.369883@0] write pen_release: 1<4>[ 513.370056@1] CPU1: Booted secondary processor<6>[ 515.968865@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 515.968865@0] <6>[ 515.969808@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 515.974773@0] IEC958 16bit<4>[ 515.977246@0] hdmitx: audio: aout notify rate 48000<4>[ 515.982466@0] hdmitx: audio: aout notify size 16<4>[ 515.986700@0] hdmitx: audio: no update<4>[ 515.990636@0] aml_i2s_close device type 8 <4>[ 517.062240@1] IRQ93 no longer affine to CPU1<5>[ 517.062487@0] CPU1: shutdown<7>[ 520.999918@0] enter aml_set_bias_level level: 2<7>[ 520.999946@0] enter aml_set_bias_level level: 2<7>[ 520.999965@0] enter aml_set_bias_level level: 1<7>[ 520.999977@0] enter aml_set_bias_level level: 2<4>[ 521.000028@0] speaker_events--mute =0<7>[ 521.000155@0] enter aml_set_bias_level level: 1<7>[ 521.000175@0] enter aml_set_bias_level level: 1<4>[ 524.099728@0] function[set_tm1628_led_value] line 228 display string: 17:09 .<7>[ 530.494806@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 530.495263@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 530.496552@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 530.502153@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 530.508860@0] iec958 mode PCM16<4>[ 530.511854@0] IEC958 16bit<4>[ 530.514510@0] hdmitx: audio: aout notify rate 48000<4>[ 530.519523@0] hdmitx: audio: aout notify size 16<4>[ 530.524083@0] hdmitx: audio: no update<6>[ 530.527685@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 530.537927@0] enter aml_set_bias_level level: 2<7>[ 530.537944@0] enter aml_set_bias_level level: 2<7>[ 530.537955@0] enter aml_set_bias_level level: 1<7>[ 530.537961@0] enter aml_set_bias_level level: 2<4>[ 530.538115@0] speaker_events--mute =1<7>[ 530.539903@0] enter aml_set_bias_level level: 3<7>[ 530.539938@0] enter aml_set_bias_level level: 3<6>[ 530.540591@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 530.540591@0] <6>[ 530.543748@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 531.029847@0] write pen_release: 1<4>[ 531.029993@1] CPU1: Booted secondary processor<11>[ 531.456502@0] init: untracked pid 3538 exited with status 0<4>[ 533.319880@0] write pen_release: 2<4>[ 533.320064@2] CPU2: Booted secondary processor<11>[ 533.486156@0] init: untracked pid 3601 exited with status 2<11>[ 533.700082@0] init: untracked pid 3605 exited with status 0<7>[ 534.219787@1] -----hotplug:2<4>[ 534.301221@1] IRQ93 no longer affine to CPU1<5>[ 534.301481@0] CPU1: shutdown<6>[ 535.682493@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 535.682493@0] <6>[ 535.683387@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 535.688102@0] IEC958 16bit<4>[ 535.691754@0] hdmitx: audio: aout notify rate 48000<4>[ 535.691759@0] hdmitx: audio: aout notify size 16<4>[ 535.691762@0] hdmitx: audio: no update<4>[ 535.691772@0] aml_i2s_close device type 8 <7>[ 536.274077@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 536.275266@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 536.276592@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 536.283484@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 536.290452@0] iec958 mode PCM16<4>[ 536.291871@0] IEC958 16bit<4>[ 536.294783@0] hdmitx: audio: aout notify rate 48000<4>[ 536.300021@0] hdmitx: audio: aout notify size 16<4>[ 536.304018@0] hdmitx: audio: no update<6>[ 536.307780@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 536.315808@2] enter aml_set_bias_level level: 1<7>[ 536.315860@2] enter aml_set_bias_level level: 2<6>[ 536.320193@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 536.320193@0] <6>[ 536.321064@0] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 540.243918@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 540.243918@0] <6>[ 540.243922@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 540.243937@0] IEC958 16bit<4>[ 540.243945@0] hdmitx: audio: aout notify rate 48000<4>[ 540.243948@0] hdmitx: audio: aout notify size 16<4>[ 540.243950@0] hdmitx: audio: no update<4>[ 540.243957@0] aml_i2s_close device type 8 <7>[ 542.019467@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 542.021294@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 542.022550@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 542.028018@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 542.034876@0] iec958 mode PCM16<4>[ 542.037809@0] IEC958 16bit<4>[ 542.040564@0] hdmitx: audio: aout notify rate 48000<4>[ 542.045371@0] hdmitx: audio: aout notify size 16<4>[ 542.050043@0] hdmitx: audio: no update<6>[ 542.053673@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 542.059830@2] enter aml_set_bias_level level: 1<7>[ 542.059841@2] enter aml_set_bias_level level: 2<6>[ 542.060587@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 542.060587@0] <6>[ 542.066132@0] [aml-i2s-dai]audio_hw_958_enable 1
Comments