RobertBerger icon

regor-1-boot

RobertBerger | PRO | 02/01/23 12:03:27 PM UTC | 0 ⭐ | 783 👁️ | Never ⏰ | []
text |

20.38 KB

|

None

|

0 👍

/

0 👎

U-Boot SPL 2021.01-mainline-student-v2021.01 (Jan 24 2023 - 17:15:28 +0000)
Trying to boot from MMC1
  U-Boot 2022.10 (Oct 03 2022 - 19:25:32 +0000)
 CPU  : AM335X-GP rev 2.1
Model: Phytec AM335x phyBOARD-REGOR
DRAM:  512 MiB
ti_sysc target-module@9000: failed to get fck clock
ti_sysc target-module@9000: failed to release all clocks
Core:  85 devices, 14 uclasses, devicetree: separate
NAND:  512 MiB
MMC:   ti_sysc target-module@7000: failed to get fck clock
ti_sysc target-module@7000: failed to release all clocks
OMAP SD/MMC: 0
Loading Environment from FAT... OK
No USB device found
Net:   eth2: ethernet@4a100000
Hit any key to stop autoboot:  0 
bootfile: /boot/uImage
fdtfile: /boot/am335x-regor-rdk.dtb
ext4load mmc 0:2 0x80300000 /boot/uImage
12157504 bytes read in 764 ms (15.2 MiB/s)
ext4load mmc 0:2 0x815f0000 /boot/am335x-regor-rdk.dtb
68142 bytes read in 7 ms (9.3 MiB/s)
Booting from mmc - uEnv.txt from ext4...
bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait noinitrd nohlt panic=1
## Booting kernel from Legacy Image at 80300000 ...
   Image Name:   Linux-6.1.1-std
   Image Type:   ARM Linux Kernel Image (no loading done) (uncompressed)
   Data Size:    12157440 Bytes = 11.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 815f0000
   Booting using the fdt blob at 0x815f0000
   XIP Kernel Image (no loading done)
   Loading Device Tree to 8ffec000, end 8ffffa2d ... OK
 Starting kernel ...
 [    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.1.1-std (oe-user@oe-host) (arm-resy-linux-gnueabi-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP Wed Dec 21 16:48:12 UTC 2022
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Phytec AM335x phyBOARD-REGOR
[    0.000000] Memory policy: Data cache writeback
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0x9b800000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x000000009fdfffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x000000009fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff]
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (neon)
[    0.000000] percpu: Embedded 17 pages/cpu s38676 r8192 d22764 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129412
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait noinitrd nohlt panic=1
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 421436K/522240K available (17408K kernel code, 2678K rwdata, 6464K rodata, 2048K init, 465K bss, 35268K reserved, 65536K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 61015 entries in 179 pages
[    0.000000] ftrace: allocated 179 pages with 5 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000
[    0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[    0.000026] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.001029] TI gptimer clockevent: 25000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000
[    0.005565] Console: colour dummy device 80x30
[    0.005643] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[    0.091137] pid_max: default: 32768 minimum: 301
[    0.091403] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.091423] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.092534] CPU: Testing write buffer coherency: ok
[    0.092609] CPU0: Spectre v2: using BPIALL workaround
[    0.093054] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.094201] cblist_init_generic: Setting adjustable number of callback queues.
[    0.094218] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.094358] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.094534] Setting up static identity map for 0x80300000 - 0x803000ac
[    0.097031] rcu: Hierarchical SRCU implementation.
[    0.097045] rcu:     Max phase no-delay instances is 1000.
[    0.102564] EFI services will not be available.
[    0.102938] smp: Bringing up secondary CPUs ...
[    0.102950] smp: Brought up 1 node, 1 CPU
[    0.102962] SMP: Total of 1 processors activated (996.14 BogoMIPS).
[    0.102975] CPU: All CPU(s) started in SVC mode.
[    0.103811] devtmpfs: initialized
[    0.117131] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.117430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.117463] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.124298] pinctrl core: initialized pinctrl subsystem
[    0.129221] DMI not present or invalid.
[    0.130178] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.133444] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.136774] thermal_sys: Registered thermal governor 'step_wise'
[    0.136949] cpuidle: using governor menu
[    0.161925] No ATAGs?
[    0.161946] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.167654] Serial: AMBA PL011 UART driver
[    0.179682] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    1.771139] raid6: neonx8   gen()   450 MB/s
[    1.941109] raid6: neonx4   gen()  1976 MB/s
[    2.111102] raid6: neonx2   gen()  1917 MB/s
[    2.281115] raid6: neonx1   gen()  1558 MB/s
[    2.451134] raid6: int32x8  gen()   334 MB/s
[    2.621120] raid6: int32x4  gen()   382 MB/s
[    2.791148] raid6: int32x2  gen()   496 MB/s
[    2.961160] raid6: int32x1  gen()   380 MB/s
[    2.961168] raid6: using algorithm neonx4 gen() 1976 MB/s
[    3.131111] raid6: .... xor() 1274 MB/s, rmw enabled
[    3.131119] raid6: using neon recovery algorithm
[    3.136517] iommu: Default domain type: Translated
[    3.136536] iommu: DMA domain TLB invalidation policy: strict mode
[    3.137357] SCSI subsystem initialized
[    3.138732] usbcore: registered new interface driver usbfs
[    3.138797] usbcore: registered new interface driver hub
[    3.138860] usbcore: registered new device driver usb
[    3.139917] pps_core: LinuxPPS API ver. 1 registered
[    3.139928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    3.139951] PTP clock support registered
[    3.140122] EDAC MC: Ver: 3.0.0
[    3.143366] vgaarb: loaded
[    3.144056] clocksource: Switched to clocksource dmtimer
[    3.250147] NET: Registered PF_INET protocol family
[    3.250471] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    3.251645] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    3.251689] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    3.251707] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    3.251752] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    3.251852] TCP: Hash tables configured (established 4096 bind 4096)
[    3.251983] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.252010] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.252189] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    3.253211] RPC: Registered named UNIX socket transport module.
[    3.253230] RPC: Registered udp transport module.
[    3.253236] RPC: Registered tcp transport module.
[    3.253241] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.253255] PCI: CLS 0 bytes, default 64
[    3.255077] Initialise system trusted keyrings
[    3.255878] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    3.264297] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.265365] NFS: Registering the id_resolver key type
[    3.265432] Key type id_resolver registered
[    3.265439] Key type id_legacy registered
[    3.265550] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.265562] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    3.265603] ntfs: driver 2.1.32 [Flags: R/O].
[    3.266527] xor: measuring software checksum speed
[    3.274397]    arm4regs        :  1277 MB/sec
[    3.283356]    8regs           :  1099 MB/sec
[    3.292338]    32regs          :  1099 MB/sec
[    3.297662]    neon            :  1857 MB/sec
[    3.297671] xor: using function: neon (1857 MB/sec)
[    3.297690] Key type asymmetric registered
[    3.297698] Asymmetric key parser 'x509' registered
[    3.297910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    3.298263] io scheduler mq-deadline registered
[    3.298277] io scheduler kyber registered
[    3.388749] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[    3.393180] SuperH (H)SCI(F) driver initialized
[    3.393820] msm_serial: driver initialized
[    3.393829] STMicroelectronics ASC driver initialized
[    3.395432] STM32 USART driver initialized
[    3.413862] brd: module loaded
[    3.421610] loop: module loaded
[    3.432553] CAN device driver interface
[    3.433274] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    3.433915] e1000e: Intel(R) PRO/1000 Network Driver
[    3.433921] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.434148] igb: Intel(R) Gigabit Ethernet Network Driver
[    3.434158] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.437081] pegasus: Pegasus/Pegasus II USB Ethernet driver
[    3.437155] usbcore: registered new interface driver pegasus
[    3.437210] usbcore: registered new interface driver asix
[    3.437248] usbcore: registered new interface driver ax88179_178a
[    3.437300] usbcore: registered new interface driver cdc_ether
[    3.437353] usbcore: registered new interface driver smsc75xx
[    3.437401] usbcore: registered new interface driver smsc95xx
[    3.437437] usbcore: registered new interface driver net1080
[    3.437472] usbcore: registered new interface driver cdc_subset
[    3.437508] usbcore: registered new interface driver zaurus
[    3.437616] usbcore: registered new interface driver cdc_ncm
[    3.440933] usbcore: registered new interface driver usb-storage
[    3.445285] i2c_dev: i2c /dev entries driver
[    3.458253] cpuidle: enable-method property 'ti,am3352' found operations
[    3.460292] sdhci: Secure Digital Host Controller Interface driver
[    3.460308] sdhci: Copyright(c) Pierre Ossman
[    3.461669] Synopsys Designware Multimedia Card Interface Driver
[    3.462882] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.465406] ledtrig-cpu: registered to indicate activity on CPUs
[    3.467812] usbcore: registered new interface driver usbhid
[    3.467831] usbhid: USB HID core driver
[    3.475045] NET: Registered PF_INET6 protocol family
[    3.476888] Segment Routing with IPv6
[    3.476959] In-situ OAM (IOAM) with IPv6
[    3.477049] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.477908] NET: Registered PF_PACKET protocol family
[    3.477924] can: controller area network core
[    3.478020] NET: Registered PF_CAN protocol family
[    3.478030] can: raw protocol
[    3.478040] can: broadcast manager protocol
[    3.478053] can: netlink gateway - max_hops=1
[    3.478765] Key type dns_resolver registered
[    3.478958] ThumbEE CPU extension supported.
[    3.478981] Registering SWP/SWPB emulation handler
[    3.479423] omap_voltage_late_init: Voltage driver support not added
[    3.481893] Loading compiled-in X.509 certificates
[    3.486700] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    3.543292] pinctrl-single 44e10800.pinmux: 142 pins, size 568
[    3.560765] ti-sysc: probe of 44e31000.target-module failed with error -16
[    3.589746] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 18, base_baud = 3000000) is a 8250
[    3.597049] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 19, base_baud = 3000000) is a 8250
[    3.610749] ti-sysc: probe of 48040000.target-module failed with error -16
[    3.647919] gpio gpiochip0: (gpio-0-31): not an immutable chip, please consider fixing it!
[    3.648969] OMAP GPIO hardware version 0.1
[    3.684997] gpio gpiochip1: (gpio-32-63): not an immutable chip, please consider fixing it!
[    3.693289] gpio gpiochip2: (gpio-64-95): not an immutable chip, please consider fixing it!
[    3.722032] omap_rng 48310000.rng: Random Number Generator ver. 20
[    3.740679] random: crng init done
[    3.794060] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
[    3.798311] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.798338] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver SMSC LAN8710/LAN8720
[    3.799009] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4
[    3.799026] cpsw-switch 4a100000.switch: ALE Table size 1024
[    3.799141] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies)
[    3.799156] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec
[    3.799262] cpsw-switch 4a100000.switch: Detected MACID = f8:36:9b:10:e0:80
[    3.799328] cpsw-switch 4a100000.switch: Detected MACID = f8:36:9b:10:e0:82
[    3.802011] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0)
[    3.814992] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!
[    3.815038] edma 49000000.dma: TI EDMA DMA engine driver
[    3.860884] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    3.860918] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    3.888137] omap_reset_deassert: timedout waiting for gfx:0
[    3.888199] ti-sysc: probe of 5600fe00.target-module failed with error -110
[    3.896762] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    3.903597] gpio gpiochip4: (gpio-96-127): not an immutable chip, please consider fixing it!
[    3.908821] l3-aon-clkctrl:0000:0: failed to disable
[    3.913612] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 37, base_baud = 3000000) is a 8250
[    5.162024] printk: console [ttyS0] enabled
[    5.194305] tps65910 0-002d: No interrupt support, no core IRQ
[    5.230079] tps65910-rtc tps65910-rtc: registered as rtc0
[    5.237897] tps65910-rtc tps65910-rtc: setting system clock to 2023-02-01T12:59:24 UTC (1675256364)
[    5.249135] at24 0-0052: supply vcc not found, using dummy regulator
[    5.256410] at24 0-0052: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[    5.263869] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    5.274283] spi-nor spi0.0: mx25l6405d (8192 Kbytes)
[    5.292644] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
[    5.301599] sdhci-omap 48060000.mmc: Got CD GPIO
[    5.306535] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator
[    5.314602] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
[    5.321004] nand: Micron MT29F4G08ABADAH4
[    5.325099] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    5.332808] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    5.338358] 3 fixed-partitions partitions found on MTD device omap2-nand.0
[    5.345310] Creating 3 MTD partitions on "omap2-nand.0":
[    5.350653] 0x000000000000-0x000000020000 : "NAND.SPL"
[    5.356141] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator
[    5.392092] 0x000000020000-0x000000120000 : "NAND.u-boot"
[    5.425606] 0x000000120000-0x000020000000 : "NAND.UBI"
[    5.484239] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA
[    5.527622] mmc0: new high speed SDHC card at address 59b4
[    5.544613] mmcblk0: mmc0:59b4 USDU1 29.4 GiB
[    5.551795]  mmcblk0: p1 p2 p3
[    5.727882] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: disabled.
[    5.737062] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    5.744106] devtmpfs: mounted
[    5.764660] Freeing unused kernel image (initmem) memory: 2048K
[    5.771570] Run /sbin/init as init process
INIT: version 3.04 booting
Starting udev
[    6.482070] udevd[116]: starting version 3.2.11
[    6.555811] udevd[117]: starting eudev-3.2.11
[    7.288704] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator
[    7.297635] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests
[    7.562233] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator
[    7.571248] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests
[    7.590396] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
[    7.595933] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
[    7.853312] hub 1-0:1.0: USB hub found
[    7.924238] hub 1-0:1.0: 1 port detected
[    7.995135] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[    8.000538] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2
[    8.186729] hub 2-0:1.0: USB hub found
[    8.202808] hub 2-0:1.0: 1 port detected
[    8.236561] BTRFS: device label cntdata devid 1 transid 6 /dev/mmcblk0p3 scanned by udevd (120)
[    8.502989] mtdblock: MTD device 'NAND.u-boot' is NAND, please consider using UBI block devices instead.
[    8.514891] mtdblock: MTD device 'NAND.UBI' is NAND, please consider using UBI block devices instead.
[    8.559244] mtdblock: MTD device 'NAND.SPL' is NAND, please consider using UBI block devices instead.
[    9.782506] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: disabled.
INIT: Entering runlevel: 3
Configuring network interfaces... [   10.980859] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac
[   11.075146] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
udhcpc: started, v1.35.0
udhcpc: broadcasting discover
[   13.204746] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off
[   13.213144] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
udhcpc: broadcasting discover
udhcpc: broadcasting discover
udhcpc: broadcasting select for 192.168.42.200, server 192.168.42.254
udhcpc: lease of 192.168.42.200 obtained from 192.168.42.254, lease time 7200
/etc/udhcpc.d/50default: Adding DNS 192.168.42.254
done.
Starting Custom DNS
Starting ntpd: done
Starting syslogd/klogd: done
 Resy (Reliable Embedded Systems Reference Distro) 4.1.66 am335x-regor-rdk /dev/ttyS0
 am335x-regor-rdk login: root
root@am335x-regor-rdk:~# cat /proc/version 
Linux version 6.1.1-std (oe-user@oe-host) (arm-resy-linux-gnueabi-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP Wed Dec 21 16:48:12 UTC 2022
root@am335x-regor-rdk:~# lsmod
Module                  Size  Used by
musb_dsps              20480  0
musb_hdrc             126976  1 musb_dsps
phy_am335x             16384  2
cppi41                 20480  60
phy_am335x_control     16384  1 phy_am335x
root@am335x-regor-rdk:~# cat /etc/issue
Resy (Reliable Embedded Systems Reference Distro) 4.1.66 \n \l
 

Comments