Pasted

#alerts			# Receive and display P2P network alerts (default: 0) 
#alertnotify=<cmd>	# Execute command when a relevant alert is received or we see a really 
#blocknotify=<cmd>	# Execute command when the best block changes (%s in cmd is replaced by 
#checkblocks=<n>	# How many blocks to check at startup (default: 288, 0 = all) 
#checklevel=<n>		# How thorough the block verification of -checkblocks is (0-4, default: 3) 
#conf=<file>		# Specify configuration file (default: bitcoin.conf) 
#daemon			# Run in the background as a daemon and accept commands 
#datadir=<dir>		# Specify data directory 
#dbcache=<n>		# Set database cache size in megabytes (4 to 16384, default: 100) 
#loadblock=<file>	# Imports blocks from external blk000??.dat file on startup 
#maxorphantx=<n>	# Keep at most <n> unconnectable transactions in memory (default: 100) 
#maxmempool=<n>		# Keep the transaction memory pool below <n> megabytes (default: 300) 
#mempoolexpiry=<n>	# Do not keep transactions in the mempool longer than <n> hours (default: 
#par=<n>		# Set the number of script verification threads (-2 to 16, 0 = auto, <0 = 
#pid=<file>		# Specify pid file (default: bitcoind.pid) 
#prune=<n>		# Reduce storage requirements by pruning (deleting) old blocks. This mode 
#reindex		# Rebuild block chain index from current blk000??.dat files on startup 
#sysperms		# Create new files with system default permissions, instead of umask 077 
#txindex		# Maintain a full transaction index, used by the getrawtransaction rpc 
#addnode=<ip>		# Add a node to connect to and attempt to keep the connection open 
#banscore=<n>		# Threshold for disconnecting misbehaving peers (default: 100) 
#bantime=<n>		# Number of seconds to keep misbehaving peers from reconnecting (default: 
#bind=<addr>		# Bind to given address and always listen on it. Use [host]:port notation 
#connect=<ip>		# Connect only to the specified node(s) 
#discover		# Discover own IP addresses (default: 1 when listening and no -externalip 
#dns			# Allow DNS lookups for -addnode, -seednode and -connect (default: 1) 
#dnsseed		# Query for peer addresses via DNS lookup, if low on addresses (default: 1 
#externalip=<ip>	# Specify your own public address 
#forcednsseed		# Always query for peer addresses via DNS lookup (default: 0) 
#listen			# Accept connections from outside (default: 1 if no -proxy or -connect) 
#listenonion		# Automatically create Tor hidden service (default: 1) 
#maxconnections=<n>	# Maintain at most <n> connections to peers (default: 125) 
#maxreceivebuffer=<n>	# Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000) 
#maxsendbuffer=<n>	# Maximum per-connection send buffer, <n>*1000 bytes (default: 1000) 
#onion=<ip:port>	# Use separate SOCKS5 proxy to reach peers via Tor hidden services 
#onlynet=<net>		# Only connect to nodes in network <net> (ipv4, ipv6 or onion) 
#permitbaremultisig	# Relay non-P2SH multisig (default: 1) 
#peerbloomfilters	# Support filtering of blocks and transaction with bloom filters (default: 
#port=<port>		# Listen for connections on <port> (default: 8333 or testnet: 18333) 
#proxy=<ip:port>	# Connect through SOCKS5 proxy 
#proxyrandomize		# Randomize credentials for every proxy connection. This enables Tor 
#seednode=<ip>		# Connect to a node to retrieve peer addresses, and disconnect 
#timeout=<n>		# Specify connection timeout in milliseconds (minimum: 1, default: 5000) 
#torcontrol=<ip>:<port>	# Tor control port to use if onion listening enabled (default: 
#torpassword=<pass>	# Tor control port password (default: empty) 
#whitebind=<addr>	# Bind to given address and whitelist peers connecting to it. Use 
#whitelist=<netmask>	# Whitelist peers connecting from the given netmask or IP address. Can be 
#whitelistrelay		# Accept relayed transactions received from whitelisted peers even when 
#whitelistforcerelay	# Force relay of transactions from whitelisted peers even they violate 
#maxuploadtarget=<n>	# Tries to keep outbound traffic under the given target (in MiB per 24h), 
#disablewallet		# Do not load the wallet and disable wallet RPC calls 
#keypool=<n>		# Set key pool size to <n> (default: 100) 
#fallbackfee=<amt>	# A fee rate (in BTC/kB) that will be used when fee estimation has 
#mintxfee=<amt>		# Fees (in BTC/kB) smaller than this are considered zero fee for 
#paytxfee=<amt>		# Fee (in BTC/kB) to add to transactions you send (default: 0.00) 
#rescan			# Rescan the block chain for missing wallet transactions on startup 
#salvagewallet		# Attempt to recover private keys from a corrupt wallet.dat on startup 
#sendfreetransactions	# Send transactions as zero-fee transactions if possible (default: 0) 
#spendzeroconfchange	# Spend unconfirmed change when sending transactions (default: 1) 
#txconfirmtarget=<n>	# If paytxfee is not set, include enough fee so transactions begin 
#maxtxfee=<amt>		# Maximum total fees (in BTC) to use in a single wallet transaction; 
#upgradewallet		# Upgrade wallet to latest format on startup 
#wallet=<file>		# Specify wallet file (within data directory) (default: wallet.dat) 
#walletbroadcast	# Make the wallet broadcast transactions (default: 1) 
#walletnotify=<cmd>	# Execute command when a wallet transaction changes (%s in cmd is replaced 
#zapwallettxes=<mode>	# Delete all wallet transactions and only recover those parts of the 
#uacomment=<cmt>	# Append comment to the user agent string 
#debug=<category>	# Output debugging information (default: 0, supplying <category> is 
#gen			# Generate coins (default: 0) 
#genproclimit=<n>	# Set the number of threads for coin generation if enabled (-1 = all 
#logips			# Include IP addresses in debug output (default: 0) 
#logtimestamps		# Prepend debug output with timestamp (default: 1) 
#minrelaytxfee=<amt>	# Fees (in BTC/kB) smaller than this are considered zero fee for relaying, 
#printtoconsole		# Send trace/debug info to console instead of debug.log file 
#shrinkdebugfile	# Shrink debug.log file on client startup (default: 1 when no -debug) 
#testnet		# Use the test chain 
#bytespersigop		# Minimum bytes per sigop in transactions we relay and mine (default: 20) 
#datacarrier		# Relay and mine data carrier transactions (default: 1) 
#datacarriersize	# Maximum size of data in data carrier transactions we relay and mine 
#mempoolreplacement	# Enable transaction replacement in the memory pool (default: 1) 
#blockminsize=<n>	# Set minimum block size in bytes (default: 0) 
#blockmaxsize=<n>	# Set maximum block size in bytes (default: 750000) 
#blockprioritysize=<n>	# Set maximum size of high-priority/low-fee transactions in bytes 
#server			# Accept command line and JSON-RPC commands 
#rest			# Accept public REST requests (default: 0) 
#rpcbind=<addr>		# Bind to given address to listen for JSON-RPC connections. Use 
#rpccookiefile=<loc>	# Location of the auth cookie (default: data dir) 
#rpcuser=<user>		# Username for JSON-RPC connections 
#rpcpassword=<pw>	# Password for JSON-RPC connections 
#rpcauth=<userpw>	# Username and hashed password for JSON-RPC connections. The field 
#rpcport=<port>		# Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 
#rpcallowip=<ip>	# Allow JSON-RPC connections from specified source. Valid for <ip> are a 
#rpcthreads=<n>		# Set the number of threads to service RPC calls (default: 4)