Pasted

https://proxmox.com/en/downloads
 
Enabling password unlock via ssh and network
 
Dropbear SSH implementation is used within initramfs to provide the possibility to unlock the encryption of system during the boot process.
 
Let’s install dropbear and do some configuration.
 
# install dropber and add the ssh key which should be able to login to initramfs
$ apt install dropbear
...
# add your authorized_keys to the dropbear-initramfs module
# command before the key allows your to directly type the password without to invoke additional commands
$ cat <<EOF > /etc/dropbear-initramfs/authorized_keys
command="cryptroot-unlock" ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDSZhDcyw9YZagLrSKlAAa1s/YNO9X2aTUVI8A7rgWLehDASckE2IZzd3G/S7j6RXz8jZRelbO3NuGy+LBXc2aJL04+nw5yq7vwbFjkaL4bwbyZmJSasIRbZc8GduHgAT4/NCr2/+4Pvcyt14JkVquIBTlpqfMBtrCWjL1dLrfcvtpJYlxq21v5BWdTZBV0I6Bq8NtB67ly7LgcygtJe38zNuySVkaIyYu0cJ1snnKZjT6V8IdecT4kjeypAzOQZ52UVHLcYvar7FOgD5kIf9R/TStM9zgDa0OFy/XhB8Tx4KTt9wKbgp+1rjEd0yMvJJpq3Vy5QHCC1fWnAoAJ3B0/
EOF
 
Ssh host keys within initramfs and on the system itself should be the same, otherwise you will be regularly annoyed by ssh client warnings.
 
In the same time, dropbear has it’s own ssh key format which isn’t compatible to the OpenSSH of the system. Usually dropbearconvert can be used for key conversion from OpenSSH in such cases, however dropbearconvert doesn’t support the modern RFC4716 format used by OpenSSH and expects the keys to be in the PEM format. ssh-keygen supports both formats, RFC4716 and PEM, but there is no way to convert the private key between different formats with ssh-keygen. So we are going to use puttygen for RFC4716 -> PEM conversion and dropbearconvert for PEM -> DROPBEAR conversion.
 
# install puttygen
$ apt install putty-tools
...
# convert the keys from RFC4716 to PEM
$ puttygen /etc/ssh/ssh_host_rsa_key -O private-openssh -o ssh_host_rsa_key.pem
$ puttygen /etc/ssh/ssh_host_ecdsa_key -O private-openssh -o ssh_host_ecdsa_key.pem
# convert the keys from PEM to Dropbear format
$ /usr/lib/dropbear/dropbearconvert openssh dropbear ssh_host_rsa_key.pem /etc/dropbear-initramfs/dropbear_rsa_host_key
$ /usr/lib/dropbear/dropbearconvert openssh dropbear ssh_host_ecdsa_key.pem /etc/dropbear-initramfs/dropbear_ecdsa_host_key
# cleanup
$ rm ssh_host_*
 
And some final steps for encryption:
 
# rebuild the initramfs to include the keys
$ update-initramfs -u -k all
# and try it out
$ reboot
 
Install proxmox software
 
Official wiki describes the procedure pretty good, here is the summary of commands:
 
# add a proper entry to /etc/hosts
$ echo "192.168.67.68 debian" >> /etc/hosts
# add repositories
$ echo "deb http://download.proxmox.com/debian/pve buster pve-no-subscription" > /etc/apt/sources.list.d/pve-install-repo.list
$ wget http://download.proxmox.com/debian/proxmox-ve-release-6.x.gpg -O /etc/apt/trusted.gpg.d/proxmox-ve-release-6.x.gpg
$ chmod +r /etc/apt/trusted.gpg.d/proxmox-ve-release-6.x.gpg
# update the repos and upgrade the system
$ apt update && apt full-upgrade
# install proxmox
$ apt install proxmox-ve postfix open-iscsi
$ apt remove os-prober
# reboot to the new proxmox kernel
$ reboot
# cleanup
$ apt remove linux-image-amd64 'linux-image-4.19*'
$ update-grub
 
That’s it, now go to the https://youripaddress:8006 to see the proxmox interface.