Linux version 6.6.87-win2030 (builder@rockos-riscv-builder) (riscv64-linux-gnu-gcc-13 (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #2025.04.20.18.43+bb0c69aea SMP Sun Apr 20 18:58:14 UTC 2025
Machine model: Milk-V Megrez
SBI specification v2.0 detected
SBI implementation ID=0x1 Version=0x10005
SBI TIME extension detected
SBI IPI extension detected
SBI RFENCE extension detected
SBI SRST extension detected
earlycon: uart0 at MMIO32 0x0000000050900000 (options '115200n8')
printk: bootconsole [uart0] enabled
efi: UEFI not found.
Reserved memory: created CMA memory pool at 0x00000002dfc00000, size 512 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
OF: reserved mem: 0x00000002dfc00000..0x00000002ffbfffff (524288 KiB) map reusable linux,cma
OF: reserved mem: 0x0000000059000000..0x00000000593fffff (4096 KiB) nomap non-reusable sprammemory@59000000
OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) nomap non-reusable mmode_resv0@80000000
OF: reserved mem: 0x00000000dfff0000..0x00000000dfffffff (64 KiB) nomap non-reusable lpcpures@dfff0000
OF: reserved mem: 0x00000000e0000000..0x00000000e0ffffff (16384 KiB) nomap non-reusable region@e0000000
OF: reserved mem: 0x00000000fffff000..0x00000000ffffffff (4 KiB) nomap non-reusable g2d_4GB_boundary_reserved_4k
OF: reserved mem: 0x00000001fffff000..0x00000001ffffffff (4 KiB) nomap non-reusable g2d_8GB_boundary_reserved_4k
OF: reserved mem: 0x00000002fffff000..0x00000002ffffffff (4 KiB) nomap non-reusable g2d_12GB_boundary_reserved_4k
Reserved memory: created mmz_nid_0_part_0 eswin reserve memory at 0x0000000300000000, size 6144 MiB
OF: reserved mem: initialized node mmz_nid_0_part_0, compatible id eswin-reserve-memory
OF: reserved mem: 0x0000000300000000..0x000000047fffffff (6291456 KiB) nomap non-reusable mmz_nid_0_part_0
OF: reserved mem: 0x0000001000000000..0x00000010003fffff (4096 KiB) nomap non-reusable mmode_resv1@10,0
Zone ranges:
  DMA32    [mem 0x0000000059000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000087fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000059000000-0x00000000593fffff]
  node   0: [mem 0x0000000080000000-0x000000008007ffff]
  node   0: [mem 0x0000000080080000-0x00000000dffeffff]
  node   0: [mem 0x00000000dfff0000-0x00000000e0ffffff]
  node   0: [mem 0x00000000e1000000-0x00000000ffffefff]
  node   0: [mem 0x00000000fffff000-0x00000000ffffffff]
  node   0: [mem 0x0000000100000000-0x00000001ffffefff]
  node   0: [mem 0x00000001fffff000-0x00000001ffffffff]
  node   0: [mem 0x0000000200000000-0x00000002ffffefff]
  node   0: [mem 0x00000002fffff000-0x000000047fffffff]
  node   0: [mem 0x0000000480000000-0x000000087fffffff]
Initmem setup node 0 [mem 0x0000000059000000-0x000000087fffffff]
On node 0, zone DMA32: 4096 pages in unavailable ranges
On node 0, zone DMA32: 27648 pages in unavailable ranges
SBI HSM extension detected
Falling back to deprecated "riscv,isa"
riscv: base ISA extensions acdfhim
riscv: ELF capabilities acdfim
percpu: Embedded 20 pages/cpu s41976 r8192 d31752 u81920
pcpu-alloc: s41976 r8192 d31752 u81920 alloc=20*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Kernel command line: root=PARTUUID=b0f77ad6-36cd-4a99-a8c0-31d73649aa09 console=ttyS0,115200 root=PARTUUID=b0f77ad6-36cd-4a99-a8c0-31d73649aa09 rootfstype=ext4 rootwait rw earlycon selinux=0 LANG=en_US.UTF-8 panic=1 earlycon=sbi console=ttyS0,115200n8 clk_ignore_unused cma_pernuma=0x2000000 disable_bypass=false
Unknown kernel command line parameters "LANG=en_US.UTF-8 cma_pernuma=0x2000000 disable_bypass=false", will be passed to user space.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Built 1 zonelists, mobility grouping on.  Total pages: 8258544
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
Virtual kernel memory layout:
      fixmap : 0xffff8d7ffea00000 - 0xffff8d7fff000000   (6144 kB)
      pci io : 0xffff8d7fff000000 - 0xffff8d8000000000   (  16 MB)
     vmemmap : 0xffff8d8000000000 - 0xffff8f8000000000   (2048 GB)
     vmalloc : 0xffff8f8000000000 - 0xffffaf8000000000   (  32 TB)
     modules : 0xffffffff01a64000 - 0xffffffff80000000   (2021 MB)
      lowmem : 0xffffaf8000000000 - 0xffffaf8827000000   (  32 GB)
      kernel : 0xffffffff80000000 - 0xffffffffffffffff   (2047 MB)
Memory: 26037764K/33558528K available (12094K kernel code, 5311K rwdata, 6144K rodata, 2206K init, 1070K bss, 6996476K reserved, 524288K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
rcu: Hierarchical RCU implementation.
rcu:    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
rcu:    RCU debug extended QS entry/exit.
        Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
riscv-intc: 64 local interrupts mapped
plic: interrupt-controller@c000000: mapped 520 interrupts with 4 handlers for 8 contexts.
riscv: providing IPIs using SBI IPI extension
rcu: srcu_init: Setting srcu_struct sizes based on contention.
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000)
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=capability,landlock,apparmor,integrity
landlock: Up and running.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
riscv: ELF compat mode unsupported
ASID allocator disabled (0 bits)
rcu: Hierarchical SRCU implementation.
rcu:    Max phase no-delay instances is 1000.
win2030_tbu_powr_priv_init finished!
power down all tbus of node 0 at start up
EFI services will not be available.
smp: Bringing up secondary CPUs ...
cpu1: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
cpu2: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
cpu3: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
smp: Brought up 1 node, 4 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.256:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor menu
cpu0: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
[eic770x_system_suspend_init 72]:
/soc/i2c@50950000/es8388-0@10: Fixed dependency cycle(s) with /soc/i2s1@50210000
/soc/i2s0@50200000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
/soc/i2s1@50210000: Fixed dependency cycle(s) with /soc/i2c@50950000/es8388-0@10
/soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
/soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/es_wb@0
/soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000
/soc/es_wb@0: Fixed dependency cycle(s) with /soc/display_control@502c0000
/soc/mipi_dsi@50270000: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000/dsi_panel@0
/soc/mipi_dsi@50270000: Fixed dependency cycle(s) with /soc/display_control@502c0000
/soc/mipi_dsi@50270000/dsi_panel@0: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000
/soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/i2s0@50200000
/soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/display_control@502c0000
/soc/csidma@0x52048000: Fixed dependency cycle(s) with /soc/csi2@51050000
/soc/csi2@51050000: Fixed dependency cycle(s) with /soc/csidma@0x52048000
/soc/i2c@50950000/es8388-0@10: Fixed dependency cycle(s) with /soc/i2s1@50210000
eswin-pinctrl 51600080.pinctrl: eswin pinctrl initialized
/soc/i2s0@50200000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
/soc/i2c@50950000/es8388-0@10: Fixed dependency cycle(s) with /soc/i2s1@50210000
/soc/i2s1@50210000: Fixed dependency cycle(s) with /soc/i2c@50950000/es8388-0@10
/soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
/soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/es_wb@0
/soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000
/soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/es_wb@0
/soc/es_wb@0: Fixed dependency cycle(s) with /soc/display_control@502c0000
/soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000
/soc/mipi_dsi@50270000: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000/dsi_panel@0
/soc/mipi_dsi@50270000: Fixed dependency cycle(s) with /soc/display_control@502c0000
/soc/mipi_dsi@50270000/dsi_panel@0: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000
/soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
/soc/i2s0@50200000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
/soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/i2s0@50200000
/soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/display_control@502c0000
/soc/csidma@0x52048000: Fixed dependency cycle(s) with /soc/csi2@51050000
/soc/csidma@0x52048000: Fixed dependency cycle(s) with /soc/csi2@51050000
/soc/csi2@51050000: Fixed dependency cycle(s) with /soc/csidma@0x52048000
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
vgaarb: loaded
clocksource: Switched to clocksource riscv_clocksource
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 7, 524288 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 8, 1572864 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NET: Registered PF_XDP protocol family
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=23 bucket_order=0
zbud: loaded
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
eswin-clock 51828000.sys-crg:clock-controller: failed to get cpu volatge gpio
eswin-clock 51828000.sys-crg:clock-controller: cpu-default-frequency not set
CCACHE: zero_device resource: start 0x1a000000, size 0x400000
CCACHE: 4 banks, 16 ways, sets/bank=1024, bytes/block=64
CCACHE: Node 0, index of the largest way enabled: 15
eswin-dsp-subsys 52280400.dsp_subsys: es_dsp_subsys_probe
debugfs: Directory '52280400.dsp_subsys' with parent 'regmap' already present!
ESWIN OTP debugfs initialized
eswin-pmu 51808000.power-controller: start registe power domains
eswin-pmu 51808000.power-controller: pm domain [D0_PCIE] was already in power on state.
eswin-pmu 51808000.power-controller: pm domain [D0_DSP1] was already in power on state.
eswin-pmu 51808000.power-controller: pm domain [D0_VI] was already in power on state.
eswin-pmu 51808000.power-controller: pm domain [D0_VO] was already in power on state.
eswin-pmu 51808000.power-controller: pm domain [D0_CODEC] was already in power on state.
eswin-pmu 51808000.power-controller: pm domain [D0_DSP2] was already in power on state.
eswin-pmu 51808000.power-controller: pm domain [D0_DSP3] was already in power on state.
eswin-pmu 51808000.power-controller: registered 7 power domains
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
dw-apb-uart 50900000.serial: Designware UART version
printk: console [ttyS0] disabled
50900000.serial: ttyS0 at MMIO 0x50900000 (irq = 83, base_baud = 12500000) is a 16550A
printk: console [ttyS0] enabled
printk: bootconsole [uart0] disabled
dw-apb-uart 50910000.serial: Designware UART version
50910000.serial: ttyS1 at MMIO 0x50910000 (irq = 84, base_baud = 12500000) is a 16550A
dw-apb-uart 50920000.serial: Designware UART version
50920000.serial: ttyS2 at MMIO 0x50920000 (irq = 85, base_baud = 12500000) is a 16550A
arm-smmu-v3 50c00000.iommu: ias 42-bit, oas 42-bit (features 0x00081e8f)
arm-smmu-v3 50c00000.iommu: allocated 65536 entries for cmdq
arm-smmu-v3 50c00000.iommu: allocated 32768 entries for evtq
arm-smmu-v3 50c00000.iommu: msi_domain absent - falling back to wired irqs
[drm] drm init enter
[drm] drm platform probe enter
es_drm soc:display-subsystem@0: No memory-region specified, use system cma, ret:-19
es_drm soc:display-subsystem@0: bound 502c0000.display_control (ops 0xffffffff810990c8)
dw-hdmi-eswin 502a0000.hdmi: numa_id=0
dw-hdmi-eswin 502a0000.hdmi: Detected HDMI TX controller v2.14a with HDCP (DWC HDMI 2.0 TX PHY)
dw-hdmi-eswin 502a0000.hdmi: registered DesignWare HDMI I2C bus driver
es_drm soc:display-subsystem@0: bound 502a0000.hdmi (ops 0xffffffff8109a0f0)
[drm] Initialized es_drm 1.0.0 20191101 for soc:display-subsystem@0 on minor 0
es_drm soc:display-subsystem@0: [drm] Cannot find any crtc or sizes
[drm] drm dev is on die0
[drm] drm_dev name:0
es_drm soc:display-subsystem@0: [drm] Cannot find any crtc or sizes
es_drm soc:display-subsystem@0: [drm] Cannot find any crtc or sizes
brd: module loaded
loop: module loaded
ahci 50420000.sata: Adding to iommu group 0
ahci 50420000.sata: supply ahci not found, using dummy regulator
ahci 50420000.sata: supply phy not found, using dummy regulator
ahci 50420000.sata: supply target not found, using dummy regulator
eswin_sata_sid_cfg success
ahci 50420000.sata: forcing port_map 0x0 -> 0x1
ahci 50420000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
ahci 50420000.sata: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc sadm sds apst 
scsi host0: ahci
ata1: SATA max UDMA/133 mmio [mem 0x50420000-0x5042ffff] port 0x100 irq 91
spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
spi-nor spi0.1: unrecognized JEDEC id bytes: ff ff ff ff ff ff
spi-nor spi1.0: w25q64dw (8192 Kbytes)
ata1: SATA link down (SStatus 0 SControl 300)
Freeing initrd memory: 61116K
eswin-bootspi 51800000.spi: Boot spi flash write protection enabled
eswin-bootspi 51800000.spi: ssi_max_xfer_size 32, fifo_len 256, polling mode.
win2030-eth-dwmac 50400000.ethernet: Deprecated MDIO bus assumption used
win2030-eth-dwmac 50400000.ethernet: PTP uses main clock
win2030-eth-dwmac 50400000.ethernet: can't get phyaddr (-22)
win2030-eth-dwmac 50400000.ethernet: User ID: 0x10, Synopsys ID: 0x52
win2030-eth-dwmac 50400000.ethernet:    DWMAC4/5
win2030-eth-dwmac 50400000.ethernet: DMA HW capability register supported
win2030-eth-dwmac 50400000.ethernet: RX Checksum Offload Engine supported
win2030-eth-dwmac 50400000.ethernet: TX Checksum insertion supported
win2030-eth-dwmac 50400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
win2030-eth-dwmac 50400000.ethernet: Enabled L3L4 Flow TC (entries=4)
win2030-eth-dwmac 50400000.ethernet: Enabled RFS Flow TC (entries=10)
win2030-eth-dwmac 50400000.ethernet: Using 48/48 bits DMA host/device width
RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
win2030-eth-dwmac 50410000.ethernet: Deprecated MDIO bus assumption used
win2030-eth-dwmac 50410000.ethernet: PTP uses main clock
win2030-eth-dwmac 50410000.ethernet: can't get phyaddr (-22)
win2030-eth-dwmac 50410000.ethernet: User ID: 0x10, Synopsys ID: 0x52
win2030-eth-dwmac 50410000.ethernet:    DWMAC4/5
win2030-eth-dwmac 50410000.ethernet: DMA HW capability register supported
win2030-eth-dwmac 50410000.ethernet: RX Checksum Offload Engine supported
win2030-eth-dwmac 50410000.ethernet: TX Checksum insertion supported
win2030-eth-dwmac 50410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
win2030-eth-dwmac 50410000.ethernet: device MAC address 2e:67:70:2a:f7:ab
win2030-eth-dwmac 50410000.ethernet: Enabled L3L4 Flow TC (entries=4)
win2030-eth-dwmac 50410000.ethernet: Enabled RFS Flow TC (entries=10)
win2030-eth-dwmac 50410000.ethernet: Using 48/48 bits DMA host/device width
RTL8211F Gigabit Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
RTL8211F Gigabit Ethernet stmmac-1:01: attached PHY driver (mii_bus:phy_addr=stmmac-1:01, irq=POLL)
dwc3 50480000.dwc3: Adding to iommu group 1
dwc3 50490000.dwc3: Adding to iommu group 2
xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000008000000010
xhci-hcd xhci-hcd.4.auto: irq 95, io mem 0x50480000
xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.6.87-win2030 xhci-hcd
usb usb1: SerialNumber: xhci-hcd.4.auto
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.6.87-win2030 xhci-hcd
usb usb2: SerialNumber: xhci-hcd.4.auto
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000008000000010
xhci-hcd xhci-hcd.5.auto: irq 96, io mem 0x50490000
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.6.87-win2030 xhci-hcd
usb usb3: SerialNumber: xhci-hcd.5.auto
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.6.87-win2030 xhci-hcd
usb usb4: SerialNumber: xhci-hcd.5.auto
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver keyspan
usbserial: USB Serial support registered for Keyspan - (without firmware)
usbserial: USB Serial support registered for Keyspan 1 port adapter
usbserial: USB Serial support registered for Keyspan 2 port adapter
usb 1-1: new high-speed USB device number 2 using xhci-hcd
usbserial: USB Serial support registered for Keyspan 4 port adapter
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver oti6858
usbserial: USB Serial support registered for oti6858
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
usbcore: registered new interface driver qcserial
usbserial: USB Serial support registered for Qualcomm USB modem
usb 3-1: new high-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.c3
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB2.0 Hub             
usb 1-1: Manufacturer: VIA Labs, Inc.         
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.c3
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB2.0 Hub             
usb 3-1: Manufacturer: VIA Labs, Inc.         
usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.c3
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB3.0 Hub             
usb 2-1: Manufacturer: VIA Labs, Inc.         
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.c3
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB3.0 Hub             
usb 4-1: Manufacturer: VIA Labs, Inc.         
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
usbcore: registered new interface driver usbtest
eswin-rtc 51818000.rtc: registered as rtc0
eswin-rtc 51818000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0)
i2c_dev: i2c /dev entries driver
hwmon hwmon1: temp1_input not attached to any thermal zone
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Broadcom registered
EDAC MC: 52300000.ddr-controller init succ
EDAC MC: 52380000.ddr-controller init succ
cpu cpu0: EM: created perf domain
cpu volatge change to 900 mV, target rate 1800000000
cpuidle-riscv-sbi: idle driver registered for all CPUs
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
leds-gpio leds: Led gpio-109 renamed to gpio-109_1 due to name collision
sdhci-eswin 50450000.mmc: Adding to iommu group 3
eswin-timer 51840000.timer: eswin_timer_probe
eswin-timer 51840000.timer: eswin_timer_probe success
eswin-timer 51848000.timer: eswin_timer_probe
eswin-timer 51848000.timer: eswin_timer_probe success
eswin-timer 51850000.timer: eswin_timer_probe
eswin-timer 51850000.timer: eswin_timer_probe success
eswin-timer 51858000.timer: eswin_timer_probe
eswin-timer 51858000.timer: eswin_timer_probe success
mmc0: SDHCI controller on 50450000.mmc [50450000.mmc] using ADMA 64-bit
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
es_vdec soc:video-decoder0@50100000: Adding to iommu group 4
mmc0: Got command interrupt 0x00000001 even though no command operation was in progress.
[es_vdec:dtsp]Unable to find device eswin,video-decoder1
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00000005
mmc0: sdhci: Blk size:  0x00000000 | Blk cnt:  0x00000000
mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000000
mmc0: sdhci: Present:   0x02070000 | Host ctl: 0x00000000
mmc0: sdhci: Power:     0x00000000 | Blk gap:  0x00000000
[es_vdec:main]initializing vdec, numa id 0
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
mmc0: sdhci: Timeout:   0x00000000 | Int stat: 0x00000000
mmc0: sdhci: Int enab:  0x00ff0003 | Sig enab: 0x00ff0003
[es_vdec:main]VD set aclk to 1040000000HZ
mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps:      0x3d6ec881 | Caps_1:   0x08012367
mmc0: sdhci: Cmd:       0x00000000 | Max curr: 0x00100010
[es_vdec:main]VD set jd_clk to 800000000HZ
mmc0: sdhci: Resp[0]:   0x00000000 | Resp[1]:  0x00000000
mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
mmc0: sdhci: Host ctl2: 0x00001000
[es_vdec:main]VD set vd_clk to 800000000HZ
mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x0000000000000000
mmc0: sdhci_esw: ----------- VENDOR REGISTER DUMP -----------
[es_vdec:dtsp]mapped irq is 107
mmc0: sdhci_esw: CORE CLK: 0x00014101 | IRQ FLAG:  0x0000000200000120
mmc0: sdhci_esw: HSP ACLK: 0x80000023 | HSP CFG:  0xc0000000
mmc0: sdhci_esw: HSP STA: 0x10010101 | PWR CTRL:  0x00000001
[es_vdec:dtsp]mapped irq is 108
mmc0: sdhci: ============================================
mmc0: Got command interrupt 0x00000001 even though no command operation was in progress.
[es_vdec:subs]decoding mode = 1
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00000005
mmc0: sdhci: Blk size:  0x00000000 | Blk cnt:  0x00000000
[es_vdec:subs]core type 0
mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000000
mmc0: sdhci: Present:   0x02070000 | Host ctl: 0x00000000
mmc0: sdhci: Power:     0x00000000 | Blk gap:  0x00000000
[es_vdec:subs][0] multicorebase 0x50100800, iosize 3072
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
mmc0: sdhci: Timeout:   0x00000000 | Int stat: 0x00000000
mmc0: sdhci: Int enab:  0x00ff0003 | Sig enab: 0x00ff0003
[es_vdec:subs]core type 1
mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps:      0x3d6ec881 | Caps_1:   0x08012367
mmc0: sdhci: Cmd:       0x00000000 | Max curr: 0x00100010
[es_vdec:subs][1] multicorebase 0x50120800, iosize 3072
mmc0: sdhci: Resp[0]:   0x00000000 | Resp[1]:  0x00000000
mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
mmc0: sdhci: Host ctl2: 0x00001000
[es_vdec:main]dec/pp kernel module.
mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x0000000000000000
mmc0: sdhci_esw: ----------- VENDOR REGISTER DUMP -----------
mmc0: sdhci_esw: CORE CLK: 0x00015360 | IRQ FLAG:  0x0000000200000120
mmc0: sdhci_esw: HSP ACLK: 0x80000023 | HSP CFG:  0xc0000000
[es_vdec:main]Init multi core[0] at 0x        50100800
 core[1] at 0x        50120800
 core[2] at 0x               0
 core[3] at 0x               0
 IRQ_0=107
 IRQ_1=108
 IRQ_2=-1
 IRQ_3=-1
mmc0: sdhci_esw: HSP STA: 0x10010101 | PWR CTRL:  0x00000001
mmc0: sdhci: ============================================
[es_vdec:main]create device node-es_vdec done
mmc0: Failed to initialize a non-removable card
[es_vdec:vc]module init - vcore[0] addr =0x50100000
[es_vdec:vc]module init - vcore[1] addr =0x50120000
[es_vdec:vc]request mapped irq 107
[es_vdec:vc]request IRQ <107> successfully for subsystem 0
[es_vdec:vc]request mapped irq 108
[es_vdec:vc]request IRQ <108> successfully for subsystem 1
[es_vdec:main]module inserted. Major = 242
Eswinenc soc:video-encoder@50110000: Adding to iommu group 5
[es_venc:main][pid=1]Unable to find device eswin,video-encoder1
[es_venc:main][pid=1]initializing venc, numa id 0
[es_venc:vc][pid=1]Init: vcmd_buf_mem_pool.busAddress=0x1ffffe00000.
[es_venc:vc][pid=1]Init: vcmd_buf_mem_pool.phy_address=0x2e0d00000.
[es_venc:vc][pid=1]Init: vcmd_status_buf_mem_pool.busAddress=0x1ffffc00000.
[es_venc:vc][pid=1]Init: vcmd_status_buf_mem_pool.phy_address=0x2e0f00000.
[es_venc:vc][pid=1]Init: vcmd_registers_mem_pool.busAddress=0x1ffffa00000.
[es_venc:vc][pid=1]Init: vcmd_registers_mem_pool.phy_address=0x2e1100000.
[es_venc:vc][pid=1]module init - vcore[0] addr =0x50110000
[es_venc:vc][pid=1]module init - vcore[1] addr =0x50130000
[es_venc:vc]create device node-es_venc done
[es_venc:vc][pid=1]module inserted. Major <241>
[es_venc:vc][pid=1]link_and_run_cmdbuf, cmdbuf_id = 1, restart_cmdbuf_id = 65535
[es_venc:vc][pid=1]vcmd start completed
[es_venc:vc][pid=1]link_and_run_cmdbuf, cmdbuf_id = 2, restart_cmdbuf_id = 65535
[es_venc:vc][pid=1]vcmd start completed
[es_venc:vc][pid=101]vcmd kthread enter
base_addr:51828000,vc_aclk=0x00000021,vc_clken=0x00000000,g2d=0x00000020,vc rst=0x00000007,g2d rst=0x00000007
[es_hae warning]: power saving is disabled.
es_hae version 6.4.14.3.653784
mtlb physical: 0x8b800000
es_dewarp_init: Entering
dewarp-dri 51020000.dewarp: Adding to iommu group 6
DW set aclk to 800000000HZ
DW set vi_dig_dw to 594000000HZ
dewarp dev is on die0
es_dewarp_init: Exiting
ESWV: es media driver ver: Major 239, Minor 0 
ESWV: es_media_dev_proc_init: dec succeed, minor 0, index 0, proc ffff8f8000be5000
ESWV: init dev channel succeed, minor 1
ESWV: es_media_dev_proc_init: enc succeed, minor 2, index 1, proc ffff8f8003e15000
ESWV: init dev channel succeed, minor 3
ESWV: es_media_dev_proc_init: bms succeed, minor 4, index 2, proc ffff8f8003f95000
ESWV: es_media_dev_proc_init: vps succeed, minor 5, index 3, proc ffff8f8003fdd000
ESWV: init dev channel succeed, minor 6
ESWV: es_media_dev_proc_init: vo succeed, minor 7, index 4, proc ffff8f8008211000
ESWV: init dev channel succeed, minor 8
ESWV: es media driver insert...done!!!
debugfs: Directory '50a00000.mbox' with parent 'regmap' already present!
eswin-mailbox 50a00000.mbox: register sucessfully
debugfs: Directory '50a20000.mbox' with parent 'regmap' already present!
eswin-mailbox 50a20000.mbox: register sucessfully
debugfs: Directory '50a60000.mbox' with parent 'regmap' already present!
eswin-mailbox 50a60000.mbox: register sucessfully
__add_eswin_rsvmem_heap for mmz_nid_0_part_0 successfully!
misc mmz_vb: mmz_nid_0_part_0 was found successfully
riscv-pmu-sbi: SBI PMU extension is available
riscv-pmu-sbi: 16 firmware and 6 hardware counters
win2030-noc 52060000.d0_cfg_noc: Begin initialization
win2030-noc 52060000.d0_cfg_noc: error policy: print
win2030-noc 52060000.d0_cfg_noc: no QoS config list
win2030-noc 52060000.d0_cfg_noc: enable error logging
win2030-noc 52060000.d0_cfg_noc: Error interrupt happen!
win2030-noc 52060000.d0_cfg_noc: No NOC sniffer or NOC sniffer init failure
win2030-noc 52060000.d0_cfg_noc: ErrLog0 0x80030008
win2030-noc 52060000.d0_cfg_noc: ErrLog1 0x0000081c
win2030-noc 52060000.d0_cfg_noc: No NOC profiler or NOC profiler init failure
win2030-noc 52060000.d0_cfg_noc: ErrLog3 0x00000044
win2030-noc 52060000.d0_cfg_noc: ErrLog5 0x00000020
win2030-noc 52060000.d0_cfg_noc: timestamp: 4294893705:
        ErrorLogger0: 0x80030008
                lock: Not Locked
                OpCode: WR: data write with incrementing address
                ErrCode: SLV (error source: Target): error detected by the Slave without any information or no Error
                Len1: 3
                Format: NTTP v3.5 (Ok)
        ErrorLogger1: 0x81c
                InitFlow: snoc_cnoc/I/0
                TargetFlow: cnoc_ddrt0_ctrl/T/0
                TargetSubRange: 0
                SeqId: 1c
        AbsoluteAddress: 0x52300044
        ErrorLogger3: 0x44
                AbsoluteAddress: 0
        ErrorLogger5: 0x20
                User_flag: Prot_1

win2030-noc 52060000.d0_cfg_noc: initialization sucess
win2030-noc 52081400.d0_llc_noc: Begin initialization
win2030-noc 52081400.d0_llc_noc: error policy: print
win2030-noc 52081400.d0_llc_noc: no QoS config list
win2030-noc 52081400.d0_llc_noc: enable error logging
win2030-noc 52081400.d0_llc_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
win2030-noc 52081400.d0_llc_noc: No NOC profiler or NOC profiler init failure
win2030-noc 52081400.d0_llc_noc: initialization sucess
win2030-noc 52002c00.d0_sys_noc: Begin initialization
win2030-noc 52002c00.d0_sys_noc: error policy: print
win2030-noc 52002c00.d0_sys_noc: eswin,DSPT-qos-settings added to list(0)
win2030-noc 52002c00.d0_sys_noc: eswin,NPU-qos-settings added to list(0)
win2030-noc 52002c00.d0_sys_noc: eswin,SPISLV_TBU3-qos-settings added to list(0)
win2030-noc 52002c00.d0_sys_noc: enable error logging
win2030-noc 52002c00.d0_sys_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
win2030-noc 52002c00.d0_sys_noc: initialization sucess
win2030-noc 52021400.d0_media_noc: Begin initialization
win2030-noc 52021400.d0_media_noc: error policy: print
win2030-noc 52021400.d0_media_noc: eswin,GPU-qos-settings added to list(0)
win2030-noc 52021400.d0_media_noc: eswin,TBU2-qos-settings added to list(0)
win2030-noc 52021400.d0_media_noc: eswin,VC-qos-settings added to list(0)
win2030-noc 52021400.d0_media_noc: enable error logging
win2030-noc 52021400.d0_media_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
win2030-noc 52021400.d0_media_noc: No NOC profiler or NOC profiler init failure
win2030-noc 52021400.d0_media_noc: initialization sucess
win2030-noc 52041400.d0_realtime_noc: Begin initialization
win2030-noc 52041400.d0_realtime_noc: error policy: print
win2030-noc 52041400.d0_realtime_noc: eswin,TBU0-qos-settings added to list(0)
win2030-noc 52041400.d0_realtime_noc: eswin,VO-qos-settings added to list(0)
win2030-noc 52041400.d0_realtime_noc: enable error logging
win2030-noc 52041400.d0_realtime_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
win2030-noc 52041400.d0_realtime_noc: No NOC profiler or NOC profiler init failure
win2030-noc 52041400.d0_realtime_noc: initialization sucess
es-i2s 50200000.i2s0: dev name:i2s0
es-i2s 50200000.i2s0: nid:NUMA_NO_NODE, single DIE
es-i2s 50200000.i2s0: request dma channel[tx] failed
es-i2s 50200000.i2s0: could not register pcm: -517
es-i2s 50210000.i2s1: dev name:i2s1
es-i2s 50210000.i2s1: nid:NUMA_NO_NODE, single DIE
es-i2s 50210000.i2s1: request dma channel[tx] failed
es-i2s 50210000.i2s1: could not register pcm: -517
Initializing XFRM netlink socket
NET: Registered PF_PACKET protocol family
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
start plist test
end plist test
Loading compiled-in X.509 certificates
debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
Key type .fscrypt registered
Key type fscrypt-provisioning registered
AppArmor: AppArmor sha1 policy hashing enabled
/soc/i2s1@50210000: Fixed dependency cycle(s) with /soc/i2c@50950000/es8388-0@10
/soc/i2c@50950000/es8388-0@10: Fixed dependency cycle(s) with /soc/i2s1@50210000
es8328 1-0010: eswin platform:0
es5340 2-000f: min_uV:700000,max_uV:1100000,uV_offset:0,min_uA:20000000,max_uA:40000000,over_voltage_limits:0,1100000,0
NPU_SVCC: Operation of current configuration missing
NPU_SVCC: IC does not support requested over voltage limits
NPU_SVCC: IC does not support requested under voltage limits
NPU_SVCC: IC does not support requested temperature limits
rtc-pcf8563 5-0051: pcf8563_write_block_data: err=-121 addr=0e, data=03
rtc-pcf8563 5-0051: pcf8563_probe: write error
rtc-pcf8563: probe of 5-0051 failed with error -5
rtc-ds1307 5-0068: registered as rtc1
ina2xx 6-0045: supply vs not found, using dummy regulator
ina2xx 6-0045: error configuring the device: -121
ina2xx 6-0044: supply vs not found, using dummy regulator
ina2xx 6-0044: error configuring the device: -121
ina2xx 6-0041: supply vs not found, using dummy regulator
ina2xx 6-0041: error configuring the device: -121
ina2xx 6-0048: supply vs not found, using dummy regulator
ina2xx 6-0048: error configuring the device: -121
dwc-pwm 50818000.pwm: Runtime PM usage count underflow!
eswin-pcie 54000000.pcie: Adding to iommu group 7
eswin-pcie 54000000.pcie: host bridge /soc/pcie@0x54000000 ranges:
eswin-pcie 54000000.pcie:       IO 0x0040800000..0x0040ffffff -> 0x0040800000
eswin-pcie 54000000.pcie:      MEM 0x0041000000..0x004fffffff -> 0x0041000000
eswin-pcie 54000000.pcie:      MEM 0x8000000000..0x81ffffffff -> 0x8000000000
eswin-pcie 54000000.pcie: iATU: unroll T, 8 ob, 4 ib, align 4K, limit 8G
eswin-pcie 54000000.pcie: Phy link never came up
eswin-pcie 54000000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x7fffff] (bus address [0x40800000-0x40ffffff])
pci_bus 0000:00: root bus resource [mem 0x41000000-0x4fffffff]
pci_bus 0000:00: root bus resource [mem 0x8000000000-0x81ffffffff pref]
pci 0000:00:00.0: [1fe1:2030] type 01 class 0x060400
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x07ffffff]
pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x000fffff]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D3hot
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4fffffff]
pci 0000:00:00.0: BAR 1: assigned [mem 0x41000000-0x410fffff]
pci 0000:00:00.0: PCI bridge to [bus 01]
pcieport 0000:00:00.0: Adding to iommu group 8
pcieport 0000:00:00.0: PME: Signaling with IRQ 147
pcieport 0000:00:00.0: AER: enabled with IRQ 147
dw_axi_dmac_platform 518c0000.dma-controller-aon: Adding to iommu group 9
dw_axi_dmac_platform 518c0000.dma-controller-aon: success to config dma streamID(26) for dma-controller-aon@0x518c0000!
dw_axi_dmac_platform 518c0000.dma-controller-aon: DesignWare AXI DMA Controller, 16 channels
dw_axi_dmac_platform 50430000.dma-controller-hsp: Adding to iommu group 10
dw_axi_dmac_platform 50430000.dma-controller-hsp: DesignWare AXI DMA Controller, 12 channels
eswin_fan_control_driver 50b50000.fan_control: state.period: 100000 state.duty_cycle: 1000
eswin_fan_control_driver 50b50000.fan_control: eswin fan control init exit
win2030-ipc soc:ipc@0: stream 24 already in tree
win2030-ipc soc:ipc@0: Adding to iommu group 11
win2030-ipc soc:ipc@0: success to config dma streamID(24) for ipc@0!
win2030-ipc soc:ipc@0: success to config dma streamID(24) for ipc@0!
win2030-ipc soc:ipc@0: initialized successfully
llc_spram 51c00000.llc: llc_probe start!
llc_spram 51c00000.llc: res_spram.start=0x59000000, max_size=0x400000, configured size=0x400000
llc_spram 51c00000.llc: [0x178]=0xc0000020 [0x17c]=0x80000220 [0x180]=0x80002122 [0x184]=0x00000020 [0x418]=0x00000047
llc_spram 51c00000.llc: devm_llc_ops_register, done sucessfully!
llc_spram 51c00000.llc: SRAM pool: 4096 KiB @ vaddr 0xffff8f8011400000, phys 0x59000000
llc_spram 51c00000.llc: __add_spram_heap, Done adding spram heap name:llc_spram0
llc_spram 51c00000.llc: llc_probe Done!
es-i2s 50200000.i2s0: dev name:i2s0
es-i2s 50200000.i2s0: nid:NUMA_NO_NODE, single DIE
es-i2s 50200000.i2s0: comp1:0x24c007e, comp2:0x48c
es_audio_proc:initialized
es-i2s 50210000.i2s1: dev name:i2s1
es-i2s 50210000.i2s1: nid:NUMA_NO_NODE, single DIE
es-i2s 50210000.i2s1: comp1:0x24c007e, comp2:0x48c
debugfs: Directory '50210000.i2s1' with parent 'Analog Audio-0' already present!
debugfs: Directory '50200000.i2s0' with parent 'HDMI Audio' already present!
debugfs: File 'Playback' in directory 'dapm' already present!
eswin-sdhci-sdio 50460000.mmc: Adding to iommu group 12
cfg80211: Loading compiled-in X.509 certificates for regulatory database
eswin-sdhci-sdio 50470000.mmc: Adding to iommu group 13
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
clk: Not disabling unused clocks
cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
ALSA device list:
  #0: Analog Audio-0
mmc1: SDHCI controller on 50460000.mmc [50460000.mmc] using ADMA 64-bit
  #1: HDMI Audio
mmc2: SDHCI controller on 50470000.mmc [50470000.mmc] using ADMA 64-bit
Freeing unused kernel image (initmem) memory: 2204K
Run /init as init process
  with arguments:
    /init
  with environment:
    HOME=/
    TERM=linux
    LANG=en_US.UTF-8
    cma_pernuma=0x2000000
    disable_bypass=false
mmc2: Failed to initialize a non-removable card
mmc1: new ultra high speed SDR104 SDXC card at address d555
mmcblk1: mmc1:d555 SM256 238 GiB
 mmcblk1: p1 p2 p3
win2030-eth-dwmac 50400000.ethernet end0: renamed from eth0
win2030-eth-dwmac 50410000.ethernet end1: renamed from eth1
pvrsrvkm 51400000.gpu: EM: created perf domain
DeviceConfigCreate:471, zdbg1107 eswin print : read back aclk  800000000HZ 
eswin print DeviceConfigCreate: gpu clk enable ok
eswin print DeviceConfigCreate: gpu clk disable ok
eswin print : set aclk to 800000000HZ 
eswin print : read back aclk  800000000HZ 
eswin print DeviceConfigCreate: gpu clk enable ok
eswin print DeviceConfigCreate: gpu clk reset ok
DeviceConfigCreate: --------------->dev_name=51400000.gpu
DeviceConfigCreate: --------------->reg_base=51400000, reg_size=fffff
DeviceConfigCreate: --------------->ui32IRQ=153
PVR_K:  155: Read BVNC 30.3.408.101 from HW device registers
PVR_K:  155: RGX Device registered with BVNC 30.3.408.101
[drm] Initialized pvr 24.2.6643903 20170530 for 51400000.gpu on minor 1
EXT4-fs (mmcblk1p3): mounted filesystem 7b51c3e7-e9bd-41e5-9bac-60becb0e332d r/w with ordered data mode. Quota mode: none.
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
EXT4-fs (mmcblk1p3): re-mounted 7b51c3e7-e9bd-41e5-9bac-60becb0e332d r/w. Quota mode: none.
eswin-dsp 52280400.dsp_subsys:es_dsp@0: Adding to iommu group 14
eswin-dsp 52280400.dsp_subsys:es_dsp@0: EM: created perf domain
eswin-dsp 52280400.dsp_subsys:es_dsp@0: 

dsp hw init begin
eswin-dsp 52280400.dsp_subsys:es_dsp@0: halt device, ret 0
eswin-dsp 52280400.dsp_subsys:es_dsp@0: reset device, ret 0
eswin-dsp 52280400.dsp_subsys:es_dsp@0: release device, ret 0, val=0x0
eswin-dsp 52280400.dsp_subsys:es_dsp@1: Adding to iommu group 15
eswin-dsp 52280400.dsp_subsys:es_dsp@1: EM: created perf domain
eswin-dsp 52280400.dsp_subsys:es_dsp@1: 

dsp hw init begin
eswin-dsp 52280400.dsp_subsys:es_dsp@1: halt device, ret 0
eswin-dsp 52280400.dsp_subsys:es_dsp@1: reset device, ret 0
eswin-dsp 52280400.dsp_subsys:es_dsp@1: release device, ret 0, val=0x0
eswin-dsp 52280400.dsp_subsys:es_dsp@2: Adding to iommu group 16
eswin-dsp 52280400.dsp_subsys:es_dsp@2: EM: created perf domain
eswin-dsp 52280400.dsp_subsys:es_dsp@2: 

dsp hw init begin
eswin-dsp 52280400.dsp_subsys:es_dsp@2: halt device, ret 0
eswin-dsp 52280400.dsp_subsys:es_dsp@2: reset device, ret 0
eswin-dsp 52280400.dsp_subsys:es_dsp@2: release device, ret 0, val=0x0
eswin-dsp 52280400.dsp_subsys:es_dsp@3: Adding to iommu group 17
eswin-dsp 52280400.dsp_subsys:es_dsp@3: EM: created perf domain
eswin-dsp 52280400.dsp_subsys:es_dsp@3: 

dsp hw init begin
eswin-dsp 52280400.dsp_subsys:es_dsp@3: halt device, ret 0
eswin-dsp 52280400.dsp_subsys:es_dsp@3: reset device, ret 0
eswin-dsp 52280400.dsp_subsys:es_dsp@3: release device, ret 0, val=0x0
eswin_npu 51c00000.eswin-npu: Adding to iommu group 18
Probe Eswin NPU.
eswin_npu 51c00000.eswin-npu: EM: created perf domain
eswin_npu 51c00000.eswin-npu: Direct firmware load for eic7700_die0_e31_fw failed with error -2
[NPU][DRIVER][ERROR](npu_e31_load_fw:139) Eswin e31 request fw error.
eswin_npu 51c00000.eswin-npu: load e31 fw error.
eswin_npu: probe of 51c00000.eswin-npu failed with error -22
[NPU][DRIVER][ERROR](npu_modules_init:1071) NPU:npu_probe_result failed:-22
Probe Eswin NPU.
eswin_npu 51c00000.eswin-npu: EM: created perf domain
eswin_npu 51c00000.eswin-npu: Direct firmware load for eic7700_die0_e31_fw failed with error -2
[NPU][DRIVER][ERROR](npu_e31_load_fw:139) Eswin e31 request fw error.
eswin_npu 51c00000.eswin-npu: load e31 fw error.
eswin_npu: probe of 51c00000.eswin-npu failed with error -22
[NPU][DRIVER][ERROR](npu_modules_init:1071) NPU:npu_probe_result failed:-22
Adding 4194300k swap on /dev/mmcblk1p2.  Priority:-2 extents:1 across:4194300k SSDs
EXT4-fs (mmcblk1p1): mounted filesystem 17e0bc64-e796-4480-934a-34e6b795f91a r/w with ordered data mode. Quota mode: none.
random: crng init done
audit: type=1400 audit(1733137763.548:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=384 comm="apparmor_parser"
audit: type=1400 audit(1733137763.548:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=384 comm="apparmor_parser"
audit: type=1400 audit(1733137763.548:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=383 comm="apparmor_parser"
audit: type=1400 audit(1733137763.552:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=385 comm="apparmor_parser"
audit: type=1400 audit(1733137763.552:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=385 comm="apparmor_parser"
audit: type=1400 audit(1733137763.552:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=385 comm="apparmor_parser"
audit: type=1400 audit(1733137763.560:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=392 comm="apparmor_parser"
audit: type=1400 audit(1733137763.560:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=391 comm="apparmor_parser"
audit: type=1400 audit(1733137763.568:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=394 comm="apparmor_parser"
audit: type=1400 audit(1733137763.588:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/riscv64-linux-gnu/lightdm/lightdm-guest-session" pid=382 comm="apparmor_parser"
Probe Eswin NPU.
eswin_npu 51c00000.eswin-npu: EM: created perf domain
eswin_npu 51c00000.eswin-npu: Direct firmware load for eic7700_die0_e31_fw failed with error -2
[NPU][DRIVER][ERROR](npu_e31_load_fw:139) Eswin e31 request fw error.
eswin_npu 51c00000.eswin-npu: load e31 fw error.
eswin_npu: probe of 51c00000.eswin-npu failed with error -22
[NPU][DRIVER][ERROR](npu_modules_init:1071) NPU:npu_probe_result failed:-22
codec write reg:0, val:0x0
win2030-eth-dwmac 50400000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
win2030-eth-dwmac 50400000.ethernet end0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
dwmac4: Master AXI performs any burst length
win2030-eth-dwmac 50400000.ethernet end0: No Safety Features support found
win2030-eth-dwmac 50400000.ethernet end0: No MAC Management Counters available
win2030-eth-dwmac 50400000.ethernet end0: PTP not supported by HW
win2030-eth-dwmac 50400000.ethernet end0: configuring for phy/rgmii-txid link mode
win2030-eth-dwmac 50410000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0
win2030-eth-dwmac 50410000.ethernet end1: PHY [stmmac-1:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
dwmac4: Master AXI performs any burst length
win2030-eth-dwmac 50410000.ethernet end1: No Safety Features support found
win2030-eth-dwmac 50410000.ethernet end1: No MAC Management Counters available
win2030-eth-dwmac 50410000.ethernet end1: PTP not supported by HW
win2030-eth-dwmac 50410000.ethernet end1: configuring for phy/rgmii-txid link mode
win2030-eth-dwmac 50400000.ethernet end0: Link is Up - 1Gbps/Full - flow control rx/tx
PVR_K:  619: AXI fabric coherency (RGX_CR_SOC_AXI): 0xc
PVR_K:  619: RGX Firmware image 'rgx.fw.30.3.408.101' loaded
PVR_K:  619: Shader binary image 'rgx.sh.30.3.408.101' loaded