[gcode_macro PAUSE]
description: Lift z, go to lower left, turn off heaters (save everything)
variable_e_temp: 0
variable_b_temp: 0
rename_existing: BASE_PAUSE
gcode:
 RESPOND MSG="Target temp is {printer.extruder.target}"
 SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=e_temp VALUE={printer.extruder.target}
 SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=b_temp VALUE={printer.heater_bed.target}
 SAVE_GCODE_STATE NAME=PAUSE_state
 BASE_PAUSE
 G91
 G1 E-2 F2100
 G1 Z3 F900
 G90
 G0 X5 Y5 F6000
 G91
 TURN_OFF_HEATERS

[gcode_macro RESUME]
description: Restore from PAUSE
rename_existing: BASE_RESUME
gcode:
  ;{% set E = params.E|default(1)|float %} # edit to your preferred retract length
  M140 S{printer["gcode_macro PAUSE"].b_temp } ; Restore BED temperature and continue
  M190 S{printer["gcode_macro PAUSE"].b_temp } ; Restore BED temperature and wait
  M104 S{printer["gcode_macro PAUSE"].e_temp } ; Restore EXTRUDER temperature and continue
  M109 S{printer["gcode_macro PAUSE"].e_temp } ; Restore EXTRUDER temperature and wait
  G91 ;Incremental positioning
  G1 E5 F2100
  G90
  RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
  BASE_RESUME