/*
  JIka Cahaya  10-30% led merah akan menyala
  jika cahaya  31-60% led kuning menyala
  jika cahaya  61-90% led hijau menyala
  jika cahaya  91-100% led merah, kuning, hijay, menyala
  jika cahaya < 10% maka semua LED akan mati
*/

int LDRSensor = A0;

unsigned long previousMillis = 0;
const long interval = 1000;

void setup() {
  //Initialize Sensor (pin3) as an INPUT.
  pinMode (LDRSensor, INPUT);
  //Define baud rate for serial communication
  Serial.begin (9600);

}

void loop() {

  unsigned long currentMillis = millis();

  if (currentMillis - previousMillis >= interval) {
    previousMillis = currentMillis;
    // setelah 1detik mengerjakan program dibawah ini
    //******* START *****************************************
    int Sensordata = 1023-analogRead (LDRSensor);
    int percentageLDR = map(Sensordata, 0, 1023, 0, 100);
    if(percentageLDR) {
      
    } else if ((percentageLDR>=10)&& (percentageLDR<=30)) {
      //led merah on
      
    }
    //Print the sensor value on your serial monitor window
    Serial.print("Sensor value:");
    Serial.print(Sensordata);
    Serial.print("  Sensor Percentage:");
    Serial.print(percentageLDR);
    Serial.println("%");
   
    //******* END *************************************************
  }
}