FreeBSD/armv6 U-Boot loader, Revision 1.2 (Mon Jul 17 20:49:26 UTC 2017 root@releng3.nyi.freebsd.org) DRAM: 512MB Number of U-Boot devices: 3 U-Boot env: loaderdev not set, will probe all devices. Found U-Boot device: disk Probing all disk devices... Checking unit=0 slice= partition=... good. Booting from disk0s2a: /boot/kernel/kernel data=0x6298e8+0x1a2718 syms=[0x4+0x70380+0x4+0x9f01c] can't find 'if_run0' can't find 'wlan_mac' Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... /boot/dtb/am335x-boneblack.dtb size=0x103f9 Loaded DTB from file 'am335x-boneblack.dtb'. Kernel entry at 0x82200100... Kernel args: (null) ARM Debug Architecture not supported KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #7 r321601M: Thu Aug 17 22:13:21 PDT 2017 russellh@prescott.highfell.local:/usr/home/russellh/FreeBSD/rh-armv6/obj/arm.armv6/usr/home/russellh/FreeBSD/rh-armv6/src/sys/BEAGLEBONE-MMCCAM arm FreeBSD clang version 5.0.0 (trunk 308421) (based on LLVM 5.0.0svn) WARNING: WITNESS option enabled, expect reduced performance. VT: init without driver. CPU: ARM Cortex-A8 r3p2 (ECO: 0x00000000) CPU Features: Thumb2, Security, VMSAv7 Optional instructions: UMULL, SMULL, SIMD(ext) LoUU:2 LoC:3 LoUIS:1 Cache level 1: 32KB/64B 4-way data cache WT WB Read-Alloc 32KB/64B 4-way instruction cache Read-Alloc Cache level 2: 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc real memory = 536870912 (512 MB) avail memory = 511066112 (487 MB) Texas Instruments AM335x Processor, Revision ES2.1 arc4random: no preloaded entropy cache random: entropy device external interface kbd0 at kbdmux0 ofwbus0: simplebus0: on ofwbus0 simplebus1: on simplebus0 simplebus2: mem 0x210000-0x211fff on simplebus1 ti_scm0: mem 0-0x7ff on simplebus2 ti_aintc0: mem 0x48200000-0x48200fff on simplebus0 ti_aintc0: Revision 5.0 cpulist0: on ofwbus0 cpu0: on cpulist0 pmu0: irq 0 on ofwbus0 am335x_prcm0: mem 0x200000-0x203fff on simplebus1 am335x_prcm0: Clocks: System 24.0 MHz, CPU 1000 MHz ti_pinmux0: mem 0x800-0xa37 on simplebus2 am335x_scm0: on ti_scm0 gpio0: mem 0x44e07000-0x44e07fff irq 7 on simplebus0 gpiobus0: on gpio0 gpioc0: on gpio0 gpio1: mem 0x4804c000-0x4804cfff irq 8 on simplebus0 gpiobus1: on gpio1 gpioc1: on gpio1 gpio2: mem 0x481ac000-0x481acfff irq 9 on simplebus0 gpiobus2: on gpio2 gpioc2: on gpio2 gpio3: mem 0x481ae000-0x481aefff irq 10 on simplebus0 gpiobus3: on gpio3 gpioc3: on gpio3 ��uart0: mem 0x44e09000-0x44e0afff irq 11 on simplebus0 uart0: console (115384,n,8,1) iichb0: mem 0x44e0b000-0x44e0bfff irq 17 on simplebus0 iichb0: I2C revision 4.0 FIFO size: 32 bytes iicbus0: on iichb0 iic0: on iicbus0 am335x_pmic0: at addr 0x48 irq 54 on iicbus0 iicbus0: at addr 0xa0 tda0 at addr 0xe0 on iicbus0 iichb1: mem 0x4819c000-0x4819cfff irq 19 on simplebus0 iichb1: I2C revision 4.0 FIFO size: 32 bytes iicbus1: on iichb1 iic1: on iicbus1 iicbus1: at addr 0xa8 iicbus1: at addr 0xaa iicbus1: at addr 0xac iicbus1: at addr 0xae sdhci_ti0: mem 0x48060000-0x48060fff irq 20 on simplebus0 sdhci_ti0: Custom-disabling 8-bit bus mmc_alloc_device() sdhci_ti1: mem 0x481d8000-0x481d8fff irq 21 on simplebus0 sdhci_ti1: Custom-disabling 8-bit bus mmc_alloc_device() ti_wdt0: mem 0x44e35000-0x44e35fff irq 23 on simplebus0 ti_mbox0: mem 0x480c8000-0x480c81ff irq 26 on simplebus0 ti_mbox0: revision 4.0 am335x_dmtimer0: mem 0x48040000-0x480403ff irq 28 on simplebus0 Event timer "DMTimer2" frequency 24000000 Hz quality 500 am335x_dmtimer1: mem 0x48042000-0x480423ff irq 29 on simplebus0 Timecounter "DMTimer3" frequency 24000000 Hz quality 500 am335x_rtc0: mem 0x44e3e000-0x44e3efff irq 34,35 on simplebus0 am335x_rtc0: AM335X RTC v1.0.6 usbss0: mem 0x47400000-0x47400fff on simplebus0 usbss0: TI AM335X USBSS v0.0.13 musbotg0: mem 0x47401400-0x474017ff,0x47401000-0x474011ff irq 56 on usbss0 usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM usbus0 on musbotg0 musbotg1: mem 0x47401c00-0x47401fff,0x47401800-0x474019ff irq 57 on usbss0 usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM usbus1 on musbotg1 cpswss0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff irq 38,39,40,41 on simplebus0 cpswss0: CPSW SS Version 1.12 (0) cpswss0: Initial queue size TX=128 RX=384 cpsw0: on cpswss0 miibus0: on cpsw0 smscphy0: PHY 0 on miibus0 smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cpsw0: Ethernet address: a0:f6:fd:8a:c5:be fb0: mem 0x4830e000-0x4830efff irq 43 on simplebus0 ti_adc0: mem 0x44e0d000-0x44e0dfff irq 44 disabled on simplebus0 ti_adc0: scheme: 0x1 func: 0x730 rtl: 0 rev: 0.1 custom rev: 0 gpioled0: on ofwbus0 cryptosoft0: Timecounters tick every 1.000 msec mmc_dev_async(async_code=0x20, path_id=0, target_id=0, lun_id=0 Got AC_PATH_REGISTERED -- whatever... mmc_dev_async(async_code=0x20, path_id=0, target_id=ffffffff, lun_id=ffffffff mmc_dev_async(async_code=0x20, path_id=1, target_id=0, lun_id=0 Got AC_PATH_REGISTERED -- whatever... mmc_dev_async(async_code=0x20, path_id=1, target_id=ffffffff, lun_id=ffffffff usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 (noperiph:sdhci_slot0:0:0:0): Set up the mmcprobe device... sdhci_ti0-slot0: Power mode => 0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 sdhci_ti0-slot0: sdhci_cam_update_ios: power_mode=0, clk=0, bus_width=0, timing=0 sdhci_ti0: Custom-disabling 8-bit bus am335x_pmic0: TPS65217C ver 1.2 powered by AC tda0: TDA19988 sdhci_ti0-slot0: Clock => 0 sdhci_ti0-slot0: VDD => 18 sdhci_ti0-slot0: CS => 0 sdhci_ti0-slot0: Bus width => 0 sdhci_ti0-slot0: Power mode => 1 sdhci_ti0-slot0: Bus mode => 1 sdhci_ti0-slot0: sdhci_cam_update_ios: power_mode=1, clk=0, bus_width=0, timing=0 sdhci_ti0: Custom-disabling 8-bit bus tda0: failed to read EDID sdhci_ti0-slot0: Clock => 375000 sdhci_ti0-slot0: Power mode => 2 sdhci_ti0-slot0: Timing => 0 sdhci_ti0-slot0: sdhci_cam_update_ios: power_mode=2, clk=375000, bus_width=0, timing=0 sdhci_ti0: Custom-disabling 8-bit bus uhub1: 1 port with 1 removable, self powered uhub0: 1 port with 1 removable, self powered sdhci_ti0-slot0: CS => 1 sdhci_ti0-slot0: sdhci_cam_update_ios: power_mode=2, clk=375000, bus_width=0, timing=0 sdhci_ti0: Custom-disabling 8-bit bus (noperiph:sdhci_slot1:0:0:0): Set up the mmcprobe device... sdhci_ti1-slot0: Power mode => 0 sdhci_ti1-slot0: sdhci_cam_update_ios: power_mode=0, clk=0, bus_width=0, timing=0 sdhci_ti1: Custom-disabling 8-bit bus Starting completion of PROBE_RESET mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 sdhci_ti0-slot0: Bus mode => 2 sdhci_ti0-slot0: sdhci_cam_update_ios: power_mode=2, clk=375000, bus_width=0, timing=0 sdhci_ti0: Custom-disabling 8-bit bus mmc_probedone: remaining freezecnt 0 mmc_dev_async(async_code=0x80, path_id=0, target_id=0, lun_id=0 Got AC_FOUND_DEVICE -- whatever... sdhci_ti1-slot0: Clock => 0 sdhci_ti1-slot0: VDD => 18 sdhci_ti1-slot0: CS => 0 sdhci_ti1-slot0: Bus width => 0 sdhci_ti1-slot0: Power mode => 1 sdhci_ti1-slot0: Bus mode => 1 sdhci_ti1-slot0: sdhci_cam_update_ios: power_mode=1, clk=0, bus_width=0, timing=0 sdhci_ti1: Custom-disabling 8-bit bus sdhci_ti1-slot0: Clock => 375000 sdhci_ti1-slot0: Power mode => 2 sdhci_ti1-slot0: Timing => 0 sdhci_ti1-slot0: sdhci_cam_update_ios: power_mode=2, clk=375000, bus_width=0, timing=0 sdhci_ti1: Custom-disabling 8-bit bus sdhci_ti1-slot0: CS => 1 sdhci_ti1-slot0: sdhci_cam_update_ios: power_mode=2, clk=375000, bus_width=0, timing=0 sdhci_ti1: Custom-disabling 8-bit bus Starting completion of PROBE_RESET mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 mmc_probedone: remaining freezecnt 1 sdhci_ti1-slot0: Bus mode => 2 sdhci_ti1-slot0: sdhci_cam_update_ios: power_mode=2, clk=375000, bus_width=0, timing=0 sdhci_ti1: Custom-disabling 8-bit bus mmc_probedone: remaining freezecnt 0 mmc_dev_async(async_code=0x80, path_id=1, target_id=0, lun_id=0 Got AC_FOUND_DEVICE -- whatever... WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ufs/rootfs [rw]... mountroot: waiting for device /dev/ufs/rootfs... sdhci_ti0-slot0: Clock => 48000000 sdhci_ti0-slot0: sdhci_cam_update_ios: power_mode=2, clk=48000000, bus_width=0, timing=0 sdhci_ti0: Custom-disabling 8-bit bus sdhci_ti0-slot0: Bus width => 2 sdhci_ti0-slot0: sdhci_cam_update_ios: power_mode=2, clk=48000000, bus_width=2, timing=0 sdhci_ti0: Custom-disabling 8-bit bus sdhci_ti0-slot0: Timing => 1 sdhci_ti0-slot0: sdhci_cam_update_ios: power_mode=2, clk=48000000, bus_width=2, timing=1 sdhci_ti0: Custom-disabling 8-bit bus sdda0 at sdhci_slot0 bus 0 scbus0 target 0 lun 0 sdda0: Relative addr: 0000aaaa Card features: Card memory OCR: 40ff8000 sdda0: Serial Number 42C8082 XPT info: CLK 2DC6C00, ... sdda0: SDHC SS04G 8.0 SN 42C8082A MFG 04/2015 by 3 SD sdhci_ti1-slot0: Clock => 48000000 sdhci_ti1-slot0: sdhci_cam_update_ios: power_mode=2, clk=48000000, bus_width=0, timing=0 sdhci_ti1: Custom-disabling 8-bit bus sdhci_ti1-slot0: Bus width => 3 sdhci_ti1-slot0: sdhci_cam_update_ios: power_mode=2, clk=48000000, bus_width=3, timing=0 sdhci_ti1: Custom-enabling 8-bit bus sdhci_ti1-slot0: Timing => 1 sdhci_ti1-slot0: sdhci_cam_update_ios: power_mode=2, clk=48000000, bus_width=3, timing=1 sdhci_ti1: Custom-enabling 8-bit bus sdda1 at sdhci_slot1 bus 0 scbus1 target 0 lun 0 sdda1: Relative addr: 00000000 Card features: Card memory OCR: 00ff8080 sdda1: Serial Number 78E4617 XPT info: CLK 2DC6C00, ... sdda1: MMCHC S10004 0.8 SN 78E46176 MFG 12/1999 by 112 0x0000 WARNING: / was not properly dismounted Warning: no time-of-day clock registered, system time will not be set accurately ugen1.2: at usbus1 Setting hostuuid: a2123f21-6b32-11e7-82c3-a0f6fd8ac5be. Setting hostid: 0x94ddd7a3. No suitable dump device was found. Starting file system checks: /dev/ufs/rootfs: 120483 files, 601723 used, 334332 free (956 frags, 41672 blocks, 0.1% fragmentation) Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib random: unblocking device. Soft Float compatibility ldconfig path: Setting hostname: bbb.highfell.local. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . ifconfig: SIOCIFCREATE2: Invalid argument bridge0: Ethernet address: 02:94:dd:d7:a3:00 Created clone interfaces: bridge0. cpsw0: link state changed to DOWN cpsw0: promiscuous mode enabled bridge0: link state changed to DOWN ifconfig: BRDGADD wlan0: No such file or directory cpsw0: link state changed to UP bridge0: link state changed to UP Starting Network: lo0 cpsw0 bridge0. lo0: flags=8049 metric 0 mtu 16384 options=600003 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21 cpsw0: flags=8943 metric 0 mtu 1500 options=8000b ether a0:f6:fd:8a:c5:be hwaddr a0:f6:fd:8a:c5:be inet 192.168.2.101 netmask 0xffffff00 broadcast 192.168.2.255 media: Ethernet autoselect (100baseTX ) status: active nd6 options=29 bridge0: flags=8843 metric 0 mtu 1500 ether 02:94:dd:d7:a3:00 id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: cpsw0 flags=143 ifmaxaddr 0 port 1 priority 128 path cost 55 groups: bridge nd6 options=9 Starting devd. run0 on uhub1 run0: <1.0> on usbus1 U-Boot SPL 2015.10-00001-g143c9ee (Nov 06 2015 - 15:27:19) bad magic