#include <stdint.h>
#include <msp430.h> 

void setup(void) {

    // P1.0 (red LED) is output
    P1DIR |= 1;

    // Set DCO to 16 MHz
    BCSCTL1 = CALBC1_16MHZ;
    DCOCTL = CALDCO_16MHZ;

    // Clock output to pin P1.4 (for debugging)
    P1DIR |= 16;
    P1SEL = 16; // Alternate function (SMCLK) on P1.4

    // Select TX,RX functionality for P1.2, P1.1
    P1SEL  |= 6;
    P1SEL2 |= 6;

    // Initialize USCI
    UCA0CTL1 |= 0x80; // Use SMCLK
    // Baudrate 9600 (assuming 16MHz clock)
    UCA0BR0 = 131; // 1667 % 256
    UCA0BR1 = 6;   // 1667 / 256
    // Start
    UCA0CTL1 &= ~1;

    // Enable RX interrupt. TX interrupt should only be enabled when transmitting.
    IE2 = 1;

}

volatile uint8_t gotByte = 0;
volatile char *p;
char msg[6] = "Got x\n";

int main(void) {

	volatile uint32_t x = 0;

    WDTCTL = WDTPW | WDTHOLD;	// stop watchdog timer
	setup();

    __enable_interrupt();
	
	for ( ;  ; ) {


	    // Blink LED
	    if (x == 250000) {
	        P1OUT ^= 1;
	        x = 0;
	    } else {
	        x += 1;
	      }

	    // Check RX data indication
	    if (gotByte) {

            gotByte = 0;
	        // Update the reply string
	        msg[4] = UCA0RXBUF;
	        p = msg;
	        // Enable TX interrupt to start transmission
	        IE2 |= 2;

	    }


	}

	return 0;

}

#pragma vector=USCIAB0TX_VECTOR
__interrupt void TX_ISR(void) {

    if (*p) {
      // Send next char in string
      UCA0TXBUF = *p++;
    } else {
        // Turn off TX interrupt
        IE2 &= ~2;
      }

}

#pragma vector=USCIAB0RX_VECTOR
__interrupt void RX_ISR(void) {
    gotByte = 1;
    // Clear the interrupt flag manually, since we didn't read the buffer yet
    IFG2 &= ~1;
}