esphome:
  name: display
  friendly_name: Display
  comment: Testing st7735 color display

esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: arduino

<<: !include common/comset.yaml

captive_portal:


time:
  - platform: homeassistant
    id: esptime

sensor:
  - platform: homeassistant
    id: u_temp
    entity_id: sensor.ute_temperatur
    internal: true
  - platform: homeassistant
    id: i_temp
    entity_id: sensor.kontor_temperatur
    internal: true
  - platform: homeassistant
    id: baro
    entity_id: sensor.barometer
    internal: true

binary_sensor:
  - platform: homeassistant
    id: g_door
    entity_id: binary_sensor.garage_door
    internal: true

# Display stuff
spi:
  clk_pin: 3
  mosi_pin: 4
  
display:
  - platform: ili9xxx
    model: ST7735
    invert_colors: false
    reset_pin: 5
    cs_pin: 2
    dc_pin: 0
    rotation: 0 
    color_order: bgr
    dimensions:
      height: 128
      width: 128
      offset_width: 2
      offset_height: 1

    update_interval: 1s
    lambda: |-
      // Klokke med sekunder - align center
      it.strftime(64, 16, id(my_font30), id(c_red), TextAlign::CENTER, "%H:%M:%S", id(esptime).now());
      
      // Dato - align center
      it.strftime(64, 40, id(my_font20), id(c_blue), TextAlign::CENTER, "%d-%m-%Y", id(esptime).now());
      
      // Ute temperatur - align left (normal) med 8 px buffer - vises kun om data er tilgjenglig 
      if (id(u_temp).has_state()) { 
        it.printf(8, 50, id(my_font20), id(c_green), "U: %.1f°", id(u_temp).state); 
        }
      
      // Kontor temp ... align right med 8px buffer
      if (id(i_temp).has_state()) { 
        it.printf(120, 50, id(my_font20), id(c_green), TextAlign::RIGHT, "I: %.1f°", id(i_temp).state); 
        }
      
      it.printf(64, 75, id(my_font20), id(c_green), TextAlign::CENTER, "B: %.1f", id(baro).state);  // Barometer
      
      // eksperiment: viser open/closed basert på binær sensor
      //if ( id(g_door).state ) { it.print( 0, 90, my_font20, id(c_red), "Open" ); } 
      //else { it.print( 0, 90, my_font20, id(c_green), "Closed" ); };

      // samme som ovenfor bare med ikon i stedet 
      if ( !id(g_door).state ) { 
        //it.print( 98, 98, icons_50, id(c_green), "\U0000e714" );
        it.image(0, 88, id(i_garage), id(c_green));
        }
      else { 
        //it.print( 98, 98, icons_50, id(c_red), "\U0000e714" ); 
        it.image(0, 88, id(i_garage_o) , id(c_red));
        }

      // MDI Testing
      //it.image(0, 88, id(c_green), id(i_garage));

image:
  - file: mdi:garage
    id: i_garage
    resize: 40x40

  - file: mdi:garage-open
    id: i_garage_o
    resize: 40x40


font:
  - file: "gfonts://Roboto"
    id: my_font20
    size: 16
    

  - file: "gfonts://Roboto"
    id: my_font30
    size: 31
    glyphs: [ 1,2,3,4,5,6,7,8,9,0,"\u003a", ]

  - file: "gfonts://Material+Symbols+Outlined"
    id: icons_50
    size: 30
    glyphs: ["\U0000e714"] # Garage door 

color:
  - id: c_red
    red: 100%
    green: 0%
    blue: 0%
    white: 0%
  - id: c_blue
    red: 0%
    green: 0%
    blue: 100%
    white: 0%
  - id: c_green
    red: 0%
    green: 100%
    blue: 0%
    white: 0%