#include <ESP8266WiFi.h>
#include <PubSubClient.h>

// Update these with values suitable for your network.

int LED1=2;
int LED2=16;
const char* ssid = "mywifi";
const char* password = "123456789";
// const char* mqtt_server = "broker.mqtt-dashboard.com";
const char* mqtt_server = "192.168.1.4";
WiFiClient espClient;
PubSubClient client(espClient);
unsigned long lastMsg = 0;
#define MSG_BUFFER_SIZE	(50)
char msg[MSG_BUFFER_SIZE];
int value = 0;

void setup_wifi() {

  delay(10);
  // We start by connecting to a WiFi network
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);

  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  randomSeed(micros());

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

void callback(char* topic, byte* payload, unsigned int length) {
  Serial.print("Message arrived [");
  Serial.print(topic);
  Serial.print("] ");
  for (int i = 0; i < length; i++) {
    Serial.print((char)payload[i]);
  }
  Serial.println();

  if (strcmp(topic, "ruangan/lampu1") == 0) {
    // Switch on the LED if an 1 was received as first character
    if ((char)payload[0] == '1') {
      digitalWrite(LED1, LOW);   // Turn the LED on (Note that LOW is the voltage level
    } else {
      digitalWrite(LED1, HIGH);  // Turn the LED off by making the voltage HIGH
    }
  }
 
  if (strcmp(topic, "ruangan/lampu2") == 0) {
    // Switch on the LED if an 1 was received as first character
    if ((char)payload[0] == '1') {
      digitalWrite(LED2, LOW);   // Turn the LED on (Note that LOW is the voltage level
    } else {
      digitalWrite(LED2, HIGH);  // Turn the LED off by making the voltage HIGH
    }
  }

}

void reconnect() {
  // Loop until we're reconnected
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    // Create a random client ID
    String clientId = "ESP8266Client-";
    clientId += String(random(0xffff), HEX);
    // Attempt to connect
    if (client.connect(clientId.c_str())) {
      Serial.println("connected");
      // Once connected, publish an announcement...
      client.publish("ruangan/suhu", "hello world");
      // ... and resubscribe
      client.subscribe("ruangan/lampu1");
      client.subscribe("ruangan/lampu2");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      // Wait 5 seconds before retrying
      delay(5000);
    }
  }
}

void setup() {
  pinMode(LED1, OUTPUT);    
  pinMode(LED2, OUTPUT);   
  Serial.begin(115200);
  setup_wifi();
  client.setServer(mqtt_server, 1883);
  client.setCallback(callback);
}

void loop() {

  if (!client.connected()) {
    reconnect();
  }
  client.loop();

  unsigned long now = millis();
  if (now - lastMsg > 2000) {    
    lastMsg = now;
    ++value;
    if(value==100) {
       value=0;
    }
    
      
    snprintf (msg, MSG_BUFFER_SIZE, "%ld", value);
    Serial.print("Publish message: ");
    Serial.println(msg);
    client.publish("ruangan/suhu", msg);
  }
}