Pasted

substitutions:
  name: esphome-web-252354
  friendly_name: ESPHome Bedroom Cam
  camera_name: Primary Camera
 
esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  min_version: 2024.6.0
  name_add_mac_suffix: false
  project:
    name: esphome.web
    version: dev
 
esp32:
  board: esp32dev
  framework:
    type: arduino
 
# Enable logging
logger:

# Enable Home Assistant API
api:

# Allow Over-The-Air updates
ota:
- platform: esphome
 
# Allow provisioning Wi-Fi via serial
improv_serial:

wifi:
  # Set up a wifi access point
  ap: {}
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  output_power: 10dB
  reboot_timeout: 3min
  manual_ip:
    static_ip: 192.168.2.212
    gateway: 192.168.2.1
    subnet: 255.255.255.0
 
# In combination with the `ap` this allows the user
# to provision wifi credentials to the device via WiFi AP.
captive_portal:

dashboard_import:
  package_import_url: github://esphome/example-configs/esphome-web/esp32.yaml@main
  import_full_config: true
 
# Sets up Bluetooth LE (Only on ESP32) to allow the user
# to provision wifi credentials to the device.
esp32_improv:
  authorizer: none
 
# To have a "next url" for improv serial
web_server:

switch:
  - platform: gpio
    name: "${camera_name} flash"
    pin: 4
    #inverted: True
  - platform: restart
    name: "${name} - Restart"
    id: restart_switch
 
esp32_camera:
  name: "${camera_name}"
  external_clock:
    pin: GPIO0
    frequency: 20MHz
  i2c_pins:
    sda: GPIO26
    scl: GPIO27
  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
  vsync_pin: GPIO25
  href_pin: GPIO23
  pixel_clock_pin: GPIO22
  power_down_pin: GPIO32
  # Image settings
  max_framerate: 5 fps    # default: 10 fps, max 60
  idle_framerate: 0.1 fps # default: 0.1 fps - framerate for 'picture' in HA dashboard
  resolution: 640x480     # default: 640x480 (VGA) - higher res requires more memory
  jpeg_quality: 30        # 10 (best) to 63 (worst)