KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #8 r321242M: Thu Jul 20 13:42:15 PDT 2017
[email protected]:/usr/home/russellh/FreeBSD/rh-armv6/obj/arm.armv6/usr/home/russellh/FreeBSD/rh-armv6/src/sys/IMX6 arm
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc295c000.
Preloaded dtb "/boot/dtb/imx6q-hummingboard.dtb" at 0xc295c81c.
CPU: ARM Cortex-A9 r2p10 (ECO: 0x00000000)
CPU Features:
Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk
Optional instructions:
UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 4-way instruction cache Read-Alloc
real memory = 1073741824 (1024 MB)
avail memory = 1035255808 (987 MB)
Physical memory chunk(s):
0x10000000 - 0x4fffffff, 1024 MB ( 262144 pages)
Excluded memory regions:
0x12200000 - 0x12c53fff, 10 MB ( 2644 pages) NoAlloc
Static device mappings:
0x00a00000 - 0x00afffff mapped at VA 0xffe00000
0x02000000 - 0x020fffff mapped at VA 0xffd00000
0x02100000 - 0x021fffff mapped at VA 0xffc00000
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
arc4random: no preloaded entropy cache
ULE: setup cpu 0
ULE: setup cpu 1
random: entropy device external interface
openfirm: <Open Firmware control device>
kbd0 at kbdmux0
mem: <memory>
nfslock: pseudo-device
crypto: <crypto core>
null: <full device, null device, zero device>
random: harvesting attach, 8 bytes (4 bits) from nexus0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on simplebus1
random: harvesting attach, 8 bytes (4 bits) from simplebus2
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 46,47,48 on simplebus1
random: harvesting attach, 8 bytes (4 bits) from imx6_anatop0
random: harvesting attach, 8 bytes (4 bits) from simplebus1
simplebus3: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
random: harvesting attach, 8 bytes (4 bits) from simplebus3
random: harvesting attach, 8 bytes (4 bits) from simplebus0
random: harvesting attach, 8 bytes (4 bits) from ofwbus0
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus3
random: harvesting attach, 8 bytes (4 bits) from ocotp0
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 44,45 on simplebus1
random: harvesting attach, 8 bytes (4 bits) from ccm0
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 9 on simplebus0
l2cache0: cannot allocate IRQ, not using interrupt
l2cache0: Part number: 0x3, release: 0x7
l2cache0: Warning: L2 Cache should not already be active; trying to de-activate and re-initialize...
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
l2cache0: Early BRESP response: disabled
l2cache0: Instruction prefetch: enabled
l2cache0: Data prefetch: enabled
l2cache0: Non-secure interrupt control: disabled
l2cache0: Non-secure lockdown: disabled
l2cache0: Share override: enabled
l2cache0: Double linefill: enabled
l2cache0: Instruction prefetch: enabled
l2cache0: Data prefetch: enabled
l2cache0: Double linefill on WRAP request: disabled
l2cache0: Prefetch drop: disabled
l2cache0: Incr double Linefill: enabled
l2cache0: Not same ID on exclusive sequence: disabled
l2cache0: Prefetch offset: 0
random: harvesting attach, 8 bytes (4 bits) from l2cache0
imx6_anatop0: CPU 996MHz @ 1225mV
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on simplebus1
Processing 1 pin-config node(s) in pinctrl-0 for hdmi@0120000
hummingboard-hdmi: muxreg 0x020c muxval 0x06 inpreg 0x088c inpval 0x01 padreg 0x05dc padval 0x0001f8b0
Processing 1 pin-config node(s) in pinctrl-0 for pcie@1ffc000
hummingboard-pcie-reset: muxreg 0x0124 muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x0438 padval 0x0001b0b1
Processing 1 pin-config node(s) in pinctrl-0 for spdif@02004000
hummingboard-spdif: muxreg 0x024c muxval 0x04 inpreg 0x0000 inpval 0x00 padreg 0x061c padval 0x00013091
Processing 1 pin-config node(s) in pinctrl-0 for serial@02020000
microsom-uart1: muxreg 0x0280 muxval 0x03 inpreg 0x0000 inpval 0x00 padreg 0x0650 padval 0x0001b0b1
microsom-uart1: muxreg 0x0284 muxval 0x03 inpreg 0x0920 inpval 0x01 padreg 0x0654 padval 0x0001b0b1
Processing 1 pin-config node(s) in pinctrl-0 for pwm@02080000
pwm1grp: muxreg 0x0190 muxval 0x02 inpreg 0x0000 inpval 0x00 padreg 0x04a4 padval 0x0001b0b1
Processing 1 pin-config node(s) in pinctrl-0 for flexcan@02090000
hummingboard-flexcan1: muxreg 0x02bc muxval 0x02 inpreg 0x07e4 inpval 0x02 padreg 0x06a4 padval 0x80000000
hummingboard-flexcan1: muxreg 0x02b8 muxval 0x02 inpreg 0x0000 inpval 0x00 padreg 0x06a0 padval 0x80000000
Processing 1 pin-config node(s) in pinctrl-0 for usb@02184000
hummingboard-usbotg-id: muxreg 0x0224 muxval 0x03 inpreg 0x0004 inpval 0xff0d0101 padreg 0x05f4 padval 0x00013059
Processing 1 pin-config node(s) in pinctrl-0 for ethernet@02188000
microsom-enet-ar8035: muxreg 0x01d0 muxval 0x01 inpreg 0x0840 inpval 0x00 padreg 0x04e4 padval 0x0001b8b0
microsom-enet-ar8035: muxreg 0x01f4 muxval 0x01 inpreg 0x0000 inpval 0x00 padreg 0x0508 padval 0x0001b0b0
microsom-enet-ar8035: muxreg 0x021c muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x05ec padval 0x000130b0
microsom-enet-ar8035: muxreg 0x0164 muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x0478 padval 0x80000000
microsom-enet-ar8035: muxreg 0x0248 muxval 0x12 inpreg 0x083c inpval 0x01 padreg 0x0618 padval 0xc0000000
microsom-enet-ar8035: muxreg 0x0058 muxval 0x01 inpreg 0x0000 inpval 0x00 padreg 0x036c padval 0x80000000
microsom-enet-ar8035: muxreg 0x005c muxval 0x01 inpreg 0x0000 inpval 0x00 padreg 0x0370 padval 0x0001b030
microsom-enet-ar8035: muxreg 0x0060 muxval 0x01 inpreg 0x0000 inpval 0x00 padreg 0x0374 padval 0x0001b030
microsom-enet-ar8035: muxreg 0x0064 muxval 0x01 inpreg 0x0000 inpval 0x00 padreg 0x0378 padval 0x0001b030
microsom-enet-ar8035: muxreg 0x0068 muxval 0x01 inpreg 0x0000 inpval 0x00 padreg 0x037c padval 0x0001b030
microsom-enet-ar8035: muxreg 0x0074 muxval 0x01 inpreg 0x0000 inpval 0x00 padreg 0x0388 padval 0x0001b030
microsom-enet-ar8035: muxreg 0x01d4 muxval 0x01 inpreg 0x0000 inpval 0x00 padreg 0x04e8 padval 0x0000a0b1
microsom-enet-ar8035: muxreg 0x0084 muxval 0x01 inpreg 0x0844 inpval 0x00 padreg 0x0398 padval 0x0001b030
microsom-enet-ar8035: muxreg 0x0070 muxval 0x01 inpreg 0x0848 inpval 0x00 padreg 0x0384 padval 0x00013030
microsom-enet-ar8035: muxreg 0x0078 muxval 0x01 inpreg 0x084c inpval 0x00 padreg 0x038c padval 0x00013030
microsom-enet-ar8035: muxreg 0x007c muxval 0x01 inpreg 0x0850 inpval 0x00 padreg 0x0390 padval 0x0001b030
microsom-enet-ar8035: muxreg 0x0080 muxval 0x01 inpreg 0x0854 inpval 0x00 padreg 0x0394 padval 0x0001b030
microsom-enet-ar8035: muxreg 0x006c muxval 0x01 inpreg 0x0858 inpval 0x00 padreg 0x0380 padval 0x00013030
microsom-enet-ar8035: muxreg 0x01dc muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x04f0 padval 0x00003000
microsom-enet-ar8035: muxreg 0x01e4 muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x04f8 padval 0x00003000
microsom-enet-ar8035: muxreg 0x01e0 muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x04f4 padval 0x00003000
Processing 2 pin-config node(s) in pinctrl-0 for usdhc@02190000
microsom-brcm-wifi: muxreg 0x0244 muxval 0x01 inpreg 0x0000 inpval 0x00 padreg 0x0614 padval 0x0001b0b0
microsom-brcm-wifi: muxreg 0x0260 muxval 0x15 inpreg 0x0000 inpval 0x00 padreg 0x0630 padval 0x40013070
microsom-brcm-wifi: muxreg 0x0278 muxval 0x15 inpreg 0x0000 inpval 0x00 padreg 0x0648 padval 0x40013070
microsom-brcm-wifi: muxreg 0x027c muxval 0x15 inpreg 0x0000 inpval 0x00 padreg 0x064c padval 0x40013070
microsom-usdhc1: muxreg 0x0348 muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0730 padval 0x00017059
microsom-usdhc1: muxreg 0x0350 muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0738 padval 0x00010059
microsom-usdhc1: muxreg 0x0340 muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0728 padval 0x00017059
microsom-usdhc1: muxreg 0x033c muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0724 padval 0x00017059
microsom-usdhc1: muxreg 0x034c muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0734 padval 0x00017059
microsom-usdhc1: muxreg 0x0344 muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x072c padval 0x00017059
Processing 2 pin-config node(s) in pinctrl-0 for usdhc@02194000
hummingboard-usdhc2-aux: muxreg 0x0238 muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x0608 padval 0x0001f071
hummingboard-usdhc2: muxreg 0x0358 muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0740 padval 0x00017059
hummingboard-usdhc2: muxreg 0x0354 muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x073c padval 0x00010059
hummingboard-usdhc2: muxreg 0x0054 muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0368 padval 0x00017059
hummingboard-usdhc2: muxreg 0x004c muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0360 padval 0x00017059
hummingboard-usdhc2: muxreg 0x0050 muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0364 padval 0x00017059
hummingboard-usdhc2: muxreg 0x035c muxval 0x00 inpreg 0x0000 inpval 0x00 padreg 0x0744 padval 0x00013059
Processing 1 pin-config node(s) in pinctrl-0 for sgtl5000@0a
hummingboard-sgtl5000: muxreg 0x01bc muxval 0x03 inpreg 0x07cc inpval 0x00 padreg 0x04d0 padval 0x000130b0
hummingboard-sgtl5000: muxreg 0x01f8 muxval 0x02 inpreg 0x07dc inpval 0x01 padreg 0x05c8 padval 0x000130b0
hummingboard-sgtl5000: muxreg 0x01fc muxval 0x02 inpreg 0x07d0 inpval 0x01 padreg 0x05cc padval 0x000110b0
hummingboard-sgtl5000: muxreg 0x0200 muxval 0x02 inpreg 0x07e0 inpval 0x01 padreg 0x05d0 padval 0x000130b0
hummingboard-sgtl5000: muxreg 0x023c muxval 0x03 inpreg 0x0000 inpval 0x00 padreg 0x060c padval 0x000130b0
Processing 1 pin-config node(s) in pinctrl-0 for i2c@021a0000
hummingboard-i2c1: muxreg 0x00a4 muxval 0x16 inpreg 0x0898 inpval 0x00 padreg 0x03b8 padval 0x4001b8b1
hummingboard-i2c1: muxreg 0x00c4 muxval 0x11 inpreg 0x089c inpval 0x00 padreg 0x03d8 padval 0x4001b8b1
Processing 1 pin-config node(s) in pinctrl-0 for i2c@021a4000
hummingboard-i2c2: muxreg 0x0210 muxval 0x14 inpreg 0x08a0 inpval 0x01 padreg 0x05e0 padval 0x4001b8b1
hummingboard-i2c2: muxreg 0x0214 muxval 0x14 inpreg 0x08a4 inpval 0x01 padreg 0x05e4 padval 0x4001b8b1
Processing 2 pin-config node(s) in pinctrl-0 for serial@021f0000
microsom-brcm-bt: muxreg 0x0290 muxval 0x15 inpreg 0x0000 inpval 0x00 padreg 0x0660 padval 0x40013070
microsom-brcm-bt: muxreg 0x0294 muxval 0x15 inpreg 0x0000 inpval 0x00 padreg 0x0664 padval 0x40013070
microsom-brcm-bt: muxreg 0x02a0 muxval 0x15 inpreg 0x0000 inpval 0x00 padreg 0x0670 padval 0x40013070
microsom-uart4: muxreg 0x0288 muxval 0x03 inpreg 0x0000 inpval 0x00 padreg 0x0658 padval 0x0001b0b1
microsom-uart4: muxreg 0x028c muxval 0x03 inpreg 0x0938 inpval 0x03 padreg 0x065c padval 0x0001b0b1
microsom-uart4: muxreg 0x0298 muxval 0x03 inpreg 0x0934 inpval 0x00 padreg 0x0668 padval 0x0001b0b1
microsom-uart4: muxreg 0x029c muxval 0x03 inpreg 0x0000 inpval 0x00 padreg 0x066c padval 0x0001b0b1
Processing 1 pin-config node(s) in pinctrl-0 for sdio-clock
microsom-brcm-osc: muxreg 0x019c muxval 0x15 inpreg 0x0000 inpval 0x00 padreg 0x04b0 padval 0x40013070
Processing 1 pin-config node(s) in pinctrl-0 for brcm-reg
microsom-brcm-reg: muxreg 0x009c muxval 0x15 inpreg 0x0000 inpval 0x00 padreg 0x03b0 padval 0x40013070
Processing 1 pin-config node(s) in pinctrl-0 for usb-h1-vbus
hummingboard-usbh1-vbus: muxreg 0x0220 muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x05f0 padval 0x0001b0b0
Processing 1 pin-config node(s) in pinctrl-0 for usb-otg-vbus
hummingboard-usbotg-vbus: muxreg 0x00a8 muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x03bc padval 0x0001b0b0
Processing 1 pin-config node(s) in pinctrl-0 for ir-receiver
hummingboard-gpio3_5: muxreg 0x0128 muxval 0x05 inpreg 0x0000 inpval 0x00 padreg 0x043c padval 0x0001b0b1
random: harvesting attach, 8 bytes (4 bits) from imx_iomux0
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
simplebus0: no default resources for rid = 0, type = 1
gic0: pn 0x39, arch 0x1, rev 0x2, implementer 0x43b irqs 160
random: harvesting attach, 8 bytes (4 bits) from gic0
imx_epit0: <i.MX EPIT timer> mem 0x20d0000-0x20d3fff irq 52 on simplebus1
Timecounter "EPIT" frequency 66000000 Hz quality 1000
random: harvesting attach, 8 bytes (4 bits) from imx_epit0
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 8 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
random: harvesting attach, 8 bytes (4 bits) from mp_tmr0
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 50 on simplebus1
random: harvesting attach, 8 bytes (4 bits) from usbphy0
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 51 on simplebus1
random: harvesting attach, 8 bytes (4 bits) from usbphy1
imx_usbmisc0: <i.MX USB Misc Control> mem 0x2184800-0x21849ff on simplebus3
random: harvesting attach, 8 bytes (4 bits) from imx_usbmisc0
simplebus0: <dma-apbh@00110000> mem 0x110000-0x111fff irq 0,1,2,3 compat fsl,imx6q-dma-apbh (no driver attached)
simplebus0: <gpmi-nand@00112000> mem 0x112000-0x113fff,0x114000-0x115fff irq 4 disabled compat fsl,imx6q-gpmi-nand (no driver attached)
hdmi0: <Freescale i.MX6 HDMI core> mem 0x120000-0x128fff irq 5 on simplebus0
hdmi0: HDMI controller 13:0a:a0:c1
random: harvesting attach, 8 bytes (4 bits) from hdmi0
simplebus0: <gpu@00130000> mem 0x130000-0x133fff irq 6 compat vivante,gc (no driver attached)
simplebus0: <gpu@00134000> mem 0x134000-0x137fff irq 7 compat vivante,gc (no driver attached)
simplebus0: <pcie@1ffc000> mem 0x1ffc000-0x1ffffff,0x1f00000-0x1f7ffff irq 10 type pci compat fsl,imx6q-pcie (no driver attached)
simplebus0: <pmu> irq 11 compat arm,cortex-a9-pmu (no driver attached)
simplebus2: <spdif@02004000> mem 0x2004000-0x2007fff irq 61 compat fsl,imx35-spdif (no driver attached)
simplebus2: <ecspi@02008000> mem 0x2008000-0x200bfff irq 62 disabled compat fsl,imx6q-ecspi (no driver attached)
simplebus2: <ecspi@0200c000> mem 0x200c000-0x200ffff irq 63 disabled compat fsl,imx6q-ecspi (no driver attached)
simplebus2: <ecspi@02010000> mem 0x2010000-0x2013fff irq 64 disabled compat fsl,imx6q-ecspi (no driver attached)
simplebus2: <ecspi@02014000> mem 0x2014000-0x2017fff irq 65 disabled compat fsl,imx6q-ecspi (no driver attached)
uart0: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 66 on simplebus2
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
random: harvesting attach, 8 bytes (4 bits) from uart0
simplebus2: <esai@02024000> mem 0x2024000-0x2027fff irq 67 disabled compat fsl,imx35-esai (no driver attached)
simplebus2: <ssi@02028000> mem 0x2028000-0x202bfff irq 68 compat fsl,imx6q-ssi (no driver attached)
simplebus2: <ssi@0202c000> mem 0x202c000-0x202ffff irq 69 disabled compat fsl,imx6q-ssi (no driver attached)
simplebus2: <ssi@02030000> mem 0x2030000-0x2033fff irq 70 disabled compat fsl,imx6q-ssi (no driver attached)
simplebus2: <asrc@02034000> mem 0x2034000-0x2037fff irq 71 compat fsl,imx53-asrc (no driver attached)
simplebus2: <ecspi@02018000> mem 0x2018000-0x201bfff irq 72 disabled compat fsl,imx6q-ecspi (no driver attached)
simplebus1: <vpu@02040000> mem 0x2040000-0x207bfff irq 18,19 compat fsl,imx6q-vpu (no driver attached)
simplebus1: <pwm@02080000> mem 0x2080000-0x2083fff irq 20 compat fsl,imx6q-pwm (no driver attached)
simplebus1: <pwm@02084000> mem 0x2084000-0x2087fff irq 21 compat fsl,imx6q-pwm (no driver attached)
simplebus1: <pwm@02088000> mem 0x2088000-0x208bfff irq 22 disabled compat fsl,imx6q-pwm (no driver attached)
simplebus1: <pwm@0208c000> mem 0x208c000-0x208ffff irq 23 disabled compat fsl,imx6q-pwm (no driver attached)
simplebus1: <flexcan@02090000> mem 0x2090000-0x2093fff irq 24 compat fsl,imx6q-flexcan (no driver attached)
simplebus1: <flexcan@02094000> mem 0x2094000-0x2097fff irq 25 disabled compat fsl,imx6q-flexcan (no driver attached)
simplebus1: <gpt@02098000> mem 0x2098000-0x209bfff irq 26 compat fsl,imx6q-gpt (no driver attached)
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 27,28 on simplebus1
gpiobus0: <GPIO bus> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpiobus0
gpioc0: <GPIO controller> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpioc0
random: harvesting attach, 8 bytes (4 bits) from gpio0
gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 29,30 on simplebus1
gpiobus1: <GPIO bus> on gpio1
random: harvesting attach, 8 bytes (4 bits) from gpiobus1
gpioc1: <GPIO controller> on gpio1
random: harvesting attach, 8 bytes (4 bits) from gpioc1
random: harvesting attach, 8 bytes (4 bits) from gpio1
gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 31,32 on simplebus1
gpiobus2: <GPIO bus> on gpio2
random: harvesting attach, 8 bytes (4 bits) from gpiobus2
gpioc2: <GPIO controller> on gpio2
random: harvesting attach, 8 bytes (4 bits) from gpioc2
random: harvesting attach, 8 bytes (4 bits) from gpio2
gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 33,34 on simplebus1
gpiobus3: <GPIO bus> on gpio3
random: harvesting attach, 8 bytes (4 bits) from gpiobus3
gpioc3: <GPIO controller> on gpio3
random: harvesting attach, 8 bytes (4 bits) from gpioc3
random: harvesting attach, 8 bytes (4 bits) from gpio3
gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 35,36 on simplebus1
gpiobus4: <GPIO bus> on gpio4
random: harvesting attach, 8 bytes (4 bits) from gpiobus4
gpioc4: <GPIO controller> on gpio4
random: harvesting attach, 8 bytes (4 bits) from gpioc4
random: harvesting attach, 8 bytes (4 bits) from gpio4
gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 37,38 on simplebus1
gpiobus5: <GPIO bus> on gpio5
random: harvesting attach, 8 bytes (4 bits) from gpiobus5
gpioc5: <GPIO controller> on gpio5
random: harvesting attach, 8 bytes (4 bits) from gpioc5
random: harvesting attach, 8 bytes (4 bits) from gpio5
gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 39,40 on simplebus1
gpiobus6: <GPIO bus> on gpio6
random: harvesting attach, 8 bytes (4 bits) from gpiobus6
gpioc6: <GPIO controller> on gpio6
random: harvesting attach, 8 bytes (4 bits) from gpioc6
random: harvesting attach, 8 bytes (4 bits) from gpio6
simplebus1: <kpp@020b8000> mem 0x20b8000-0x20bbfff irq 41 disabled compat fsl,imx6q-kpp (no driver attached)
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 42 on simplebus1
random: harvesting attach, 8 bytes (4 bits) from imx_wdog0
simplebus1: <wdog@020c0000> mem 0x20c0000-0x20c3fff irq 43 disabled compat fsl,imx6q-wdt (no driver attached)
simplebus1: <tempmon> irq 49 compat fsl,imx6q-tempmon (no driver attached)
snvs0: <i.MX6 SNVS RTC> mem 0x20cc000-0x20cffff on simplebus1
snvs0: registered as a time-of-day clock, resolution 0.000030s
random: harvesting attach, 8 bytes (4 bits) from snvs0
src0: <Freescale i.MX6 System Reset Controller> mem 0x20d8000-0x20dbfff irq 54,55 on simplebus1
random: harvesting attach, 8 bytes (4 bits) from src0
simplebus1: <gpc@020dc000> mem 0x20dc000-0x20dffff irq 56,57 compat fsl,imx6q-gpc (no driver attached)
simplebus1: <iomuxc-gpr@020e0000> mem 0x20e0000-0x20e0037 compat fsl,imx6q-iomuxc-gpr (no driver attached)
simplebus1: <ldb> disabled compat fsl,imx6q-ldb (no driver attached)
simplebus1: <sdma@020ec000> mem 0x20ec000-0x20effff irq 60 compat fsl,imx6q-sdma (no driver attached)
simplebus3: <caam@2100000> mem 0x2100000-0x210ffff compat fsl,sec-v4.0 (no driver attached)
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 73 on simplebus3
usbus0: EHCI version 1.0
usbus0: stop timeout
usbus0 on ehci0
ehci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
random: harvesting attach, 8 bytes (4 bits) from ehci0
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 74 on simplebus3
usbus1: EHCI version 1.0
usbus1 on ehci1
ehci1: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus1
random: harvesting attach, 8 bytes (4 bits) from ehci1
simplebus3: <usb@02184400> mem 0x2184400-0x21845ff irq 75 disabled compat fsl,imx6q-usb (no driver attached)
simplebus3: <usb@02184600> mem 0x2184600-0x21847ff irq 76 disabled compat fsl,imx6q-usb (no driver attached)
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 77,78 on simplebus3
ffec0: MAC address d0:63:b4:00:8f:19:
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: OUI 0x00c82e, model 0x0007, rev. 2
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from atphy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
ffec0: bpf attached
ffec0: Ethernet address: d0:63:b4:00:8f:19
random: harvesting attach, 8 bytes (4 bits) from ffec0
sdhci_fsl0: <Freescale uSDHC controller> mem 0x2190000-0x2193fff irq 82 on simplebus3
sdhci_fsl0: Non-removable media
sdhci_fsl0-slot0: 200MHz HS 8bits VDD: 3.3V 3.0V VCCQ: 3.3V DRV: B PIO
sdhci_fsl0-slot0: ============== REGISTER DUMP ==============
sdhci_fsl0-slot0: Sys addr: 0x00000000 | Version: 0x00000002
sdhci_fsl0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000001
sdhci_fsl0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_fsl0-slot0: Present: 0x00f80000 | Host ctl: 0x00000000
sdhci_fsl0-slot0: Power: 0x0000000d | Blk gap: 0x00000080
sdhci_fsl0-slot0: Wake-up: 0x00000008 | Clock: 0x00000007
sdhci_fsl0-slot0: Timeout: 0x00000080 | Int stat: 0x00000000
sdhci_fsl0-slot0: Int enab: 0x017f003b | Sig enab: 0x017f003b
sdhci_fsl0-slot0: AC12 err: 0x00000000 | Host ctl2: 0x00000000
sdhci_fsl0-slot0: Caps: 0x03770000 | Caps2: 0x08800880
sdhci_fsl0-slot0: Max curr: 0x80000000 | ADMA err: 0x00000000
sdhci_fsl0-slot0: ADMA addr: 0x00000000 | Slot int: 0x00000000
sdhci_fsl0-slot0: ===========================================
sdhci_fsl0-slot0: Card inserted
mmc0: <MMC/SD bus> on sdhci_fsl0
random: harvesting attach, 8 bytes (4 bits) from mmc0
random: harvesting attach, 8 bytes (4 bits) from sdhci_fsl0
sdhci_fsl1: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 83 on simplebus3
sdhci_fsl1: Card presence detect on gpio0 pin 4, configured for interrupts.
sdhci_fsl1-slot0: 200MHz HS 8bits VDD: 3.3V 3.0V VCCQ: 3.3V DRV: B PIO
sdhci_fsl1-slot0: ============== REGISTER DUMP ==============
sdhci_fsl1-slot0: Sys addr: 0x00000000 | Version: 0x00000002
sdhci_fsl1-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001
sdhci_fsl1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_fsl1-slot0: Present: 0x00f80000 | Host ctl: 0x00000002
sdhci_fsl1-slot0: Power: 0x0000000d | Blk gap: 0x00000080
sdhci_fsl1-slot0: Wake-up: 0x00000000 | Clock: 0x00000007
sdhci_fsl1-slot0: Timeout: 0x0000008c | Int stat: 0x00000000
sdhci_fsl1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_fsl1-slot0: AC12 err: 0x00000000 | Host ctl2: 0x00000000
sdhci_fsl1-slot0: Caps: 0x03770000 | Caps2: 0x08800880
sdhci_fsl1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_fsl1-slot0: ADMA addr: 0x00000000 | Slot int: 0x00000000
sdhci_fsl1-slot0: ===========================================
sdhci_fsl1-slot0: Card inserted
mmc1: <MMC/SD bus> on sdhci_fsl1
random: harvesting attach, 8 bytes (4 bits) from mmc1
random: harvesting attach, 8 bytes (4 bits) from sdhci_fsl1
simplebus3: <usdhc@02198000> mem 0x2198000-0x219bfff irq 84 disabled compat fsl,imx6q-usdhc (no driver attached)
simplebus3: <usdhc@0219c000> mem 0x219c000-0x219ffff irq 85 disabled compat fsl,imx6q-usdhc (no driver attached)
iichb0: <Freescale i.MX I2C> mem 0x21a0000-0x21a3fff irq 86 on simplebus3
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
random: harvesting attach, 8 bytes (4 bits) from iic0
iicbus0: <unknown card> at addr 0xd0
iicbus0: <unknown card> at addr 0x14
random: harvesting attach, 8 bytes (4 bits) from iicbus0
random: harvesting attach, 8 bytes (4 bits) from iichb0
iichb1: <Freescale i.MX I2C> mem 0x21a4000-0x21a7fff irq 87 on simplebus3
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
random: harvesting attach, 8 bytes (4 bits) from iic1
random: harvesting attach, 8 bytes (4 bits) from iicbus1
random: harvesting attach, 8 bytes (4 bits) from iichb1
simplebus3: <i2c@021a8000> mem 0x21a8000-0x21abfff irq 88 disabled compat fsl,imx6q-i2c (no driver attached)
simplebus3: <mmdc@021b0000> mem 0x21b0000-0x21b3fff compat fsl,imx6q-mmdc (no driver attached)
simplebus3: <weim@021b8000> mem 0x21b8000-0x21bbfff irq 89 disabled compat fsl,imx6q-weim (no driver attached)
simplebus3: <audmux@021d8000> mem 0x21d8000-0x21dbfff compat fsl,imx6q-audmux (no driver attached)
simplebus3: <vdoa@021e4000> mem 0x21e4000-0x21e7fff irq 92 compat fsl,imx6q-vdoa (no driver attached)
simplebus3: <serial@021e8000> mem 0x21e8000-0x21ebfff irq 93 disabled compat fsl,imx6q-uart (no driver attached)
simplebus3: <serial@021ec000> mem 0x21ec000-0x21effff irq 94 disabled compat fsl,imx6q-uart (no driver attached)
uart1: <Freescale i.MX UART> mem 0x21f0000-0x21f3fff irq 95 on simplebus3
uart1: fast interrupt
uart1: PPS capture mode: DCD
random: harvesting attach, 8 bytes (4 bits) from uart1
simplebus3: <serial@021f4000> mem 0x21f4000-0x21f7fff irq 96 disabled compat fsl,imx6q-uart (no driver attached)
fb0: <Freescale IPU> mem 0x2400000-0x27fffff irq 12,13 on simplebus0
random: harvesting attach, 8 bytes (4 bits) from fb0
simplebus0: <sram@00900000> mem 0x900000-0x93ffff compat mmio-sram (no driver attached)
ahci0: <i.MX6 Integrated AHCI controller> mem 0x2200000-0x2203fff irq 14 on simplebus0
Got to russells code.unknown: imx6_ahci_phy_addr: timeout on SATA_P0PHYCR_CR_CAP_ADDR=1
unknown: imx6_ahci_phy_write: error on imx6_ahci_phy_addr
ahci0: cannot reset PHY
device_attach: ahci0 attach returned 60
simplebus0: <gpu@02204000> mem 0x2204000-0x2207fff irq 15 compat vivante,gc (no driver attached)
simplebus0: <ipu@02800000> mem 0x2800000-0x2bfffff irq 16,17 compat fsl,imx6q-ipu (no driver attached)
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: missing 'clock-frequency' property
random: harvesting attach, 8 bytes (4 bits) from cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu1: missing 'clock-frequency' property
random: harvesting attach, 8 bytes (4 bits) from cpu1
cpu2: <Open Firmware CPU> on cpulist0
cpu2: missing 'clock-frequency' property
random: harvesting attach, 8 bytes (4 bits) from cpu2
cpu3: <Open Firmware CPU> on cpulist0
cpu3: missing 'clock-frequency' property
random: harvesting attach, 8 bytes (4 bits) from cpu3
random: harvesting attach, 8 bytes (4 bits) from cpulist0
ofwbus0: <display-subsystem> compat fsl,imx-display-subsystem (no driver attached)
ofwbus0: <gpu-subsystem> compat fsl,imx-gpu-subsystem (no driver attached)
ofwbus0: <sdio-clock> compat gpio-gate-clock (no driver attached)
ofwbus0: <regulators> compat simple-bus (no driver attached)
ofwbus0: <usdhc1_pwrseq> compat mmc-pwrseq-simple (no driver attached)
ofwbus0: <ir-receiver> compat gpio-ir-receiver (no driver attached)
ofwbus0: <sound-sgtl5000> compat fsl,imx-audio-sgtl5000 (no driver attached)
ofwbus0: <sound-spdif> compat fsl,imx-audio-spdif (no driver attached)
cryptosoft0: <software crypto>
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
hdmi0: reading EDID from iicbus1, block 0, addr 50
hdmi0: i2c transfer failed: 2
fb0: failed to get EDID info from HDMI framer
fbd0 on fb0
VT: initialize with new VT driver "fb".
random: harvesting attach, 8 bytes (4 bits) from fbd0
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
sdhci_fsl0-slot0: Divider 250 for freq 400000 (base 200000000)
mmc0: Probing bus
mmc0: SD probe: failed
mmc0: MMC probe: failed
mmc0: Current OCR: 0x00000000
mmc0: No compatible cards found on bus
sdhci_fsl1-slot0: Divider 250 for freq 400000 (base 200000000)
mmc1: Probing bus
mmc1: SD 2.0 interface conditions: OK
mmc1: SD probe: OK (OCR: 0x40ff8000)
mmc1: Current OCR: 0x00ff8000
mmc1: Probing cards
mmc1: New card detected (CID 03534453533034478042c850a600f400)
mmc1: New card detected (CSD 400e00325b5900001d8a7f800a404000)
mmc1: Card at relative address 0xaaaa added:
mmc1: card: SDHC SS04G 8.0 SN 42C850A6 MFG 04/2015 by 3 SD
mmc1: bus: 4bit, 50MHz (high speed timing)
mmc1: memory: 7744512 blocks, erase sector 8192 blocks
mmc1: setting transfer rate to 50.000MHz (high speed timing)
sdhci_fsl1-slot0: Divider 2 for freq 50000000 (base 200000000)
mmcsd0: 4GB <SDHC SS04G 8.0 SN 42C850A6 MFG 04/2015 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
random: harvesting attach, 8 bytes (4 bits) from mmcsd0
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: new disk mmcsd0
arc4random: no preloaded entropy cache
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub0: 1 port with 1 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
uhub1: 1 port with 1 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub1
mmc1: setting bus width to 4 bits high speed timing
GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-42C850A6, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (ufsid/595173ec18c8477f, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (ufs/rootfs, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-42C850A6s2, BSD) is not aligned on 4194304 bytes
WARNING: /mnt/sd-ufs was not properly dismounted
Warning: bad time from time-of-day clock, system time will not be set accurately
start_init: trying /sbin/init
ugen1.2: <vendor 0x04b4 USB2.0 Hub> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x04b4 USB2.0 Hub, class 9/0, rev 2.00/32.99, addr 2> on usbus1
WARNING: / was not properly dismounted
uhub2: 4 ports with 4 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub2
random: unblocking device.
ffec0: link state changed to DOWN
ffec0: link state changed to UP
lock order reversal:
1st 0xdb254578 bufwait (bufwait) @ /usr/home/russellh/FreeBSD/rh-armv6/src/sys/ufs/ffs/ffs_vnops.c:280
2nd 0xc665fe1c snaplk (snaplk) @ /usr/home/russellh/FreeBSD/rh-armv6/src/sys/ufs/ffs/ffs_snapshot.c:2289
stack backtrace:
freebsd@imx6:~ % dmesg | grep ahci
ahci0: <i.MX6 Integrated AHCI controller> mem 0x2200000-0x2203fff irq 14 on simplebus0
Got to russells code.unknown: imx6_ahci_phy_addr: timeout on SATA_P0PHYCR_CR_CAP_ADDR=1
unknown: imx6_ahci_phy_write: error on imx6_ahci_phy_addr
ahci0: cannot reset PHY
device_attach: ahci0 attach returned 60
Comments