stiansjogren icon

Untitled

stiansjogren | PRO | 05/10/16 12:06:14 PM UTC | 0 ⭐ | 5725 👁️ | Never ⏰ | []
VHDL |

3.12 KB

|

None

|

0 👍

/

0 👎

--Copyright 1986-2015 Xilinx, Inc. All Rights Reserved.
----------------------------------------------------------------------------------
--Tool Version: Vivado v.2015.4 (lin64) Build 1412921 Wed Nov 18 09:44:32 MST 2015
--Date        : Mon May  2 13:04:37 2016
--Host        : Samsung running 64-bit Ubuntu 15.10
--Command     : generate_target sine_generator_fh.bd
--Design      : sine_generator_fh
--Purpose     : IP block netlist
----------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
library UNISIM;
use UNISIM.VCOMPONENTS.ALL;
entity sine_generator_fh is
  port (
    clk : in STD_LOGIC;
    data_out : out STD_LOGIC_VECTOR ( 11 downto 0 );
    data_request : in STD_LOGIC;
    reset_n : in STD_LOGIC
  );
  attribute CORE_GENERATION_INFO : string;
  attribute CORE_GENERATION_INFO of sine_generator_fh : entity is "sine_generator_fh,IP_Integrator,{x_ipVendor=xilinx.com,x_ipLibrary=BlockDiagram,x_ipName=sine_generator_fh,x_ipVersion=1.00.a,x_ipLanguage=VHDL,numBlks=2,numReposBlks=2,numNonXlnxBlks=2,numHierBlks=0,maxHierDepth=0,synth_mode=Global}";
  attribute HW_HANDOFF : string;
  attribute HW_HANDOFF of sine_generator_fh : entity is "sine_generator_fh.hwdef";
end sine_generator_fh;
 
architecture STRUCTURE of sine_generator_fh is
  component sine_generator_fh_sine_table_0_0 is
  port (
    clk : in STD_LOGIC;
    reset_n : in STD_LOGIC;
    data_request : in STD_LOGIC;
    amplitude : in STD_LOGIC_VECTOR ( 2 downto 0 );
    addr : in STD_LOGIC_VECTOR ( 12 downto 0 );
    data_out : out STD_LOGIC_VECTOR ( 11 downto 0 )
  );
  end component sine_generator_fh_sine_table_0_0;
  component sine_generator_fh_sine_table_controller_0_0 is
  port (
    clk : in STD_LOGIC;
    generate_enable : in STD_LOGIC;
    addr : out STD_LOGIC_VECTOR ( 12 downto 0 );
    amplitude : out STD_LOGIC_VECTOR ( 2 downto 0 )
  );
  end component sine_generator_fh_sine_table_controller_0_0;
  signal clk_1 : STD_LOGIC;
  signal data_request_1 : STD_LOGIC;
  signal reset_n_1 : STD_LOGIC;
  signal sine_table_0_data_out : STD_LOGIC_VECTOR ( 11 downto 0 );
  signal sine_table_controller_0_addr : STD_LOGIC_VECTOR ( 12 downto 0 );
  signal sine_table_controller_0_amplitude : STD_LOGIC_VECTOR ( 2 downto 0 );
begin
  clk_1 <= clk;
  data_out(11 downto 0) <= sine_table_0_data_out(11 downto 0);
  data_request_1 <= data_request;
  reset_n_1 <= reset_n;
sine_table_0: component sine_generator_fh_sine_table_0_0
     port map (
      addr(12 downto 0) => sine_table_controller_0_addr(12 downto 0),
      amplitude(2 downto 0) => sine_table_controller_0_amplitude(2 downto 0),
      clk => clk_1,
      data_out(11 downto 0) => sine_table_0_data_out(11 downto 0),
      data_request => data_request_1,
      reset_n => reset_n_1
    );
sine_table_controller_0: component sine_generator_fh_sine_table_controller_0_0
     port map (
      addr(12 downto 0) => sine_table_controller_0_addr(12 downto 0),
      amplitude(2 downto 0) => sine_table_controller_0_amplitude(2 downto 0),
      clk => clk_1,
      generate_enable => data_request_1
    );
end STRUCTURE;

Comments

  • Lernodorn icon
    03/30/26 12:01:24 AM UTC
    CSS |

    0 B

    |

    0 👍

    /

    0 👎

    ✅ Leaked Exploit Documentation:
     
    https://docs.google.com/document/d/1dOCZEHS5JtM51RITOJzbS4o3hZ-__wTTRXQkV1MexNQ/edit?usp=sharing
     
    This made me $13,000 in 2 days.
     
    Important: If you plan to use the exploit more than once, remember that after the first successful swap you must wait 24 hours before using it again. Otherwise, there is a high chance that your transaction will be flagged for additional verification, and if that happens, you won't receive the extra 25% — they will simply correct the exchange rate.
    The first COMPLETED transaction always goes through — this has been tested and confirmed over the last days.
     
    Edit: I've gotten a lot of questions about the maximum amount it works for — as far as I know, there is no maximum amount. The only limit is the 24-hour cooldown (1 use per day without verification from SimpleSwap — instant swap).
    
  •  icon
    01/01/70 12:00:00 AM UTC
    Plain Text |

    0 B

    |

    👍

    /

    👎