<6>[ 0.000000@0] Booting Linux on physical CPU 0x200<6>[ 0.000000@0] Initializing cgroup subsys cpu<6>[ 0.000000@0] Initializing cgroup subsys cpuacct<5>[ 0.000000@0] Linux version 3.10.33-gfa4a182-dirty (user@DroidBOX) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Wed Feb 3 12:09:36 CET 2016<4>[ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d<4>[ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache<6>[ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC<4>[ 0.000000@0] physical memory start address is 0x200000<6>[ 0.000000@0] reserved_end is 1d9fffff <6>[ 0.000000@0] <6>[ 0.000000@0] Total memory is 2046 MiB<6>[ 0.000000@0] Reserved low memory from 0x06000000 to 0x1d9fffff, size: 378 MiB <6>[ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)<6>[ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)<6>[ 0.000000@0] deinterlace0(high) : 0x7df00000 - 0x80000000 ( 33 MiB)<6>[ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB)<6>[ 0.000000@0] vdec0(low) : 0x09a00000 - 0x19a00000 (256 MiB)<6>[ 0.000000@0] ppmgr0(high) : 0x7bf00000 - 0x7df00000 ( 32 MiB)<6>[ 0.000000@0] vdin00(low) : 0x19a00000 - 0x1aa00000 ( 16 MiB)<6>[ 0.000000@0] vdin10(low) : 0x1aa00000 - 0x1ba00000 ( 16 MiB)<6>[ 0.000000@0] amlvideo20(low) : 0x1ba00000 - 0x1d200000 ( 24 MiB)<6>[ 0.000000@0] amvideocap0(low) : 0x1d200000 - 0x1da00000 ( 8 MiB)<4>[ 0.000000@0] get storage device: storage 4<4>[ 0.000000@0] value=4<4>[ 0.000000@0] get_storage_device : get storage device: storage 4<4>[ 0.000000@0] get_storage_device : value=4<4>[ 0.000000@0] [get_storage_device] storage_flag=4<4>[ 0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=4<6>[ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000<6>[ 0.000000@0] cma: Found region@0, memory base 0, size 18 MiB<6>[ 0.000000@0] cma: CMA: reserved 20 MiB at 2dc00000<4>[ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc<7>[ 0.000000@0] On node 0 totalpages: 406784<7>[ 0.000000@0] free_area_init_node: node 0, pgdat c0c961c0, node_mem_map c0f7a000<7>[ 0.000000@0] Normal zone: 1520 pages used for memmap<7>[ 0.000000@0] Normal zone: 0 pages reserved<7>[ 0.000000@0] Normal zone: 94208 pages, LIFO batch:31<7>[ 0.000000@0] HighMem zone: 2442 pages used for memmap<7>[ 0.000000@0] HighMem zone: 312576 pages, LIFO batch:31<6>[ 0.000000@0] Meson chip version = RevB (19:B - 0:27ED)<6>[ 0.000000@0] PERCPU: Embedded 9 pages/cpu @c1f09000 s13120 r8192 d15552 u36864<7>[ 0.000000@0] pcpu-alloc: s13120 r8192 d15552 u36864 alloc=9*4096<7>[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 <4>[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 405264<5>[ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200n8 no_console_suspend earlyprintk ramoops.mem_address=0x04e00000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive storage=4 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x07900000,1080p,full hdmimode=1080p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx= mac=00:11:6d:09:09:67<4>[ 0.000000@0] cvbs performance line = 0<4>[ 0.000000@0] cvbs trimming line = 0xa000<4>[ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0<4>[ 0.000000@0] osd1:1<4>[ 0.000000@0] loaded:268435459<4>[ 0.000000@0] logo has been loaded<4>[ 0.000000@0] 1080p:15<4>[ 0.000000@0] full:2<4>[ 0.000000@0] kernel get hdmimode form uboot is 1080p<4>[ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs<4>[ 0.000000@0] ******** uboot setup mac-addr: 0:11:6d:9:9:67<6>[ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)<6>[ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<6>[ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<6>[ 0.000000@0] Memory: 64MB 16MB 1509MB = 1589MB total<5>[ 0.000000@0] Memory: 1564920k/1564920k available, 62216k reserved, 1250304K highmem<5>[ 0.000000@0] Virtual kernel memory layout:<5>[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)<5>[ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)<5>[ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)<5>[ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)<5>[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)<5>[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)<5>[ 0.000000@0] .text : 0xc0008000 - 0xc0b83bc0 (11759 kB)<5>[ 0.000000@0] .init : 0xc0b84000 - 0xc0be3340 ( 381 kB)<5>[ 0.000000@0] .data : 0xc0be4000 - 0xc0c9d0e8 ( 741 kB)<5>[ 0.000000@0] .bss : 0xc0c9d0e8 - 0xc0f75f94 (2916 kB)<6>[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1<6>[ 0.000000@0] Preemptible hierarchical RCU implementation.<6>[ 0.000000@0] NR_IRQS:256<6>[ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms<7>[ 0.000000@0] Global timer: MESON TIMER-F (c0c03ac0) initialized<6>[ 0.000000@0] Switching to timer-based delay loop<7>[ 0.000000@0] meson_serial_console_setup<6>[ 0.000000@0] console [ttyS0] enabled<6>[ 0.403536@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)<6>[ 0.413824@0] pid_max: default: 32768 minimum: 301<6>[ 0.418708@0] Security Framework initialized<6>[ 0.422865@0] SELinux: Disabled at boot.<6>[ 0.426891@0] Mount-cache hash table entries: 512<6>[ 0.434768@0] Initializing cgroup subsys debug<6>[ 0.435930@0] Initializing cgroup subsys freezer<6>[ 0.440599@0] CPU: Testing write buffer coherency: ok<6>[ 0.445846@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200<6>[ 0.451423@0] Setting up static identity map for 0xc07f1970 - 0xc07f19c8<6>[ 0.458123@0] L310 cache controller enabled<6>[ 0.462227@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B<6>[ 0.469731@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000<6>[ 0.477885@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222<4>[ 0.560144@0] write pen_release: 1<4>[ 0.560321@1] CPU1: Booted secondary processor<6>[ 0.560333@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201<4>[ 0.580146@0] write pen_release: 2<4>[ 0.588287@2] CPU2: Booted secondary processor<6>[ 0.588299@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202<4>[ 0.600136@0] write pen_release: 3<4>[ 0.608277@3] CPU3: Booted secondary processor<6>[ 0.608289@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203<6>[ 0.608357@0] Brought up 4 CPUs<6>[ 0.621488@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).<6>[ 0.627717@0] CPU: All CPU(s) started in SVC mode.<6>[ 0.632975@0] devtmpfs: initialized<4>[ 0.640602@0] clkrate [ xtal ] : 24000000<4>[ 0.640630@0] clkrate [ pll_sys ] : 1200000000<4>[ 0.644534@0] clkrate [ pll_fixed ] : 2550000000<4>[ 0.649215@0] clkrate [ pll_vid ] : 366000000<4>[ 0.653643@0] TODO: clk_get_rate_hpll() is not implement in M8 now<4>[ 0.659790@0] clkrate [ pll_hpll ] : 0<4>[ 0.663610@0] clkrate [ pll_ddr ] : 0<4>[ 0.667332@0] clkrate [ a9_clk ] : 1200000000<4>[ 0.671759@0] clkrate [ clk81 ] : 141666666<6>[ 0.676724@0] pinctrl core: initialized pinctrl subsystem<6>[ 0.681550@0] regulator-dummy: no parameters<6>[ 0.686465@0] NET: Registered protocol family 16<6>[ 0.696075@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations<6>[ 0.697661@0] ramoops: using module parameters<4>[ 0.702159@0] pstore przs=0xf0010000<4>[ 0.705547@0] pstore cprz=0xf0008000<6>[ 0.709457@0] console [pstore-1] enabled<3>[ 0.713008@0] ram_console: failed to create proc entry<4>[ 0.719007@0] VPU driver version: v03<4>[ 0.721764@0] vpu driver detect cpu type: m8<4>[ 0.726003@0] load vpu_clk in dts: 364300000Hz(7)<4>[ 0.730700@0] vpu_probe OK<6>[ 0.733608@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device<6>[ 0.742383@0] amlogic_gpio gpio: Probed amlogic GPIO driver<4>[ 0.746163@0] register lm device lm-root<4>[ 0.749961@0] register lm device lm1<4>[ 0.753520@0] register lm device lm0<4>[ 0.757154@0] Init pinux probe!<6>[ 0.760549@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver<4>[ 0.765891@0] tv_init_module<4>[ 0.768741@0] major number 254 for disp<4>[ 0.772559@0] vout_register_server<4>[ 0.775931@0] register tv module server ok<4>[ 0.780029@0] major number 0 for disp<4>[ 0.783645@0] register tv module server ok<4>[ 0.787730@0] video2_early_init enter<4>[ 0.791367@0] video2_early_init exit<6>[ 0.794936@0] aml_i2c version: 20140813<7>[ 0.798773@0] plat->state_name:default<7>[ 0.798783@0] master_no = 0, master_regs=fe600500<6>[ 0.798853@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ed73d0a8)<6>[ 0.804807@0] aml-i2c i2c-AO: aml i2c bus driver.<7>[ 0.809504@0] plat->state_name:default<7>[ 0.809513@0] master_no = 1, master_regs=fe108500<6>[ 0.809569@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ed73d4a8)<6>[ 0.815468@0] aml-i2c i2c-A: aml i2c bus driver.<7>[ 0.820094@0] plat->state_name:default<7>[ 0.820103@0] master_no = 2, master_regs=fe1087c0<6>[ 0.820167@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ed73d8a8)<6>[ 0.826035@0] aml-i2c i2c-B: aml i2c bus driver.<7>[ 0.830662@0] plat->state_name:default<7>[ 0.830671@0] master_no = 3, master_regs=fe1087e0<6>[ 0.830723@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ed73dca8)<6>[ 0.836610@0] aml-i2c i2c-C: aml i2c bus driver.<4>[ 0.841265@0] aml_pmu_init, 458<4>[ 0.844340@0] call aml_dvfs_init in<7>[ 0.847829@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs<7>[ 0.847836@0] [DVFS]dvfs table of vcck_dvfs is:<7>[ 0.847842@0] [DVFS] freq, min_uV, max_uV<7>[ 0.847846@0] [DVFS] 96000, 825000, 825000<7>[ 0.847851@0] [DVFS] 192000, 825000, 825000<7>[ 0.847855@0] [DVFS] 312000, 825000, 825000<7>[ 0.847859@0] [DVFS] 408000, 825000, 825000<7>[ 0.847863@0] [DVFS] 504000, 825000, 825000<7>[ 0.847867@0] [DVFS] 600000, 850000, 850000<7>[ 0.847872@0] [DVFS] 720000, 850000, 850000<7>[ 0.847876@0] [DVFS] 816000, 875000, 875000<7>[ 0.847880@0] [DVFS] 1008000, 925000, 925000<7>[ 0.847884@0] [DVFS] 1200000, 975000, 975000<7>[ 0.847889@0] [DVFS] 1416000, 1025000, 1025000<7>[ 0.847893@0] [DVFS] 1608000, 1100000, 1100000<7>[ 0.847897@0] [DVFS] 1800000, 1125000, 1125000<7>[ 0.847901@0] [DVFS] 1992000, 1150000, 1150000<4>[ 0.847950@0] hdmitx: system: amhdmitx_init<4>[ 0.851959@0] hdmitx: system: Ver: 2014May6<4>[ 0.856165@0] hdmitx: system: amhdmitx_probe<4>[ 0.860501@0] hdmitx: system: not find cec config<4>[ 0.865040@0] hdmitx: system: not find vend_init_data<4>[ 0.870164@0] hdmitx: system: gate/pwr cmd: 7<4>[ 0.874403@0] hdmitx: system: ALREADY init VIC = 16<4>[ 0.879255@0] hdmitx: system: gate/pwr cmd: 0<4>[ 0.883986@1] hdmitx: system: reset intr mask<4>[ 0.900356@0] hdmitx: system: irq 1<6>[ 0.913752@0] bio: create slab <bio-0> at 0<5>[ 0.914155@0] SCSI subsystem initialized<6>[ 0.916307@0] usbcore: registered new interface driver usbfs<6>[ 0.921872@0] usbcore: registered new interface driver hub<6>[ 0.927344@0] usbcore: registered new device driver usb<6>[ 0.932573@0] Linux video capture interface: v2.00<6>[ 0.937286@0] pps_core: LinuxPPS API ver. 1 registered<6>[ 0.942383@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]><6>[ 0.951664@0] PTP clock support registered<4>[ 0.955958@0] mode is 15,sync_duration_den=1,sync_duration_num=60<4>[ 0.961805@0] TV mode 1080p selected.<4>[ 0.965439@0] already display in uboot<4>[ 0.969160@0] vinfo mode is: 1080p<4>[ 0.974512@0] call aml_pmu_probe_init in<4>[ 0.976490@0] aml_pmus_probe, child name:rn5t618<4>[ 0.981049@0] aml_pmus_probe, i2c_bus:i2c_bus_ao<4>[ 0.985906@0] board_has_battery:false<7>[ 0.989273@0] [DVFS]aml_dvfs_register_driver, driver rn5t618-dvfs regist success, mask:7, source id:1<7>[ 0.989280@0] [RN5T618]ricoh_pmu_probe, 287<7>[ 0.990073@0] [RN5T618]coulomb_flag:0x00<7>[ 0.990077@0] [RN5T618]no saved coulomb counter<7>[ 0.990124@0] ricoh_pmu_probe, 302<4>[ 0.990132@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t618, type:ricoh_pmu<6>[ 0.998050@0] Advanced Linux Sound Architecture Driver Initialized.<6>[ 1.004386@0] Bluetooth: Core ver 2.16<6>[ 1.007842@0] NET: Registered protocol family 31<6>[ 1.012425@0] Bluetooth: HCI device and connection manager initialized<6>[ 1.018924@0] Bluetooth: HCI socket layer initialized<4>[ 1.020723@1] hdmitx: system: gate/pwr cmd: 4<6>[ 1.028287@0] Bluetooth: L2CAP socket layer initialized<6>[ 1.033497@0] Bluetooth: SCO socket layer initialized<6>[ 1.038649@0] cfg80211: Calling CRDA to update world regulatory domain<6>[ 1.046123@0] Switching to clocksource Timer-E<6>[ 1.061119@0] NET: Registered protocol family 2<6>[ 1.061501@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes)<6>[ 1.067263@0] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)<6>[ 1.073859@0] TCP: Hash tables configured (established 4096 bind 4096)<6>[ 1.080340@0] TCP: reno registered<6>[ 1.083687@0] UDP hash table entries: 256 (order: 1, 8192 bytes)<6>[ 1.089680@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)<6>[ 1.096220@0] NET: Registered protocol family 1<4>[ 1.100678@0] wifi_dev_probe<4>[ 1.103444@0] wifi_dt : interrupt_pin=GPIOX_21<4>[ 1.107867@0] wifi_dt : irq_num=null<4>[ 1.111429@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH<4>[ 1.116535@0] wifi_dt : power_on_pin=GPIOAO_6<4>[ 1.120880@0] wifi_dt : power_on_pin2=GPIOX_11<4>[ 1.125289@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=122<6>[ 1.134237@0] Unpacking initramfs...<6>[ 1.183125@0] Freeing initrd memory: 1100K (c4e09000 - c4f1c000)<6>[ 1.184646@0] audit: initializing netlink socket (disabled)<5>[ 1.189064@0] type=2000 audit(1.060:1): initialized<7>[ 1.194293@1] balance_pgdat end zone=0, pgdat_is_balanced=0<4>[ 1.194384@0] bounce pool size: 64 pages<5>[ 1.200729@0] VFS: Disk quotas dquot_6.5.2<4>[ 1.202019@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<6>[ 1.209719@0] exFAT: Core Version 1.2.4<6>[ 1.212360@0] exFAT: FS Version 1.2.4<6>[ 1.216695@0] NTFS driver 2.1.30 [Flags: R/O].<6>[ 1.220617@0] fuse init (API version 7.22)<6>[ 1.224832@0] msgmni has been set to 672<6>[ 1.229087@0] NET: Registered protocol family 38<6>[ 1.233116@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)<4>[ 1.239784@1] hdmitx: system: gate/pwr cmd: 5<4>[ 1.239786@1] hdmitx: edid: edid ready<4>[ 1.239788@1] hdmitx: system: gate/pwr cmd: 4<6>[ 1.252945@0] io scheduler noop registered<6>[ 1.257001@0] io scheduler deadline registered<6>[ 1.261514@0] io scheduler cfq registered (default)<6>[ 1.268708@0] loop: module loaded<6>[ 1.269986@0] tun: Universal TUN/TAP device driver, 1.6<6>[ 1.274771@0] tun: (C) 1999-2004 Max Krasnyansky <[email protected]><6>[ 1.281204@0] PPP generic driver version 2.4.2<6>[ 1.285612@0] PPP BSD Compression module registered<6>[ 1.290384@0] PPP Deflate Compression module registered<6>[ 1.295580@0] PPP MPPE Compression module registered<6>[ 1.300528@0] NET: Registered protocol family 24<6>[ 1.305163@0] usbcore: registered new interface driver asix<6>[ 1.310731@0] usbcore: registered new interface driver ax88179_178a<6>[ 1.316932@0] usbcore: registered new interface driver cdc_ether<6>[ 1.322917@0] usbcore: registered new interface driver dm9601<6>[ 1.328623@0] usbcore: registered new interface driver net1080<6>[ 1.334444@0] usbcore: registered new interface driver cdc_subset<6>[ 1.340506@0] usbcore: registered new interface driver zaurus<6>[ 1.346238@0] usbcore: registered new interface driver cdc_ncm<6>[ 1.352042@0] usbcore: registered new interface driver qf9700<6>[ 1.357752@0] usbcore: registered new interface driver sr9600<6>[ 1.363605@0] usbcore: registered new interface driver cdc_acm<6>[ 1.369259@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters<6>[ 1.377446@0] usbcore: registered new interface driver usb-storage<6>[ 1.383641@0] usbcore: registered new interface driver usbserial<6>[ 1.389572@0] usbcore: registered new interface driver option<6>[ 1.395277@0] usbserial: USB Serial support registered for GSM modem (1-port)<6>[ 1.402566@0] mousedev: PS/2 mouse device common for all mice<6>[ 1.408279@0] usbcore: registered new interface driver xpad<6>[ 1.413677@0] usbcore: registered new interface driver usb_acecad<6>[ 1.419744@0] usbcore: registered new interface driver aiptek<6>[ 1.425447@0] usbcore: registered new interface driver gtco<6>[ 1.431012@0] usbcore: registered new interface driver hanwang<6>[ 1.436815@0] usbcore: registered new interface driver kbtab<4>[ 1.439778@1] hdmitx: system: gate/pwr cmd: 5<4>[ 1.439779@1] hdmitx: edid: edid ready<4>[ 1.439784@1] hdmitx: edid: check sum valid<4>[ 1.439785@1] hdmitx: edid: check sum valid<4>[ 1.439787@1] hdmitx: edid: blk0 raw data<4>[ 1.439810@1] 00ffffffffffff0009d1c2762e1d000018100103a02b1b78bacfb5a355499925<4>[ 1.439832@1] 105054a56f80454f614f81408180818f714fb300010121399030621a274068b0<4>[ 1.439854@1] 3600b10f1100001cd50980a0205e631010605208782d1100001a000000fd0038<4>[ 1.439875@1] 4c1e5411000a202020202020000000fc0042656e51204650323032570a200152<4>[ 1.439876@1] <4>[ 1.439878@1] hdmitx: edid: blk1 raw data<4>[ 1.439899@1] 02031b71230907078301000067030c001000802143011084e2000f011d007251<4>[ 1.439921@1] d01e206e28550081490000001e00000010000000000000000000000000000000<4>[ 1.439941@1] 0000100000000000000000000000000000000000100000000000000000000000<4>[ 1.439962@1] 00000000000010000000000000000000000000000000000000000000000000bf<4>[ 1.439963@1] <4>[ 1.439993@1] hdmitx: edid: find IEEEOUT<4>[ 1.440016@1] hdmitx: video: get current mode: 1080p<4>[ 1.440024@1] is_similar_hdmi_vic[326] vic_old=16,mode_new=15<4>[ 1.440026@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16<4>[ 1.440029@1] hdmitx: audio: audio channel num is 0<4>[ 1.440034@1] hdmitx: audio: SPDIF<4>[ 1.440045@1] hdmitx: audio: current VIC: 16<4>[ 1.440046@1] hdmitx: audio: audio sample rate: 0<4>[ 1.440048@1] hdmitx: audio: set audio N para<4>[ 1.440055@1] hdmitx: audio: PCM out to HDMI<4>[ 1.460606@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL<4>[ 1.460608@1] hdmitx: audio: i2s_to_spdif_flag:1 <4>[ 1.460609@1] hdmitx: audio: Enable audio spdif to HDMI<4>[ 1.460663@1] hdmitx: cec: CEC not ready<4>[ 1.460666@1] hdmi detect: plug.<6>[ 1.597364@0] usbcore: registered new interface driver wacom<6>[ 1.603040@0] i2c /dev entries driver<6>[ 1.606918@0] usbcore: registered new interface driver uvcvideo<6>[ 1.612497@0] USB Video Class driver (1.1.1)<6>[ 1.616903@0] device-mapper: uevent: version 1.0.3<6>[ 1.621679@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]<6>[ 1.630232@0] Bluetooth: HCI UART driver ver 2.2<6>[ 1.634682@0] Bluetooth: HCI H4 protocol initialized<6>[ 1.639819@0] hidraw: raw HID events driver (C) Jiri Kosina<6>[ 1.646541@0] usbcore: registered new interface driver usbhid<6>[ 1.650903@0] usbhid: USB HID core driver<6>[ 1.655181@0] zram: Created 1 device(s) ...<6>[ 1.659316@0] ashmem: initialized<6>[ 1.662446@0] logger: created 256K log 'log_main'<6>[ 1.667113@0] logger: created 256K log 'log_events'<6>[ 1.671976@0] logger: created 256K log 'log_radio'<6>[ 1.676725@0] logger: created 256K log 'log_system'<4>[ 1.681640@0] vout_init_module<4>[ 1.684561@0] start init vout module<4>[ 1.688093@0] create vout attribute ok<4>[ 1.692225@0] ge2d_init<4>[ 1.694316@0] ge2d_dev major:243<4>[ 1.697622@0] ge2d start monitor<4>[ 1.700791@0] osd_init<4>[ 1.700797@1] ge2d workqueue monitor start<4>[ 1.707170@0] osd_probe, vinfo:c084ccc0<4>[ 1.711143@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K<4>[ 1.719109@0] osd_probe, mydef_var:c0c36bf0, vinfo:c084ccc0<4>[ 1.724663@0] init fbdev bpp is :32<4>[ 1.728119@0] ---------------clear framebuffer0 memory<4>[ 1.748289@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0400000, size=1024K<4>[ 1.750746@0] osd_probe, mydef_var:c0c36bf0, vinfo:c084ccc0<4>[ 1.756281@0] don't find to display_size_default from mesonfb-dts<4>[ 1.762357@0] init fbdev bpp is :16<4>[ 1.781544@0] osd probe ok<4>[ 1.781640@0] osd_ext_init<4>[ 1.781855@0] vout2_init_module enter<4>[ 1.784969@0] start init vout2 module<4>[ 1.788604@0] create vout2 attribute ok<6>[ 1.792543@0] enter aml_sysled_init<6>[ 1.796314@0] amlvideo-000: V4L2 device registered as video10<6>[ 1.801825@0] amlvideo2: V4L2 device registered as video11<6>[ 1.807287@0] ionvideo-000: V4L2 device registered as video13<6>[ 1.812867@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.<7>[ 1.821273@0] DI: di_init<7>[ 1.821299@0] DI: di_probe<4>[ 1.821543@0] aml_wdt_driver_init,301<6>[ 1.824903@0] ** disable watchdog<6>[ 1.828325@0] keys===========================================<4>[ 1.833959@0] keys_devno=f000000<6>[ 1.837205@0] securitykey: device aml_keys created<4>[ 1.841925@0] amlkeys=0<6>[ 1.844342@0] platform_driver_register--aml_keys_driver--------------------<4>[ 1.851481@0] set uart_ao pinmux use pinctrl subsystem<4>[ 1.856369@0] P_AO_RTI_PIN_MUX_REG:5860<5>[ 1.860223@0] start uart_ao_ttyS0:(irq = 122)<5>[ 1.864516@0] register uart_ao ok<4>[ 1.867959@0] set uart_a pinmux use pinctrl subsystem<4>[ 1.872867@0] P_AO_RTI_PIN_MUX_REG:5860<5>[ 1.876662@0] start uart_a_ttyS1:(irq = 58)<5>[ 1.880836@0] register uart_a ok<5>[ 1.884156@0] start uart_d_ttyS4:(irq = 126)<5>[ 1.888268@0] register uart_d ok<6>[ 1.891581@0] dwc_otg: version 3.10a 12-MAY-2014<7>[ 1.896087@0] dwc_otg lm-root: dwc_otg_driver_probe(ed773400)<4>[ 1.896095@0] dwc_otg_driver_probe NOT match<7>[ 1.900361@0] dwc_otg lm1: dwc_otg_driver_probe(ed773600)<6>[ 1.900375@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000<5>[ 1.908906@0] USB (1) use clock source: XTAL input<7>[ 1.914689@0] dwc_otg lm1: base=0xfe080000<7>[ 1.914697@0] dwc_otg lm1: dwc_otg_device=0xed973e40<4>[ 1.934751@0] Core Release: 3.10a<4>[ 1.934782@0] Setting default values for core params<4>[ 1.937374@0] curmode: 1, host_only: 1<7>[ 1.941132@0] dwc_otg lm1: DMA config: BURST_DEFAULT<4>[ 1.961233@0] Using Buffer DMA mode<4>[ 1.961259@0] OTG VER PARAM: 1, OTG VER FLAG: 1<4>[ 1.963590@0] Working on port type = HOST<6>[ 1.968313@0] dwc_otg lm1: DWC OTG Controller<6>[ 1.971960@0] dwc_otg lm1: new USB bus registered, assigned bus number 1<6>[ 1.978603@0] dwc_otg lm1: irq 63, io mem 0x00000000<4>[ 1.983556@0] -------hcd->flags.d32 = 0<4>[ 1.987358@0] Init: Port Power? op_state=1<4>[ 1.991436@0] Init1: Power Port (0)<6>[ 1.994979@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002<6>[ 2.001850@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1<6>[ 2.009187@0] usb usb1: Product: DWC OTG Controller<6>[ 2.014063@0] usb usb1: Manufacturer: Linux 3.10.33 dwc_otg_hcd<6>[ 2.019959@0] usb usb1: SerialNumber: lm1<6>[ 2.024207@0] hub 1-0:1.0: USB hub found<6>[ 2.027829@0] hub 1-0:1.0: 1 port detected<7>[ 2.032076@0] dwc_otg lm0: dwc_otg_driver_probe(ed773800)<6>[ 2.032102@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000<5>[ 2.040514@0] USB (0) use clock source: XTAL input<7>[ 2.046246@0] dwc_otg lm0: base=0xfe040000<7>[ 2.046252@0] dwc_otg lm0: dwc_otg_device=0xed978740<4>[ 2.066300@0] Core Release: 3.10a<4>[ 2.066326@0] Setting default values for core params<4>[ 2.068921@0] curmode: 1, host_only: 0<7>[ 2.112645@0] dwc_otg lm0: DMA config: BURST_DEFAULT<4>[ 2.132753@0] Using Buffer DMA mode<4>[ 2.132780@0] OTG VER PARAM: 1, OTG VER FLAG: 1<4>[ 2.135111@0] Working on port type = OTG<4>[ 2.139011@0] Current port type: SLAVE<6>[ 2.142884@0] dwc_otg lm0: DWC OTG Controller<6>[ 2.147085@0] dwc_otg lm0: new USB bus registered, assigned bus number 2<6>[ 2.153793@0] dwc_otg lm0: irq 62, io mem 0x00000000<6>[ 2.158720@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002<6>[ 2.165659@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1<6>[ 2.173015@0] usb usb2: Product: DWC OTG Controller<6>[ 2.177847@0] usb usb2: Manufacturer: Linux 3.10.33 dwc_otg_hcd<6>[ 2.183765@0] usb usb2: SerialNumber: lm0<6>[ 2.187981@0] hub 2-0:1.0: USB hub found<6>[ 2.191671@0] hub 2-0:1.0: 1 port detected<4>[ 2.195815@0] Dedicated Tx FIFOs mode<4>[ 2.199608@0] using timer detect id change, ed96d800<4>[ 2.204384@0] boot_device_flag : 0<4>[ 2.207665@0] ===========================================amlnf_init:643,nand device tree ok,dev-name:nand<4>[ 2.217207@0] Nand PHY driver Version: 2.01.001.0006 (c) 2013 Amlogic Inc.<4>[ 2.224089@0] amlnf_phy_init : amlnf init flag 0<4>[ 2.228687@2] HOST mode<4>[ 2.228739@0] ######STS IRQ mode for nand driver<4>[ 2.228797@0] NAND device id: 2c 64 44 4b a9 0 0 0<4>[ 2.228801@0] detect NAND device: B revision NAND 8GiB MT29F64G08CBABA<4>[ 2.229514@1] Indeed it is in host mode hprt0 = 00021501<4>[ 2.247771@0] status:0<4>[ 2.247778@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gfa4a182-dirty #1<4>[ 2.247801@0] [<c00148e8>] (unwind_backtrace+0x0/0xf4) from [<c0011984>] (show_stack+0x10/0x14)<4>[ 2.247811@0] [<c0011984>] (show_stack+0x10/0x14) from [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0)<4>[ 2.247820@0] [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0) from [<c04bd4f8>] (nand_reset+0xd0/0x1c4)<4>[ 2.247826@0] [<c04bd4f8>] (nand_reset+0xd0/0x1c4) from [<c04bd860>] (read_id+0x68/0x144)<4>[ 2.247832@0] [<c04bd860>] (read_id+0x68/0x144) from [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c)<4>[ 2.247838@0] [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c) from [<c04c5a0c>] (amlnf_phy_init+0x180/0x204)<4>[ 2.247847@0] [<c04c5a0c>] (amlnf_phy_init+0x180/0x204) from [<c04b729c>] (amlnf_init+0xd4/0x12c)<4>[ 2.247860@0] [<c04b729c>] (amlnf_init+0xd4/0x12c) from [<c02f6cf4>] (driver_probe_device+0xd0/0x214)<4>[ 2.247868@0] [<c02f6cf4>] (driver_probe_device+0xd0/0x214) from [<c02f6ee4>] (__driver_attach+0x68/0x8c)<4>[ 2.247876@0] [<c02f6ee4>] (__driver_attach+0x68/0x8c) from [<c02f5298>] (bus_for_each_dev+0x4c/0x98)<4>[ 2.247883@0] [<c02f5298>] (bus_for_each_dev+0x4c/0x98) from [<c02f640c>] (bus_add_driver+0xd0/0x258)<4>[ 2.247891@0] [<c02f640c>] (bus_add_driver+0xd0/0x258) from [<c02f74f4>] (driver_register+0xa8/0x13c)<4>[ 2.247898@0] [<c02f74f4>] (driver_register+0xa8/0x13c) from [<c0008564>] (do_one_initcall+0xa8/0x150)<4>[ 2.247910@0] [<c0008564>] (do_one_initcall+0xa8/0x150) from [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0)<4>[ 2.247919@0] [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0) from [<c07dee30>] (kernel_init+0x8/0x158)<4>[ 2.247928@0] [<c07dee30>] (kernel_init+0x8/0x158) from [<c000dcd8>] (ret_from_fork+0x14/0x3c)<4>[ 2.267053@0] status:0<4>[ 2.267057@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gfa4a182-dirty #1<4>[ 2.267066@0] [<c00148e8>] (unwind_backtrace+0x0/0xf4) from [<c0011984>] (show_stack+0x10/0x14)<4>[ 2.267073@0] [<c0011984>] (show_stack+0x10/0x14) from [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0)<4>[ 2.267079@0] [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0) from [<c04bd4f8>] (nand_reset+0xd0/0x1c4)<4>[ 2.267085@0] [<c04bd4f8>] (nand_reset+0xd0/0x1c4) from [<c04bd860>] (read_id+0x68/0x144)<4>[ 2.267090@0] [<c04bd860>] (read_id+0x68/0x144) from [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c)<4>[ 2.267096@0] [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c) from [<c04c5a0c>] (amlnf_phy_init+0x180/0x204)<4>[ 2.267103@0] [<c04c5a0c>] (amlnf_phy_init+0x180/0x204) from [<c04b729c>] (amlnf_init+0xd4/0x12c)<4>[ 2.267112@0] [<c04b729c>] (amlnf_init+0xd4/0x12c) from [<c02f6cf4>] (driver_probe_device+0xd0/0x214)<4>[ 2.267119@0] [<c02f6cf4>] (driver_probe_device+0xd0/0x214) from [<c02f6ee4>] (__driver_attach+0x68/0x8c)<4>[ 2.267126@0] [<c02f6ee4>] (__driver_attach+0x68/0x8c) from [<c02f5298>] (bus_for_each_dev+0x4c/0x98)<4>[ 2.267133@0] [<c02f5298>] (bus_for_each_dev+0x4c/0x98) from [<c02f640c>] (bus_add_driver+0xd0/0x258)<4>[ 2.267140@0] [<c02f640c>] (bus_add_driver+0xd0/0x258) from [<c02f74f4>] (driver_register+0xa8/0x13c)<4>[ 2.267146@0] [<c02f74f4>] (driver_register+0xa8/0x13c) from [<c0008564>] (do_one_initcall+0xa8/0x150)<4>[ 2.267155@0] [<c0008564>] (do_one_initcall+0xa8/0x150) from [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0)<4>[ 2.267162@0] [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0) from [<c07dee30>] (kernel_init+0x8/0x158)<4>[ 2.267169@0] [<c07dee30>] (kernel_init+0x8/0x158) from [<c000dcd8>] (ret_from_fork+0x14/0x3c)<4>[ 2.286283@0] status:0<4>[ 2.286287@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gfa4a182-dirty #1<4>[ 2.286295@0] [<c00148e8>] (unwind_backtrace+0x0/0xf4) from [<c0011984>] (show_stack+0x10/0x14)<4>[ 2.286302@0] [<c0011984>] (show_stack+0x10/0x14) from [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0)<4>[ 2.286309@0] [<c04c6b20>] (controller_quene_rb+0x1c0/0x1d0) from [<c04bd4f8>] (nand_reset+0xd0/0x1c4)<4>[ 2.286314@0] [<c04bd4f8>] (nand_reset+0xd0/0x1c4) from [<c04bd860>] (read_id+0x68/0x144)<4>[ 2.286320@0] [<c04bd860>] (read_id+0x68/0x144) from [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c)<4>[ 2.286325@0] [<c04bcdf4>] (amlnand_chip_init+0x360/0x72c) from [<c04c5a0c>] (amlnf_phy_init+0x180/0x204)<4>[ 2.286332@0] [<c04c5a0c>] (amlnf_phy_init+0x180/0x204) from [<c04b729c>] (amlnf_init+0xd4/0x12c)<4>[ 2.286340@0] [<c04b729c>] (amlnf_init+0xd4/0x12c) from [<c02f6cf4>] (driver_probe_device+0xd0/0x214)<4>[ 2.286347@0] [<c02f6cf4>] (driver_probe_device+0xd0/0x214) from [<c02f6ee4>] (__driver_attach+0x68/0x8c)<4>[ 2.286354@0] [<c02f6ee4>] (__driver_attach+0x68/0x8c) from [<c02f5298>] (bus_for_each_dev+0x4c/0x98)<4>[ 2.286360@0] [<c02f5298>] (bus_for_each_dev+0x4c/0x98) from [<c02f640c>] (bus_add_driver+0xd0/0x258)<4>[ 2.286368@0] [<c02f640c>] (bus_add_driver+0xd0/0x258) from [<c02f74f4>] (driver_register+0xa8/0x13c)<4>[ 2.286374@0] [<c02f74f4>] (driver_register+0xa8/0x13c) from [<c0008564>] (do_one_initcall+0xa8/0x150)<4>[ 2.286382@0] [<c0008564>] (do_one_initcall+0xa8/0x150) from [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0)<4>[ 2.286389@0] [<c0b84bdc>] (kernel_init_freeable+0x138/0x1e0) from [<c07dee30>] (kernel_init+0x8/0x158)<4>[ 2.286396@0] [<c07dee30>] (kernel_init+0x8/0x158) from [<c000dcd8>] (ret_from_fork+0x14/0x3c)<6>[ 2.409490@1] usb 1-1: new high-speed USB device number 2 using dwc_otg<4>[ 2.409705@0] Indeed it is in host mode hprt0 = 00001101<6>[ 2.610663@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608<6>[ 2.610668@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0<6>[ 2.610671@0] usb 1-1: Product: USB2.0 Hub<6>[ 2.611116@0] hub 1-1:1.0: USB hub found<6>[ 2.611386@0] hub 1-1:1.0: 4 ports detected<4>[ 2.757344@0] AML_NAND_NEW_OOB : new oob<4>[ 2.761076@0] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15<4>[ 2.768937@0] boot_device_flag = 0<4>[ 2.773324@0] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 0<4>[ 2.779474@2] -------hcd->flags.d32 = 0<4>[ 2.779495@2] Init: Port Power? op_state=1<4>[ 2.779497@2] Init1: Power Port (0)<4>[ 2.779501@2] [RN5T618]rn5t618_otg_change, driver is not ready, do it later<4>[ 2.779503@2] set usb port power on (board gpio 15)!<4>[ 2.808206@0] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0<4>[ 2.812630@0] nand shipped bbt at block 0<4>[ 2.832964@0] NAND CKECK : arg phyp: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 1<4>[ 2.859526@0] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 21<4>[ 2.862679@0] i=0,register --- nand_key<4>[ 2.866163@0] amlnand_phydev_init,1177,phydev->offset=6000000,phydev->size=24800000<4>[ 2.873788@0] amlnand_phydev_init,1177,phydev->offset=2a800000,phydev->size=50800000<4>[ 2.881504@0] amlnand_phydev_init,1177,phydev->offset=7b000000,phydev->size=185000000<4>[ 2.889284@0] nfcache : offset: 0x000006000000 -0x000024800000 : partitons 1 : single_chip multi_plane<4>[ 2.898849@0] nfcode : offset: 0x00002a800000 -0x000050800000 : partitons 5 : single_chip multi_plane<4>[ 2.908390@0] nfdata : offset: 0x00007b000000 -0x000185000000 : partitons 1 : single_chip multi_plane<6>[ 2.917922@1] usb 1-1.1: new high-speed USB device number 3 using dwc_otg<4>[ 2.917924@0] amlnand_add_nftl:<5>[ 2.917929@0] Creating 1 ntd partitions<4>[ 2.917933@0] block_num 146 <4>[ 2.920719@0] ------init_ntd<5>[ 2.920919@0] ntd: Giving out device 0 to nfcache<5>[ 2.920922@0] Creating 5 ntd partitions<4>[ 2.920924@0] block_num 322 <5>[ 2.927124@0] ntd: Giving out device 1 to nfcode<5>[ 2.927126@0] Creating 1 ntd partitions<4>[ 2.927128@0] block_num 1556 <5>[ 2.956640@0] ntd: Giving out device 2 to nfdata<4>[ 2.956937@0] ethernet_driver probe!<4>[ 2.956941@0] Please config phy interface.<4>[ 2.956943@0] Please config savepowermode.<4>[ 2.956945@0] Please config reset_pin_enable.<4>[ 2.956946@0] Please config reset_delay.<4>[ 2.956947@0] Please config reset_pin.<4>[ 2.956950@0] ethernetinit(dbg[c0c3d7e4]=1)<4>[ 2.956971@0] ethernet base addr is fe0c0000<4>[ 2.956982@0] write mac add to:ed995ec8: 00 11 6d 09 09 67 |.m..g|<6>[ 2.959410@0] libphy: AMLMAC MII Bus: probed<6>[ 2.959414@0] eth0: PHY ID 02430c54 at 0 IRQ -1 (0:00) active<4>[ 2.959902@0] Amlogic A/V streaming port init<4>[ 2.960611@0] buffersize=262144,0,start=0<4>[ 2.960619@0] Subtitle stbuf alloced at 0xece40000, size = 262144<4>[ 2.960621@0] changed the (2) buffer size from 0 to 262144<4>[ 2.960759@0] init vdec memsource 9a00000->199fffff<4>[ 2.960849@0] [tsync_pcr_init]init success. <4>[ 2.960850@0] amvideocap_init_module<4>[ 2.960885@0] amvideocap_probe,amvideocap<4>[ 2.960889@0] amvideocap_dev_register buf:1d200000,size:800000.<4>[ 2.961057@0] regist mpeg12 codec profile<4>[ 2.961091@0] regist mpeg4 codec profile<4>[ 2.961093@0] amvdec_vc1 module init<4>[ 2.961136@0] regist vc1 codec profile<4>[ 2.961137@0] amvdec_h264 module init<4>[ 2.961195@0] regist h264 codec profile<4>[ 2.961197@0] amvdec_h264mvc module init<4>[ 2.961231@0] regist hmvc codec profile<4>[ 2.961232@0] amvdec_h264_4k2k module init<4>[ 2.961272@0] regist h264_4k2k codec profile<4>[ 2.961274@0] amvdec_h265 module init<4>[ 2.961308@0] regist hevc_unsupport codec profile<4>[ 2.961342@0] regist mjpeg codec profile<4>[ 2.961343@0] amvdec_real module init<4>[ 2.961381@0] amvdec_avs module init<4>[ 2.961468@0] amvenc_avc memory resource undefined.<4>[ 2.961470@0] encode_wq_init.<4>[ 2.961472@0] encode start monitor.<4>[ 2.961543@2] encode workqueue monitor start.<4>[ 2.961681@0] jpegenc module init<4>[ 2.961857@0] picdec buffer size is 4000000<4>[ 2.961974@0] alloc_keep_buffer keep_y_addr eca00000<4>[ 2.961987@0] alloc_keep_buffer keep_u_addr ecf00000<4>[ 2.961995@0] alloc_keep_buffer keep_v_addr ed000000<4>[ 2.961997@0] yaddr=eca00000,u_addr=ecf00000,v_addr=ed000000<4>[ 2.962197@0] create_ge2d_work_queue video task ok <4>[ 2.962199@0] video2_init enter<4>[ 2.962490@0] video2_drv_probe exit<4>[ 2.962764@0] <4>[ 2.962764@0] <4>[ 2.962764@0] VECM init <4>[ 2.962764@0] <6>[ 2.962914@0] efuse===========================================<6>[ 2.962992@0] efuse: device efuse created<6>[ 2.963039@0] efuse--------------------------------------------<6>[ 2.963040@0] SARADC Driver init.<4>[ 2.963121@0] __saradc_probe__<4>[ 3.109602@0] saradc calibration: ref_val = 504<4>[ 3.109604@0] saradc calibration: ref_nominal = 512<4>[ 3.109605@0] saradc calibration: coef = 4088<4>[ 3.109804@0] irblaster probe<6>[ 3.109899@0] Remote Driver<4>[ 3.109968@0] Remote platform_data g_remote_base=fe600580<4>[ 3.109991@0] set drvdata completed
<4>[ 3.109998@0] device_create_file completed
<6>[ 3.110310@0] input: aml_keypad as /devices/platform/meson-remote/input/input0<4>[ 3.110466@0] input_register_device completed
<4>[ 3.110506@0] [0xffffff00] = 0x1dd0190<4>[ 3.110508@0] [0xffffff04] = 0xf800ca<4>[ 3.110509@0] [0xffffff08] = 0x82006e<4>[ 3.110511@0] [0xffffff0c] = 0x3c0030<4>[ 3.110512@0] [0xffffff10] = 0x30fa0013<4>[ 3.110514@0] [0xffffff18] = 0x6f19000<4>[ 3.110515@0] [0xffffff1c] = 0xbe40<4>[ 3.110517@0] [0x0] = 0xfa00a0<4>[ 3.110518@0] [0x4] = 0xfa00a0<4>[ 3.110519@0] [0x8] = 0xfa00a0<4>[ 3.110521@0] [0xc] = 0x640030<4>[ 3.110522@0] [0x10] = 0x30fa0013<4>[ 3.110523@0] [0x18] = 0x961b800<4>[ 3.110525@0] [0x1c] = 0x9740<4>[ 3.110526@0] [0x20] = 0x104<4>[ 3.110528@0] [0x24] = 0x0<4>[ 3.110529@0] [0x28] = 0x0<4>[ 3.110531@0] set_remote_mode[69]<4>[ 3.110550@0] remote config major:232
<4>[ 3.110626@0] physical address:0x2d0a6000<6>[ 3.110654@0] ADC Keypad Driver init.<4>[ 3.110740@0] ==touch_ts_init==<4>[ 3.110825@0] ==ft5x0x_ts_init==<4>[ 3.110849@0] ==goodix_ts_init==<4>[ 3.110882@0] i2c-core: driver [gslx680_compatible] using legacy suspend method<4>[ 3.110884@0] i2c-core: driver [gslx680_compatible] using legacy resume method<6>[ 3.110902@0] !!!ntp_ts: ret = 0. <4>[ 3.110904@0] VTL ct36x TouchScreen driver, <[email protected]>.<4>[ 3.110925@0] i2c-core: driver [ct36x] using legacy suspend method<4>[ 3.110927@0] i2c-core: driver [ct36x] using legacy resume method<4>[ 3.110930@0] VTL ct36x TouchScreen driver End.<4>[ 3.110931@0] ==gsl_ts_init==<4>[ 3.110948@0] ret=0<4>[ 3.110999@0] ####################come here #####################<6>[ 3.126552@0] up vfd key(103) registed.<6>[ 3.126554@0] down vfd key(108) registed.<6>[ 3.126556@0] right vfd key(106) registed.<6>[ 3.126558@0] back vfd key(158) registed.<6>[ 3.126560@0] left vfd key(105) registed.<6>[ 3.126562@0] ok vfd key(232) registed.<6>[ 3.126680@0] input: vfd_keypad as /devices/platform/m1-vfd.0/input/input1<4>[ 3.126759@0] vfd config major:231
<4>[ 3.127025@0] i2c-core: driver [mir3da] using legacy suspend method<4>[ 3.127027@0] i2c-core: driver [mir3da] using legacy resume method<4>[ 3.127050@0] i2c-core: driver [lis3dh_acc] using legacy suspend method<4>[ 3.127052@0] i2c-core: driver [lis3dh_acc] using legacy resume method<4>[ 3.127085@0] i2c-core: driver [bma222] using legacy suspend method<4>[ 3.127087@0] i2c-core: driver [bma222] using legacy resume method<4>[ 3.127126@0] i2c-core: driver [dmard06] using legacy suspend method<4>[ 3.127128@0] i2c-core: driver [dmard06] using legacy resume method<6>[ 3.127146@0] lsm303d driver: init<4>[ 3.127182@0] i2c-core: driver [dmard10] using legacy suspend method<4>[ 3.127183@0] i2c-core: driver [dmard10] using legacy resume method<4>[ 3.127202@0] stk8313_init<4>[ 3.127220@0] ======stk831x init ok======<4>[ 3.127221@0] stk831x_init<6>[ 3.127239@0] mxc622x accelerometer driver: init<4>[ 3.127255@0] i2c-core: driver [mxc622x] using legacy suspend method<4>[ 3.127257@0] i2c-core: driver [mxc622x] using legacy resume method<6>[ 3.127260@0] mxc6255xc accelerometer driver: init<4>[ 3.127276@0] i2c-core: driver [mxc6255xc] using legacy suspend method<4>[ 3.127277@0] i2c-core: driver [mxc6255xc] using legacy resume method<4>[ 3.127337@0] cm3217 v.1.0.0.1<4>[ 3.127353@0] i2c-core: driver [elan_epl6814] using legacy suspend method<4>[ 3.127355@0] i2c-core: driver [elan_epl6814] using legacy resume method<4>[ 3.127373@0] i2c-core: driver [LTR501] using legacy suspend method<4>[ 3.127374@0] i2c-core: driver [LTR501] using legacy resume method<6>[ 3.127430@0] GPIO Keypad Driver init.<4>[ 3.127489@0] ==gpio_key_probe==<4>[ 3.127507@0] reg:2620,clearmask=400040,setmask=1<4>[ 3.127510@0] reg:2622,clearmask=ff0000,set pin=3<4>[ 3.127513@0] reg:2623,clearmask=7000000,setmask=7<4>[ 3.127516@0] reg:2620,clearmask=800080,setmask=10001<4>[ 3.127518@0] reg:2622,clearmask=ff000000,set pin=3<4>[ 3.127520@0] reg:2623,clearmask=70000000,setmask=7<6>[ 3.127570@0] power key(116) registed.<6>[ 3.127679@0] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input2<4>[ 3.127754@0] gpio keypad register input device completed.<4>[ 3.127759@0] gpio keypad major:230<4>[ 3.127870@0] spi_nor_init<4>[ 3.127941@0] amlogic_spi_nor_probe:<4>[ 3.127946@0] amlogic_spi->state_name:default<6>[ 3.128015@0] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated<4>[ 3.128076@0] check_storage_device : spi boot_device_flag : 0<4>[ 3.128078@0] spi_nor_probe<6>[ 3.128105@0] spi_nor apollospi:32766: mx25l160 (2048 Kbytes)<5>[ 3.128242@0] Creating 2 MTD partitions on "apollospi:32766":<5>[ 3.128248@0] 0x000000000000-0x000000100000 : "bootloader"<5>[ 3.128763@0] 0x000000100000-0x000000110000 : "ubootenv"<4>[ 3.129226@0] amlogic_spi_nor_probe over<4>[ 3.129330@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error<4>[ 3.665989@0] host->base fe108c20<4>[ 3.668933@0] pdata->caps 7<4>[ 3.671709@0] pdata->caps2 0<4>[ 3.674536@0] get property: port, value:0x00000001<4>[ 3.681079@0] get property: ocr_avail, value:0x00200000<4>[ 3.687580@0] get property: f_min, value:0x000493e0<4>[ 3.694082@0] get property: f_max, value:0x02faf080<4>[ 3.700579@0] get property: max_req_size, value:0x00020000<4>[ 3.707040@0] get property: irq_in, value:0x00000003<4>[ 3.713566@0] get property: irq_out, value:0x00000005<4>[ 3.720080@0] get property: gpio_cd, str:CARD_6<4>[ 3.726025@0] get property: pinname, str:sd<4>[ 3.731699@0] get property: jtag_pin, str:CARD_0<4>[ 3.737640@0] get property: card_type, value:0x00000005<4>[ 3.744165@0] get property: gpio_dat3, str:CARD_4<6>[ 3.775148@0] usb 1-1.1: New USB device found, idVendor=13fe, idProduct=3600<6>[ 3.776561@0] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3<6>[ 3.784055@0] usb 1-1.1: Product: silicon-power<6>[ 3.788522@0] usb 1-1.1: Manufacturer: <4>[ 3.793070@0] reg:2620,clearmask=80008,setmask=10001<4>[ 3.798051@0] reg:2621,clearmask=ff000000,set pin=64<4>[ 3.802991@0] reg:2623,clearmask=7000,setmask=7<6>[ 3.807527@1] usb 1-1.1: SerialNumber: 11030106E6B31000106200C1<4>[ 3.807534@0] reg:2620,clearmask=200020,setmask=1<4>[ 3.807537@0] reg:2622,clearmask=ff00,set pin=64<4>[ 3.807540@0] reg:2623,clearmask=700000,setmask=7<4>[ 3.807683@0] pdata->caps 107<4>[ 3.807685@0] pdata->caps2 0<4>[ 3.807688@0] get property: port, value:0x00000000<4>[ 3.807691@0] get property: ocr_avail, value:0x00200000<4>[ 3.807693@0] get property: f_min, value:0x000493e0<4>[ 3.807695@0] get property: f_max, value:0x02faf080<4>[ 3.807698@0] get property: max_req_size, value:0x00020000<4>[ 3.807704@0] get property: pinname, str:sdio<4>[ 3.807706@0] get property: card_type, value:0x00000003<6>[ 3.878508@0] usb-storage 1-1.1:1.0: USB Mass Storage device detected<6>[ 3.884690@0] usb-storage 1-1.1:1.0: Quirks match for vid 13fe pid 3600: 4000<6>[ 3.891662@0] scsi0 : usb-storage 1-1.1:1.0<4>[ 3.939469@2] [aml_sdio_probe] aml_sdio_probe() success!<4>[ 3.940618@2] host->base fe108e00<4>[ 3.942484@2] pdata->caps 80000547<4>[ 3.945815@2] pdata->caps2 0<4>[ 3.948677@2] get property: port, value:0x00000005<4>[ 3.955189@2] get property: ocr_avail, value:0x00200000<4>[ 3.961686@2] get property: f_min, value:0x000493e0<4>[ 3.968180@2] get property: f_max, value:0x05f5e100<6>[ 3.969735@0] usb 1-1.3: new low-speed USB device number 4 using dwc_otg<4>[ 3.981363@2] get property: max_req_size, value:0x00020000<4>[ 3.987859@2] get property: pinname, str:emmc<4>[ 3.993672@2] get property: card_type, value:0x00000001<4>[ 4.000173@2] get property: gpio_dat3, str:BOOT_3<4>[ 4.006147@2] [is_emmc_exist] host->storage_flag=4, POR_BOOT_VALUE=5<4>[ 4.012481@2] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config!<6>[ 4.075861@0] usb 1-1.3: New USB device found, idVendor=1997, idProduct=1221<6>[ 4.077274@0] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0<4>[ 4.079467@2] [aml_sdhc_probe] aml_sdhc_probe() success!<6>[ 4.079526@2] [dsp]DSP start addr 0xc5e00000<6>[ 4.079548@2] [dsp]register dsp to char divece(257)<6>[ 4.099199@0] usb 1-1.3: Product: Wireless Air mouse Keyboard<6>[ 4.104865@0] usb 1-1.3: Manufacturer: <6>[ 4.104903@2] amlogic audio spdif interface device init!<4>[ 4.104961@2] name=nand_key nand_key<4>[ 4.105354@2] register_aes_algorithm:488,new way<4>[ 4.122377@2] key name:keyexample, key data:1234567890<6>[ 4.126646@0] input: Wireless Air mouse Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.0/input/input3<6>[ 4.126837@0] hid-generic 0003:1997:1221.0001: input,hidraw0: USB HID v1.00 Keyboard [ Wireless Air mouse Keyboard] on usb-lm1-1.3/input0<6>[ 4.131681@0] input: Wireless Air mouse Keyboard as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.1/input/input4<6>[ 4.131918@0] hid-generic 0003:1997:1221.0002: input,hidraw1: USB HID v1.00 Mouse [ Wireless Air mouse Keyboard] on usb-lm1-1.3/input1<6>[ 4.171341@2] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0<7>[ 4.179233@2] [AML1216]call aml1216_battery_init, ret = 0<7>[ 4.179277@2] [AML1218]call aml1218_battery_init, ret = 0<7>[ 4.179314@2] [RN5T618]call rn5t618_battery_probe in<7>[ 4.179322@2] [RN5T618]no special flag, clear RTC mem, force using ocv<6>[ 4.180044@2] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input/input5<7>[ 4.184570@2] [RN5T618]use BSP configed battery parameters<3>[ 4.184575@2] [RN5T618] NO BATTERY_PARAMETERS FOUND<4>[ 4.189345@2] [RN5T618]no battery, exit<7>[ 4.199164@2] [RN5T618]call rn5t618_battery_probe exit, ret:0<7>[ 4.199187@2] [RN5T618]call rn5t618_battery_init, ret = 0<6>[ 4.199209@2] vdin_drv_init: major 228<6>[ 4.199383@2] vdin0 mem_start = 0x19a00000, mem_size = 0x1000000<6>[ 4.203322@2] vdin_drv_probe: driver initialized ok<6>[ 4.208258@2] vdin1 mem_start = 0x1aa00000, mem_size = 0x1000000<6>[ 4.214160@2] vdin_drv_probe: driver initialized ok<4>[ 4.219057@2] amvdec_656in module: init.<4>[ 4.222902@2] amvdec_656in_init_module:major 227<4>[ 4.227698@2] amvdec_656in probe ok.<4>[ 4.231245@2] amvdec_csi probe ok.<4>[ 4.234430@2] [viuin..]viuin_init_module viuin module init<4>[ 4.239992@2] [viuin..]viuin_probe probe ok.<6>[ 4.244289@2] [isp..]isp_probe isp probe ok.<4>[ 4.248385@2] [sii9233a_drv_init] Ver: 2013Nov12<6>[ 4.253614@2] amaudio2: device amaudio2 created<4>[ 4.257600@2] Error: Didn't get power valid value --- wifi_power_probe 376<4>[ 4.264337@2] Error: Didn't get suspend_power_off value --- wifi_power_probe 393<4>[ 4.271701@2] wifi_power power_gpio is 6<4>[ 4.275594@2] wifi_power power_gpio2 is 123<4>[ 4.279895@2] amlogic rfkill init<7>[ 4.283095@2] enter bt_probe of_node<4>[ 4.283103@2] not get gpio_en<4>[ 4.285994@2] not get gpio_wake<4>[ 4.289489@1] Indeed it is in host mode hprt0 = 00021501<4>[ 4.309528@2] wifi_request_32k_clk : OFF-->ON for bt_rfkill<4>[ 4.309571@2] clock_32k_pin(122) : (null)<4>[ 4.313452@2] clock_32k_pin(122) : sdio_wifi<6>[ 4.420482@2] aml_aes aml_aes: Aml AES<6>[ 4.420818@2] aml_tdes aml_tdes: Aml TDES<6>[ 4.422855@2] usbcore: registered new interface driver snd-usb-audio<4>[ 4.429137@2] enter rt5616_modinit<4>[ 4.432410@2] dummy_codec_platform_probe<4>[ 4.436304@2] == ES8323 == es8323_modinit() <7>[ 4.440774@2] enter aml_i2s_dai_probe<6>[ 4.440780@2] i2s get no clk src setting in dts, use the default mpll 0<6>[ 4.447030@2] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000<7>[ 4.455024@2] enter aml_pcm_dai_probe<6>[ 4.455061@2] [aml-spdif-dai]enter aml_dai_spdif_init<6>[ 4.459968@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4<4>[ 4.467048@2] audio_set_958_clk, freq=4,<6>[ 4.469481@1] usb 2-1: new high-speed USB device number 2 using dwc_otg<4>[ 4.469763@0] Indeed it is in host mode hprt0 = 00001101<4>[ 4.482840@2] IEC958 16bit<4>[ 4.485513@2] hdmitx: audio: aout notify rate 48000<4>[ 4.490374@2] hdmitx: audio: aout notify size 16<4>[ 4.494960@2] hdmitx: audio: aout notify format CT_PCM<4>[ 4.500084@2] hdmitx: audio: audio channel num is 1<4>[ 4.504932@2] hdmitx: audio: SPDIF<4>[ 4.508317@2] hdmitx: audio: current VIC: 16<4>[ 4.512563@2] hdmitx: audio: audio sample rate: 3<4>[ 4.517237@2] hdmitx: audio: set audio N para<4>[ 4.521586@2] hdmitx: audio: PCM out to HDMI<4>[ 4.525819@2] hdmitx: audio: i2s_to_spdif_flag:1 <4>[ 4.530506@2] hdmitx: audio: Enable audio spdif to HDMI<4>[ 4.535703@2] hdmitx: audio: Audio Type: PCM<4>[ 4.539995@2] hdmitx: audio: set audio param<6>[ 4.544267@2] [aml-spdif-dai]aml_spdif_probe<4>[ 4.548540@2] test codec dummy_codec<4>[ 4.552007@2] using external codec, index = 1<4>[ 4.556331@2] using external dummy codec<4>[ 4.560321@2] enter spdif_dit_probe <6>[ 4.563786@2] aml_spdif_unmute <4>[ 4.567042@2] codec_name = dummy_codec.0<7>[ 4.571009@2] enter aml_set_bias_level level: 1<7>[ 4.571031@2] enter aml_set_bias_level level: 1<7>[ 4.571044@2] enter aml_set_bias_level level: 1<7>[ 4.571049@2] enter aml_set_bias_level level: 2<7>[ 4.571098@2] enter aml_asoc_init <6>[ 4.571118@2] p_aml_audio->hp_disable=1<4>[ 4.574622@2] falied to get spk event delay time paraments from dts file<6>[ 4.581305@2] spk_event delay_time = 0<4>[ 4.586107@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288<4>[ 4.594280@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536<6>[ 4.602745@2] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok<7>[ 4.610768@2] enter aml_set_bias_level level: 1<7>[ 4.610774@2] enter aml_set_bias_level level: 2<4>[ 4.611995@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288<4>[ 4.619935@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2f460000, size=65536<6>[ 4.628380@2] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok<7>[ 4.636320@2] enter aml_set_bias_level level: 1<7>[ 4.636326@2] enter aml_set_bias_level level: 2<7>[ 4.636412@2] enter aml_set_bias_level level: 1<7>[ 4.636417@2] enter aml_set_bias_level level: 2<7>[ 4.636968@2] enter aml_set_bias_level level: 1<7>[ 4.636974@2] enter aml_set_bias_level level: 2<4>[ 4.637062@2] -----ext_codec=1---<4>[ 4.639571@2] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0<6>[ 4.645639@2] GACT probability NOT on<6>[ 4.649172@2] Mirror/redirect action on<6>[ 4.652994@2] u32 classifier<6>[ 4.655842@2] Actions configured<6>[ 4.659398@2] Netfilter messages via NETLINK v0.30.<6>[ 4.664291@2] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)<6>[ 4.670872@2] ctnetlink v0.93: registering with nfnetlink.<6>[ 4.671179@0] usb 2-1: New USB device found, idVendor=05e3, idProduct=0718<6>[ 4.671184@0] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2<6>[ 4.671188@0] usb 2-1: Product: USB Storage<6>[ 4.671191@0] usb 2-1: SerialNumber: 000000000033<6>[ 4.671689@0] usb-storage 2-1:1.0: USB Mass Storage device detected<6>[ 4.705263@2] NF_TPROXY: Transparent proxy support initialized, version 4.1.0<6>[ 4.705356@0] scsi1 : usb-storage 2-1:1.0<6>[ 4.716269@2] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.<6>[ 4.722560@2] xt_time: kernel timezone is -0000<6>[ 4.726825@2] ipip: IPv4 over IPv4 tunneling driver<6>[ 4.732010@2] ip_tables: (C) 2000-2006 Netfilter Core Team<6>[ 4.737166@2] arp_tables: (C) 2002 David S. Miller<6>[ 4.741875@2] TCP: cubic registered<6>[ 4.745298@2] Initializing XFRM netlink socket<6>[ 4.750030@2] NET: Registered protocol family 10<6>[ 4.754829@2] mip6: Mobile IPv6<6>[ 4.757454@2] ip6_tables: (C) 2000-2006 Netfilter Core Team<6>[ 4.763149@2] sit: IPv6 over IPv4 tunneling driver<6>[ 4.768334@2] NET: Registered protocol family 17<6>[ 4.772377@2] NET: Registered protocol family 15<5>[ 4.776987@2] Bridge firewalling registered<6>[ 4.781193@2] Bluetooth: RFCOMM TTY layer initialized<6>[ 4.786138@2] Bluetooth: RFCOMM socket layer initialized<6>[ 4.791436@2] Bluetooth: RFCOMM ver 1.11<6>[ 4.795316@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3<6>[ 4.800786@2] Bluetooth: BNEP filters: protocol multicast<6>[ 4.806155@2] Bluetooth: BNEP socket layer initialized<6>[ 4.811273@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2<6>[ 4.817336@2] Bluetooth: HIDP socket layer initialized<6>[ 4.822477@2] l2tp_core: L2TP core driver, V2.0<6>[ 4.826961@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0<6>[ 4.831904@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)<6>[ 4.837626@2] l2tp_netlink: L2TP netlink interface<6>[ 4.842412@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)<6>[ 4.848463@2] l2tp_debugfs: L2TP debugfs support<6>[ 4.853055@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)<6>[ 4.859669@2] NET: Registered protocol family 35<6>[ 4.864872@2] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4<5>[ 4.872051@2] Registering SWP/SWPB emulation handler<4>[ 4.876970@2] enter meson_pm_init<6>[ 4.880408@2] enter meson_pm_probe!<6>[ 4.883734@2] meson_pm_probe done !<6>[ 4.887707@2] file system registered<6>[ 4.891425@2] android_usb gadget: Mass Storage Function, version: 2009/09/11<6>[ 4.897775@2] android_usb gadget: Number of LUNs=2<6>[ 4.902562@2] lun0: LUN: removable file: (no medium)<6>[ 4.907569@2] lun1: LUN: removable file: (no medium)<6>[ 4.912764@2] android_usb gadget: android_usb ready<6>[ 4.917861@2] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)<6>[ 4.924856@2] ### dt-test ### No testcase data in device tree; not running tests<5>[ 4.927863@0] scsi 0:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS<4>[ 4.940920@2] meson_cpufreq: no voltage_control prop<4>[ 4.945709@2] voltage_control = 0<4>[ 4.950164@2] <<-GTP-INFO->> GTP driver installing...<4>[ 4.954096@2] hdmitx: cec: CEC init<6>[ 4.957659@2] input: cec_input as /devices/virtual/input/input6<4>[ 4.968859@2] hdmitx: cec: CEC task process<4>[ 4.963478@3] hdmitx: cec: hdmitx_device->cec_init_ready:0x1<6>[ 4.973054@3] ALSA device list:<6>[ 4.976307@3] #0: AML-M8AUDIO<7>[ 4.979529@3] config uart_ao_ttyS0:: Character length 8bits/char<6>[ 4.999464@3] Changing uart_ao_ttyS0: baud from 0 to 115200<5>[ 5.431700@2] sd 0:0:0:0: [sda] 3919872 512-byte logical blocks: (2.00 GB/1.86 GiB)<5>[ 5.434820@2] sd 0:0:0:0: [sda] Write Protect is off<7>[ 5.438652@2] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00<3>[ 5.439822@2] sd 0:0:0:0: [sda] No Caching mode page found<3>[ 5.444113@2] sd 0:0:0:0: [sda] Assuming drive cache: write through<3>[ 5.454824@2] sd 0:0:0:0: [sda] No Caching mode page found<3>[ 5.455815@2] sd 0:0:0:0: [sda] Assuming drive cache: write through<6>[ 5.486902@2] sda: sda1<3>[ 5.490458@2] sd 0:0:0:0: [sda] No Caching mode page found<3>[ 5.490489@2] sd 0:0:0:0: [sda] Assuming drive cache: write through<5>[ 5.496545@2] sd 0:0:0:0: [sda] Attached SCSI removable disk<6>[ 5.502330@3] Freeing unused kernel memory: 380K (c0b84000 - c0be3000)<11>[ 5.532223@0] init: aml-firstboot-init insert aml-firstboot-init<14>[ 5.533110@0] init: command 'loglevel 7' action=early-init status=0 (init.amlogic.board.rc:4)<4>[ 5.544018@0] aml_nftl_dev: module license 'Proprietary' taints kernel.<4>[ 5.547685@0] Disabling lock debugging due to kernel taint<4>[ 5.554044@0] boot_device_flag : 0<4>[ 5.556526@0] register_ntd_blktrans start<4>[ 5.560565@0] ntd device 250!<4>[ 5.563460@0] ntd->name: nfcache<4>[ 5.566692@0] adjust_block_num : 4,reserved_block_ratio 10<4>[ 5.572186@0] nftl version 150330d<4>[ 5.575507@0] nftl build Mar 30 2015_19:39:32<4>[ 5.579890@0] nftl part attr 0<4>[ 5.585151@0] nftl start:146,17, init flag 0<4>[ 5.587292@0] first<4>[ 5.638259@0] average_erase_count:0<4>[ 5.638285@0] second 13,129<4>[ 5.638886@0] part->max_discard_block = 4<4>[ 5.650205@0] current_block1:131<4>[ 5.666340@0] all discard block full!!<4>[ 5.666373@0] free block cnt = 138<4>[ 5.667832@0] new current block is 133<4>[ 5.821928@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!<4>[ 6.192514@2] [RN5T618]battery vol change: 0->0 <4>[ 6.233262@0] recover_current_block_mapping : fill the current block, from page 255<4>[ 6.235277@0] total discard page count is 0<4>[ 6.239437@0] create_part_list:1238,current_used_discard_block=132,current_discard_block_used_count=28<4>[ 6.249172@0] unmappig_pages=31982,discarded_pages=0,mapping_pages=1042<4>[ 6.255328@0] nftl ok!<4>[ 6.258085@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 6.262876@0] aml_nftl_add_ntd ok<4>[ 6.265545@0] ntd device 250!<4>[ 6.268478@0] ntd->name: nfcode<4>[ 6.271645@0] adjust_block_num : 4,reserved_block_ratio 10<4>[ 6.277058@0] nftl version 150330d<4>[ 6.280459@0] nftl build Mar 30 2015_19:39:32<4>[ 6.284804@0] nftl part attr 0<4>[ 6.292607@0] nftl start:322,33, init flag 0<4>[ 6.292929@0] first<4>[ 6.394928@0] average_erase_count:0<4>[ 6.394952@0] second 265,289<4>[ 6.395639@0] part->max_discard_block = 4<4>[ 6.549038@0] current_block1:55<4>[ 6.557715@0] all discard block full!!<4>[ 6.557793@0] free block cnt = 64<4>[ 6.559120@0] new current block is 57<4>[ 6.710394@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!<5>[ 7.109340@0] scsi 1:0:0:0: Direct-Access USB TO I DE/SATA Device 0016 PQ: 0 ANSI: 4<4>[ 7.113668@2] sd 1:0:0:0: [sdb] Test WP failed, assume Write Enabled<3>[ 7.118805@2] sd 1:0:0:0: [sdb] Asking for cache data failed<3>[ 7.123944@2] sd 1:0:0:0: [sdb] Assuming drive cache: write through<4>[ 7.125592@0] recover_current_block_mapping : fill the current block, from page 255<4>[ 7.125594@0] total discard page count is 0<4>[ 7.125597@0] create_part_list:1238,current_used_discard_block=56,current_discard_block_used_count=285<4>[ 7.126507@0] unmappig_pages=9933,discarded_pages=0,mapping_pages=64051<4>[ 7.126509@0] nftl ok!<4>[ 7.127142@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.127682@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.128168@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.128675@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.129155@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 7.129634@0] aml_nftl_add_ntd ok<4>[ 7.129637@0] ntd device 250!<4>[ 7.129638@0] ntd->name: nfdata<4>[ 7.129642@0] adjust_block_num : 4,reserved_block_ratio 10<4>[ 7.129644@0] nftl version 150330d<4>[ 7.129646@0] nftl build Mar 30 2015_19:39:32<4>[ 7.129750@0] nftl part attr 0<4>[ 7.153087@0] nftl start:1556,146, init flag 0<4>[ 7.154351@0] first<4>[ 7.217547@2] sd 1:0:0:0: [sdb] Test WP failed, assume Write Enabled<3>[ 7.222045@2] sd 1:0:0:0: [sdb] Asking for cache data failed<3>[ 7.227159@2] sd 1:0:0:0: [sdb] Assuming drive cache: write through<5>[ 7.233408@2] sd 1:0:0:0: [sdb] Attached SCSI disk<4>[ 7.653388@0] found discard block:1554<4>[ 7.653717@0] average_erase_count:0<4>[ 7.654986@0] second 902,1410<4>[ 7.657917@0] part->max_discard_block = 4<4>[ 8.171760@0] current_block1:653<4>[ 8.202710@0] currnet_discard_block1:1554<4>[ 8.211278@0] reach the last discard page:13<4>[ 8.212701@0] free block cnt = 798<4>[ 8.213291@0] new current block is 692<4>[ 8.396504@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!<4>[ 8.778936@0] recover_current_block_mapping : fill the current block, from page 255<4>[ 8.780971@0] total discard page count is 13<4>[ 8.785214@0] create_part_list:1238,current_used_discard_block=1554,current_discard_block_used_count=2<4>[ 8.799568@0] unmappig_pages=271092,discarded_pages=4009,mapping_pages=85859<4>[ 8.801495@0] nftl ok!<4>[ 8.804524@0] Enable QUEUE_FLAG_DISCARD for NFTL<4>[ 8.808956@0] aml_nftl_add_ntd ok<4>[ 8.811776@0] init_aml_nftl end<14>[ 8.815115@0] init: command 'insmod /boot/aml_nftl_dev.ko' action=early-init status=0 (init.amlogic.board.rc:9)<4>[ 8.830079@0] gpu cooling register okay with err=0<4>[ 8.830232@0] gpu core cooling register okay with err=0<4>[ 8.835053@0] Mali: Mali device driver loaded<14>[ 8.839391@0] init: command 'insmod /boot/mali.ko mali_debug_level=2 mali_shared_mem_size=0x40000000' action=early-init status=0 (init.amlogic.board.rc:10)<14>[ 8.853146@0] init: processing action 0xb646c970 (wait_for_coldboot_done)<14>[ 8.859862@0] init: wait for /dev/.coldboot_done<14>[ 8.864458@0] init: command 'wait_for_coldboot_done' action=wait_for_coldboot_done status=0 ((null):0)<14>[ 8.873743@0] init: processing action 0xb646c9a0 (mix_hwrng_into_linux_rng)<14>[ 8.880785@0] init: Mixed 512 bytes from /dev/hw_random into /dev/urandominit: command 'mix_hwrng_into_linux_rng' action=mix_hwrng_into_linux_rng status=0 ((null):0)<14>[ 8.895401@0] init: processing action 0xb646c9d0 (keychord_init)<14>[ 8.901410@0] init: command 'keychord_init' action=keychord_init status=0 ((null):0)<14>[ 8.909077@0] init: processing action 0xb646ca00 (console_init)<7>[ 8.915044@0] config uart_ao_ttyS0:: Character length 8bits/char<14>[ 8.915106@0] init: command 'console_init' action=console_init status=0 ((null):0)<14>[ 8.917041@0] init: processing action 0xb64460a0 (init)<14>[ 8.922269@0] init: command 'sysclktz 0' action=init status=0 (/init.rc:33)<11>[ 8.932352@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'<11>[ 8.937322@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'<11>[ 8.947261@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'<11>[ 8.955382@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'<11>[ 8.965261@0] init: enter do_confirm_formated /dev/block/data, /data<11>[ 8.971584@0] init: do_confirm_formated ext4 try mount<4>[ 8.976725@0] aml_nftl_open ok!<4>[ 8.980548@0] force enable DISCARD here for ext4 fs<7>[ 10.113757@0] EXT4-fs (data): ext4_orphan_cleanup: deleting unreferenced inode 265113<7>[ 10.113898@0] EXT4-fs (data): ext4_orphan_cleanup: deleting unreferenced inode 40324<6>[ 10.113968@0] EXT4-fs (data): 2 orphan inodes deleted<6>[ 10.113998@0] EXT4-fs (data): recovery complete<4>[ 10.163532@0] checked enable EXT4 DISCARD here<6>[ 10.163567@0] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: noauto_da_alloc<11>[ 10.179600@0] init: enter do_confirm_formated /dev/block/cache, /cache<11>[ 10.180499@0] init: do_confirm_formated ext4 try mount<4>[ 10.185707@0] aml_nftl_open ok!<4>[ 10.189413@0] force enable DISCARD here for ext4 fs<6>[ 10.218056@0] EXT4-fs (cache): recovery complete<4>[ 10.221046@0] checked enable EXT4 DISCARD here<6>[ 10.221461@0] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: noauto_da_alloc<4>[ 10.234210@1] aml_nftl_open ok!<4>[ 10.234931@1] force enable DISCARD here for ext4 fs<4>[ 10.244454@1] checked enable EXT4 DISCARD here<6>[ 10.244485@1] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)<14>[ 10.251289@1] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0<4>[ 10.258798@1] blktrans_ioctl -cmd: 125d,801c0204,64<4>[ 10.263802@1] aml_nftl_open ok!<4>[ 10.267525@1] force enable DISCARD here for ext4 fs<4>[ 10.271708@1] EXT4-fs (data): Ignoring removed nomblk_io_submit option<4>[ 10.285831@1] checked enable EXT4 DISCARD here<6>[ 10.285861@1] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro<14>[ 10.294912@1] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0<14>[ 10.304606@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/data<4>[ 10.377832@0] aml_nftl_open ok!<4>[ 10.377915@0] aml_nftl_open ok!<14>[ 10.391673@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)<14>[ 10.391733@1] e2fsck: /dev/block/data: clean, 10770/361440 files, 339607/1443840 blocks<4>[ 10.398886@1] aml_nftl_open ok!<4>[ 10.402562@1] force enable DISCARD here for ext4 fs<4>[ 10.406698@1] EXT4-fs (data): Ignoring removed nomblk_io_submit option<4>[ 10.415693@1] checked enable EXT4 DISCARD here<6>[ 10.417614@1] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic<14>[ 10.427448@1] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0<4>[ 10.434681@1] aml_nftl_open ok!<4>[ 10.438403@1] force enable DISCARD here for ext4 fs<4>[ 10.442599@1] EXT4-fs (cache): Ignoring removed nomblk_io_submit option<4>[ 10.452197@1] checked enable EXT4 DISCARD here<6>[ 10.453585@1] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro<14>[ 10.463931@1] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0<14>[ 10.472582@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache<4>[ 10.481409@3] aml_nftl_open ok!<4>[ 10.481483@3] aml_nftl_open ok!<14>[ 10.491021@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)<14>[ 10.491067@1] e2fsck: /dev/block/cache: clean, 16/32768 files, 4211/131072 blocks<4>[ 10.497689@1] aml_nftl_open ok!<4>[ 10.501369@1] force enable DISCARD here for ext4 fs<4>[ 10.505524@1] EXT4-fs (cache): Ignoring removed nomblk_io_submit option<4>[ 10.514519@1] checked enable EXT4 DISCARD here<6>[ 10.516528@1] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic<14>[ 10.526450@1] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0<7>[ 10.582424@2] config uart_ao_ttyS0:: Character length 8bits/char<6>[ 10.584452@1] binder: 142:142 transaction failed 29189, size 0-0<4>[ 10.630841@0] buf[0]=27,buf[1]=9b,err=4<4>[ 10.630876@0] M8:adc=434,TS_C=7,flag=1<4>[ 10.632803@0] efuse_flag=a<4>[ 10.635468@0] amlogic_thermal_probe, this chip is trimmed, use thermal<6>[ 10.642029@0] amlogic-thermal aml_thermal: amlogic thermal probe start<4>[ 10.648506@0] #thermal-cells=7<4>[ 10.651566@0] keep_mode is disabled<4>[ 10.654966@0] pdata->temp_trip_count=4<4>[ 10.658703@0] temperature=70 on trip point=0<4>[ 10.662998@0] fixing high_freq=1608001 to 1608000 at trip point 0,level=2<4>[ 10.669749@0] fixing low_freq=1608001 to 1608000 at trip point 0,level=2<4>[ 10.676382@0] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511<4>[ 10.682863@0] cpu[0] core num==3<4>[ 10.686007@0] gpu[0] core num==5<4>[ 10.689209@0] temperature=80 on trip point=1<4>[ 10.693506@0] fixing high_freq=1200001 to 1200000 at trip point 1,level=6<4>[ 10.700271@0] fixing low_freq=1200001 to 1200000 at trip point 1,level=6<4>[ 10.706898@0] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435<4>[ 10.713354@0] cpu[1] core num==2<4>[ 10.716544@0] gpu[1] core num==4<4>[ 10.719770@0] temperature=90 on trip point=2<4>[ 10.723971@0] fixing high_freq=800001 to 696000 at trip point 2,level=11<4>[ 10.730726@0] fixing low_freq=800001 to 696000 at trip point 2,level=11<4>[ 10.737233@0] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328<4>[ 10.743697@0] cpu[2] core num==2<4>[ 10.746855@0] gpu[2] core num==3<4>[ 10.750125@0] temperature=260 on trip point=3<4>[ 10.754403@0] fixing high_freq=-1 to -22 at trip point 3,level=-1<4>[ 10.760510@0] fixing low_freq=-1 to -22 at trip point 3,level=-1<4>[ 10.766474@0] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1<4>[ 10.772747@0] cpu[3] core num==-1<4>[ 10.775979@0] gpu[3] core num==-1<4>[ 10.779270@0] idle interval=1000<4>[ 10.782546@0] pdata->name:aml_thermal, pdata:ec4c8600<4>[ 10.787513@0] amlogic_thermal_init_from_dts, 998<4>[ 10.792147@0] amlogic_thermal_initialize, 1014, pdata:ec4c8600<4>[ 10.798673@0] tmp_trip[0].cpu_core_upper=1<4>[ 10.802048@0] tmp_trip[1].cpu_core_upper=2<4>[ 10.806078@0] tmp_trip[2].cpu_core_upper=2<4>[ 10.810207@0] tmp_trip[3].cpu_core_upper=-1<38>[ 10.810852@2] logd.auditd: start<6>[ 10.817553@0] aml_thermal bind thermal-cpucore-0 okay !<6>[ 10.822800@0] aml_thermal bind thermal-cpufreq-0 okay !<4>[ 10.827911@0] tmp_trip[0].gpu_core_upper=1<4>[ 10.832069@0] tmp_trip[1].gpu_core_upper=2<4>[ 10.836065@0] tmp_trip[2].gpu_core_upper=3<4>[ 10.840246@0] tmp_trip[3].gpu_core_upper=-1<6>[ 10.844304@0] aml_thermal bind thermal-gpucore-0 okay !<4>[ 10.849550@0] pdata->tmp_trip[0].gpu_lower_level=1<4>[ 10.854260@0] pdata->tmp_trip[0].gpu_upper_level=1<4>[ 10.859040@0] pdata->tmp_trip[1].gpu_lower_level=2<4>[ 10.863842@0] pdata->tmp_trip[1].gpu_upper_level=2<4>[ 10.868624@0] pdata->tmp_trip[2].gpu_lower_level=3<4>[ 10.875883@0] pdata->tmp_trip[2].gpu_upper_level=3<4>[ 10.878131@0] pdata->tmp_trip[3].gpu_lower_level=-1<4>[ 10.883039@0] pdata->tmp_trip[3].gpu_upper_level=-1<6>[ 10.887822@0] aml_thermal bind thermal-gpufreq-0 okay !<6>[ 10.893206@0] amlogic: Kernel Thermal management registered<6>[ 10.898578@0] amlogic-thermal aml_thermal: amlogic thermal probe done<4>[ 10.906576@0] video first pts = 0<4>[ 10.908634@0] IEC958 16bit<4>[ 10.911005@0] hdmitx: audio: aout notify rate 48000<4>[ 10.915842@0] hdmitx: audio: aout notify size 16<4>[ 10.920442@0] hdmitx: audio: no update<4>[ 10.924136@0] aml_i2s_close device type 4 <7>[ 10.928269@0] enter aml_set_bias_level level: 1<7>[ 10.928275@0] enter aml_set_bias_level level: 2<4>[ 10.928655@0] IEC958 16bit<4>[ 10.931031@0] hdmitx: audio: aout notify rate 48000<4>[ 10.935795@0] hdmitx: audio: aout notify size 16<4>[ 10.940399@0] hdmitx: audio: no update<4>[ 10.944059@0] aml_i2s_close device type 8 <4>[ 10.948808@0] aml_i2s_close device type 1 <6>[ 10.951115@2] read descriptors<6>[ 10.951120@2] read strings<7>[ 10.958188@0] enter aml_set_bias_level level: 1<7>[ 10.958195@0] enter aml_set_bias_level level: 2<4>[ 10.958333@0] IEC958 16bit<4>[ 10.960986@0] hdmitx: audio: aout notify rate 48000<4>[ 10.967164@0] hdmitx: audio: aout notify size 16<4>[ 10.970119@0] hdmitx: audio: no update<4>[ 10.975572@0] aml_i2s_close device type 2 <4>[ 10.980900@0] vfm_map_store:rm default<4>[ 10.982802@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo<11>[ 10.989710@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'<11>[ 10.999283@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'<11>[ 11.011766@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'<11>[ 11.021613@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'<11>[ 11.036021@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'<11>[ 11.043994@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'<11>[ 11.056476@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'<11>[ 11.066337@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'<11>[ 11.080054@0] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'<11>[ 11.086596@0] init: cannot find '/system/bin/rild', disabling 'ril-daemon'<11>[ 11.094654@0] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'<3>[ 11.107058@0] android_usb: already disabled<6>[ 11.107318@0] mtp_bind_config<4>[ 11.108952@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode<4>[ 11.108952@0] <4>[ 11.120499@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode<4>[ 11.120499@0] <4>[ 11.131581@0] WARN::ep_dequeue:413: bogus device state<4>[ 11.131581@0] <6>[ 11.138422@0] mtp_bind_config<4>[ 11.141293@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode<4>[ 11.141293@0] <6>[ 11.146519@1] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS<11>[ 11.152906@1] dig: data_integrity_guard main!<6>[ 11.160713@3] warning: `su' uses 32-bit capabilities (legacy support in use)<4>[ 11.186301@0] blktrans_ioctl -cmd: 125d,801c0204,64<6>[ 11.206123@0] EXT4-fs (system): re-mounted. Opts: (null)<6>[ 11.268090@3] EXT4-fs (system): re-mounted. Opts: (null)<6>[ 11.291552@1] EXT4-fs (system): re-mounted. Opts: (null)<11>[ 11.314940@3] init: untracked pid 217 exited with status 0<4>[ 11.391674@0] tvmode set to 720p<4>[ 11.391711@0] set_vout_mode[256]fps_target_mode=11<4>[ 11.394045@0] mode is 11,sync_duration_den=1,sync_duration_num=60<4>[ 11.400326@0] TV mode 720p selected.<4>[ 11.403863@0] tvoutc_setmode[512]<4>[ 11.406984@0] tvoutc_setmode[523] mode is 11<4>[ 11.411309@0] vinfo mode is: 720p<4>[ 11.414544@0] new mode =720p set ok<4>[ 11.417992@0] hdmitx: video: get current mode: 720p<4>[ 11.422966@0] is_similar_hdmi_vic[326] vic_old=16,mode_new=11<4>[ 11.428772@0] hdmitx: video: get current mode: 720p<4>[ 11.428780@0] is_similar_hdmi_vic[326] vic_old=16,mode_new=11<4>[ 11.428784@0] hdmitx: system: gate/pwr cmd: 7<4>[ 11.428831@0] hdmitx: system: already init VIC = 0 Now VIC = 4<4>[ 11.428835@0] hdmitx: system: 4 (cd0,cs0,pm1,vd0,1) <4>[ 11.428836@0] hdmitx: system: gate/pwr cmd: 0<4>[ 11.428840@0] hdmitx: system: hw reset<4>[ 11.429894@0] hdmitx: audio: SPDIF<4>[ 11.429951@0] hdmitx: system: reconfig packet setting done<4>[ 11.449956@0] hdmitx: system: set pll<4>[ 11.449959@0] hdmitx: system: param->VIC:4<4>[ 11.449964@0] mode is: 11<4>[ 11.449967@0] VPU_VIU_VENC_MUX_CTRL: 0x22a<4>[ 11.449968@0] viu chan = 1<4>[ 11.449969@0] VPU_VIU_VENC_MUX_CTRL: 0x22a<4>[ 11.449970@0] config HPLL<4>[ 11.449971@0] set_hpll_clk_out[81] clk = 2970<4>[ 11.455547@3] cur_mode = 0<4>[ 11.455550@3] [0x0] = 0x1dd0190<4>[ 11.455552@3] [0x4] = 0xf800ca<4>[ 11.455553@3] [0x8] = 0x82006e<4>[ 11.455554@3] [0xc] = 0x3c0030<4>[ 11.455555@3] [0x10] = 0x30fa0013<4>[ 11.455557@3] [0x18] = 0x6f19000<4>[ 11.455558@3] [0x1c] = 0x9f40<4>[ 11.455559@3] [0x20] = 0x0<4>[ 11.455561@3] [0x24] = 0x0<4>[ 11.455562@3] [0x28] = 0x0<4>[ 11.455564@3] set_remote_mode[69]<4>[ 11.472560@2] config HPLL done<4>[ 11.472572@2] enc_vpu_bridge_reset[292]<4>[ 11.609495@3] hdmitx: system: phy setting done<4>[ 11.609532@3] Sink is HDMI device<4>[ 11.611600@3] No sink attached<4>[ 11.614667@3] hdmitx: audio: audio channel num is 1<4>[ 11.621625@3] hdmitx: audio: SPDIF<4>[ 11.627632@3] hdmitx: audio: current VIC: 4<4>[ 11.627668@3] hdmitx: audio: audio sample rate: 3<4>[ 11.631736@3] hdmitx: audio: set audio N para<4>[ 11.636054@3] hdmitx: audio: PCM out to HDMI<4>[ 11.640320@3] hdmitx: audio: i2s_to_spdif_flag:1 <4>[ 11.644976@3] hdmitx: audio: Enable audio spdif to HDMI<4>[ 11.650195@3] hdmitx: audio: Audio Type: PCM<4>[ 11.659526@3] set_vout_mode[264]<4>[ 11.723706@3] buf=0<4>[ 11.723731@3] IEC958_mode_raw=0<4>[ 11.723861@3] osd0=>x:0 ,y:0,w:1920,h:1080<4>[ 11.723861@3] osd1=> x:0,y:0,w:18,h:18<4>[ 11.740389@3] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE<4>[ 11.740762@3] osd[1].scaledata: 1920 1280 1080 720<4>[ 11.745526@3] osd[1].pandata: 0 0 0 0<4>[ 13.218436@2] force enable DISCARD here for ext4 fs<4>[ 13.218902@2] checked enable EXT4 DISCARD here<4>[ 13.222829@2] EXT4-fs (zram0): mounting with "discard" option, but the device does not support discard<6>[ 13.222833@2] EXT4-fs (zram0): mounted filesystem with ordered data mode. Opts: (null)<7>[ 14.859515@0] -----hotplug:2<4>[ 14.920714@2] IRQ94 no longer affine to CPU2<5>[ 14.920921@1] CPU2: shutdown<4>[ 15.059914@3] IRQ95 no longer affine to CPU3<5>[ 15.060184@1] CPU3: shutdown<7>[ 15.949577@0] enter aml_set_bias_level level: 1<7>[ 15.949590@0] enter aml_set_bias_level level: 2<7>[ 15.979551@0] enter aml_set_bias_level level: 1<7>[ 15.979559@0] enter aml_set_bias_level level: 2<4>[ 17.577100@1] vout [tv_set_vframe_rate_end_hint] return mode = 11, policy = 1!<4>[ 17.579311@1] vout [framerate_automation_set_mode] mode_target = 11<4>[ 17.584972@1] +++++++++++++++++framerate_automation_set_mode[1128]auto_mode=0++++++++++++++++<6>[ 17.922607@0] request_suspend_state: wakeup (3->0) at 17803145000 (1970-01-01 00:00:13.504749000 UTC)<4>[ 17.922610@0] request_suspend_state,169,old_sleep=0,new_state=0<4>[ 37.259652@1] write pen_release: 2<4>[ 37.259880@2] CPU2: Booted secondary processor<4>[ 37.559672@1] write pen_release: 3<4>[ 37.559926@3] CPU3: Booted secondary processor<7>[ 38.259754@0] -----hotplug:2<4>[ 38.309839@2] IRQ94 no longer affine to CPU2<5>[ 38.310063@1] CPU2: shutdown<4>[ 38.479965@3] IRQ95 no longer affine to CPU3<5>[ 38.480180@1] CPU3: shutdown<6>[ 38.670110@0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:<6>[ 38.671799@0] lowmemorykiller: oom_adj 0 => oom_score_adj 0<6>[ 38.677363@0] lowmemorykiller: oom_adj 1 => oom_score_adj 58<6>[ 38.683015@0] lowmemorykiller: oom_adj 2 => oom_score_adj 117<6>[ 38.688726@0] lowmemorykiller: oom_adj 3 => oom_score_adj 176<6>[ 38.694488@0] lowmemorykiller: oom_adj 9 => oom_score_adj 529<6>[ 38.700224@0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000<6>[ 39.837800@1] acc_open<6>[ 39.837810@1] acc_release<6>[ 40.105386@0] netdev_open<6>[ 40.105388@0] Ethernet reset<4>[ 40.105393@0] NET MDA descpter start addr=ebdd1000<4>[ 40.105907@0] phy_interface = 1<4>[ 40.105910@0] aml_phy_init: trying to attach to 0:00<4>[ 40.106249@0] --1--write mac add to:ed995ec8: 00 11 6d 09 09 67 |.m..g|<4>[ 40.106258@0] unkown current key-name,key_read_show:1396<4>[ 40.106261@0] version NO error<4>[ 40.106263@0] ret = -22<4>[ 40.106263@0] print_buff=<4>[ 40.106268@0] --2--write mac add to:ed995ec8: 00 11 6d 09 09 67 |.m..g|<4>[ 40.106274@0] write mac add to:ed995ec8: 00 11 6d 09 09 67 |.m..g|<4>[ 40.106281@0] Current DMA mode=0, set mode=621c100<7>[ 40.106307@0] eth0: opened (irq 40).<4>[ 40.106310@0] ether leave promiscuous mode<4>[ 40.106312@0] ether leave all muticast mode<4>[ 40.106313@0] changed the Multicast,mcount=1<4>[ 40.106317@0] add mac address:33:33:00:00:00:01,bit=1<4>[ 40.106318@0] set hash low=2,high=0<4>[ 40.106320@0] changed the filter setting to :4<4>[ 40.106328@0] changed the Multicast,mcount=1<4>[ 40.106330@0] add mac address:33:33:00:00:00:01,bit=1<4>[ 40.106387@0] changed the Multicast,mcount=2<4>[ 40.106390@0] add mac address:33:33:00:00:00:01,bit=1<4>[ 40.106392@0] add mac address:01:00:5e:00:00:01,bit=32<4>[ 40.106393@0] set hash low=2,high=1<4>[ 40.106395@0] changed the filter setting to :4<6>[ 40.106407@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready<4>[ 40.759977@1] write pen_release: 2<4>[ 40.760124@2] CPU2: Booted secondary processor<4>[ 40.840261@2] dhd_module_init in<4>[ 40.840263@2] wifi_setup_dt<4>[ 40.840265@2] wifi_request_32k_clk : ON-->ON for sdio_wifi<4>[ 40.840268@2] interrupt_pin(133) : (null)<4>[ 40.852416@2] reg:2620,clearmask=100010,setmask=0<4>[ 40.854875@2] reg:2622,clearmask=ff,set pin=133<4>[ 40.859381@2] reg:2623,clearmask=70000,setmask=4<4>[ 40.864804@2] interrupt_pin(133) : sdio_wifi<4>[ 40.864807@2] power_on_pin(6) : (null)<4>[ 40.864825@2] power_on_pin(6) : sdio_wifi<4>[ 40.864827@2] power_on_pin2(123) : (null)<4>[ 40.864834@2] power_on_pin2(123) : sdio_wifi<4>[ 40.865129@2] ======== bcm_wlan_set_plat_data ========<4>[ 40.865137@2] host_oob_irq: 100
<4>[ 40.865139@2] host_oob_irq_flags=4<4>[ 40.865142@2] dhd_wifi_platform_load: Enter<4>[ 40.865148@2] Power-up adapter 'DHD generic adapter'<4>[ 40.866061@2] wifi_platform_set_power = 1<4>[ 40.866064@2] ======== PULL WL_REG_ON HIGH! ========<4>[ 40.866069@2] WIFI Disable! 6<4>[ 41.059620@1] write pen_release: 3<4>[ 41.059878@3] CPU3: Booted secondary processor<4>[ 41.131902@0] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.<4>[ 41.133669@2] WIFI Enable! 6<4>[ 41.174253@0] avc open<4>[ 41.179114@0] amvenc_avc check CMA pool sucess, max instance: 1.<4>[ 41.181730@0] amvenc_avc_open: allocating phys 2dc00000, size 18432k, wq:ea84b000.<4>[ 41.181735@0] amvenc_avc memory config sucess, buff start:0x2dc00000, size is 0x1200000, wq:ea84b000.<4>[ 41.181850@0] avc release, wq:ea84b000<4>[ 41.181854@0] remove encode_work_queue ea84b000 sucess, destroy_encode_work_queue line 2408.<4>[ 41.192300@0] ionvideo open<4>[ 41.192308@0] ionvideo_stop_generating!!!!<4>[ 41.192335@0] ionvideo release<4>[ 41.194042@0] ionvideo open<4>[ 41.194049@0] ionvideo_stop_generating!!!!<4>[ 41.194058@0] ionvideo release<4>[ 41.200731@0] ionvideo open<4>[ 41.200742@0] ionvideo_stop_generating!!!!<4>[ 41.200750@0] ionvideo release<4>[ 41.204623@0] ionvideo open<4>[ 41.204635@0] ionvideo_stop_generating!!!!<4>[ 41.204648@0] ionvideo release<4>[ 41.207755@0] ionvideo open<4>[ 41.207765@0] ionvideo_stop_generating!!!!<4>[ 41.207774@0] ionvideo release<4>[ 41.216978@0] ionvideo open<4>[ 41.216988@0] ionvideo_stop_generating!!!!<4>[ 41.216997@0] ionvideo release<4>[ 41.224111@0] ionvideo open<4>[ 41.224121@0] ionvideo_stop_generating!!!!<4>[ 41.224132@0] ionvideo release<4>[ 41.227278@0] ionvideo open<4>[ 41.227290@0] ionvideo_stop_generating!!!!<4>[ 41.227302@0] ionvideo release<4>[ 41.681671@0] Digital output mode: 0 - PCM<4>[ 41.683333@0] Digital output mode: 0 - PCM<4>[ 41.709377@0] Digital output mode: 0 - PCM<4>[ 42.439508@2] [aml_sdio_timeout][0;40;33m time_start_cnt:997<4>[ 42.439508@2] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x1f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940<4>[ 42.439508@2] [0m[aml_sdio_timeout][0;40;33m time_start_cnt:999<4>[ 42.439508@2] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940<4>[ 42.439508@2] [0m<4>[ 44.439507@2] [aml_sdio_timeout][0;40;33m time_start_cnt:996<4>[ 44.439507@2] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940<4>[ 44.439522@2] [0m<4>[ 44.447936@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes)<4>[ 44.449271@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 44.450612@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 44.453014@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes)<6>[ 44.495647@2] sdio: new high speed SDIO card at address 0001, clock 35416666, 4-bit-bus-width<4>[ 44.498016@2] [sdio_reinit] finish<4>[ 44.699515@2] wifi_platform_bus_enumerate device present 1<4>[ 44.699519@2] ======== Card detection to detect SDIO card! ========<4>[ 44.715664@2] bcmsdh_register: register client driver<4>[ 44.716557@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter<4>[ 44.716639@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter<4>[ 44.716643@2] bus num (host idx)=1, slot num (rca)=1<4>[ 44.716645@2] found adapter info 'DHD generic adapter'<4>[ 44.719180@2] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0<4>[ 44.719731@2] DHD: dongle ram size is set to 294912(orig 294912) at 0x0<4>[ 44.719998@2] dhdsdio_probe: Disable prop_txstatus<4>[ 44.722777@2] wl_create_event_handler(): thread:wl_event_handler:475 started<4>[ 44.722782@0] tsk Enter, tsk = 0xf38b344c<4>[ 44.723682@2] dhd_attach(): thread:dhd_watchdog_thread:476 started<4>[ 44.723720@2] dhd_attach(): thread:dhd_dpc:477 started<4>[ 44.723758@2] dhd_attach(): thread:dhd_rxf:478 started<4>[ 44.723765@2] dhd_deferred_work_init: work queue initialized <4>[ 44.723923@2] Dongle Host Driver, version 1.141.66.1 (r483454)<4>[ 44.723923@2] Compiled in drivers/net/wireless/bcmdhd on Feb 3 2016 at 12:12:00<4>[ 44.726205@2] Register interface [wlan0] MAC: 00:90:4c:11:22:33<4>[ 44.726205@2] <4>[ 44.726209@2] dhd_prot_ioctl : bus is down. we have nothing to do<4>[ 44.726268@2] bcmsdh_oob_intr_unregister: Enter<4>[ 44.726269@2] bcmsdh_oob_intr_unregister: irq is not registered<4>[ 44.726276@2] dhd_bus_devreset: WLAN OFF DONE<4>[ 44.726321@2] wifi_platform_set_power = 0<4>[ 44.726323@2] ======== PULL WL_REG_ON LOW! ========<4>[ 44.726801@2] dhd_module_init: Exit err=0<4>[ 45.052256@2] dhd_open: Enter ebde8800<4>[ 45.052264@2] <4>[ 45.052264@2] Dongle Host Driver, version 1.141.66.1 (r483454)<4>[ 45.052264@2] Compiled in drivers/net/wireless/bcmdhd on Feb 3 2016 at 12:12:00<4>[ 45.052267@2] wl_android_wifi_on in 1<4>[ 45.052269@2] wl_android_wifi_on in 2: g_wifi_on=0<4>[ 45.052272@2] wifi_platform_set_power = 1<4>[ 45.052273@2] ======== PULL WL_REG_ON HIGH! ========<4>[ 45.052282@2] WIFI Disable! 6<4>[ 45.271333@2] WIFI Enable! 6<4>[ 45.491564@1] sdio_reset_comm():<4>[ 45.507969@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes)<4>[ 45.512098@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 45.513955@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 45.517202@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes)<4>[ 45.579771@2] [sdio_reinit] finish<4>[ 45.790064@2] <4>[ 45.790064@2] <4>[ 45.790064@2] dhd_bus_devreset: == WLAN ON ==<4>[ 45.796506@2] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0<4>[ 45.796951@2] DHD: dongle ram size is set to 294912(orig 294912) at 0x0<4>[ 45.800583@2] dhd_conf_read_config: fw_count=4<4>[ 45.800586@2] dhd_conf_read_config: name=fw_bcm4339a0e_ag.bin, mac_count=5<4>[ 45.800591@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.800594@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.800597@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.800600@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.800602@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.800604@2] dhd_conf_read_config: name=fw_bcm4339a0e_ag_p2p.bin, mac_count=5<4>[ 45.800609@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.800612@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.800614@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.800617@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.800620@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.800622@2] dhd_conf_read_config: name=fw_bcm4339a0e_ag_apsta.bin, mac_count=5<4>[ 45.800625@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.800628@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.800630@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.800633@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.800636@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.800638@2] dhd_conf_read_config: name=fw_bcm4339a0e_ag_mfg.bin, mac_count=5<4>[ 45.800640@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.800643@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.800645@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.800648@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.800650@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.800688@2] dhd_conf_read_config: nv_count=1<4>[ 45.800690@2] dhd_conf_read_config: name=nvram_ap6335e.txt, mac_count=5<4>[ 45.800693@2] dhd_conf_read_config: oui=0x0022F4, nic_start=0xE85408, nic_end=0xE8549D<4>[ 45.800695@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x3557A9, nic_end=0x35582A<4>[ 45.800698@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x406927, nic_end=0x406A20<4>[ 45.800701@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x6E25BB, nic_end=0x6E269A<4>[ 45.800704@2] dhd_conf_read_config: oui=0x983B16, nic_start=0x916157, nic_end=0x916487<4>[ 45.801680@2] dhd_conf_read_config: bcn_timeout = 20<4>[ 45.801791@2] dhd_conf_read_config: kso_enable = 0<4>[ 45.801840@2] dhd_conf_set_fw_name_by_chip: firmware_path=/etc/wifi/40183/fw_bcm40183b2.bin<4>[ 45.801843@2] dhd_conf_set_nv_name_by_chip: yxg ----nv_path=/etc/wifi/40183/ap6330_nvram.txt<4>[ 45.801851@2] sdioh_cis_read: func_cis_ptr[0]=0x1070<11>[ 45.821019@2] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 45.821029@2] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 45.821036@2] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 45.821041@2] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 45.821047@2] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 45.821052@2] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 45.821057@2] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 45.821062@2] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 45.821067@2] systemcontrol: [ubootenv] open devices error: No such file or directory<11>[ 45.821072@2] systemcontrol: [ubootenv] Cannot read : -1.<11>[ 45.821076@2] systemcontrol: [ubootenv] read failed <11>[ 45.821084@2] systemcontrol: [ubootenv] ubootenv.var.firstboot is not a ubootenv varible.<11>[ 46.167958@1] dig: data_integrity_guard isBootCompleted:1!<4>[ 46.173136@2] dhd_conf_set_fw_name_by_mac: fw_typ=0 != fw_type_new=2<4>[ 46.173140@2] dhd_conf_set_fw_name_by_mac: fw_typ=0 != fw_type_new=1<4>[ 46.173142@2] dhd_conf_set_fw_name_by_mac: fw_typ=0 != fw_type_new=3<4>[ 46.173150@2] sdioh_cis_read: func_cis_ptr[0]=0x1070<11>[ 46.177258@1] dig: dig set_data_ro_count count:0!<4>[ 46.211240@2] Final fw_path=/etc/wifi/40183/fw_bcm40183b2.bin<4>[ 46.211367@2] Final nv_path=/etc/wifi/40183/ap6330_nvram.txt<4>[ 46.211370@2] Final conf_path=/system/etc/wifi/config.txt<4>[ 46.273747@2] sdioh_request_buffer: [1] doing memory copy buf=ebae0000, len=1939<4>[ 46.276272@2] NVRAM version: AP6330_NVRAM_V1.0_20121130
<4>[ 46.281050@2] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.<4>[ 46.548048@2] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)<4>[ 46.548155@2] bcmsdh_oob_intr_register: Enter<4>[ 46.548159@2] bcmsdh_oob_intr_register OOB irq=100 flags=4<4>[ 46.548190@2] bcmsdh_oob_intr_register: enable_irq_wake<4>[ 46.549401@0] dhd_conf_set_band: Set band 0<4>[ 46.551648@0] Firmware up: op_mode=0x0005, MAC=6c:fa:a7:5a:78:44<4>[ 46.551653@0] dhd_conf_set_country: Set country US, revision 0<4>[ 46.625288@0] Country code: US (US/0)<4>[ 46.625666@0] dhd_conf_set_roam: Set roam_off 1<4>[ 46.630802@0] dhd_preinit_ioctls Set ampdu_ba_wsize to 32 failed -2<4>[ 46.631279@0] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23<4>[ 46.631717@0] dhd_preinit_ioctls buf_key_b4_m4 set failed -23<4>[ 46.640459@0] Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5<4>[ 46.640465@0] Driver: 1.141.66.1 (r483454)<4>[ 46.640465@0] Firmware: wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 <4>[ 46.646513@0] dhd_preinit_ioctls wl ampdu_hostreorder failed -23<4>[ 46.647090@0] wl_android_wifi_on: Success<4>[ 46.728231@0] dhd_open: Exit ret=0<4>[ 47.126702@0] dhd_set_suspend: Remove extra suspend setting<7>[ 51.359539@1] -----hotplug:2<4>[ 51.410073@1] IRQ93 no longer affine to CPU1<5>[ 51.410341@0] CPU1: shutdown<4>[ 51.539905@2] IRQ94 no longer affine to CPU2<5>[ 51.540141@0] CPU2: shutdown<4>[ 51.819503@0] function[set_tm1628_led_value] line 228 display string: 00:00 .<6>[ 51.835952@0] BT_RADIO going: off<6>[ 51.835984@0] BCM_BT: going OFF<6>[ 51.859710@0] BT_RADIO going: on<6>[ 51.859742@0] BCM_BT: going ON<7>[ 51.919782@3] config uart_a_ttyS1:: Character length 8bits/char<6>[ 51.939517@3] Changing uart_a_ttyS1: baud from 0 to 115200<7>[ 51.959529@3] config uart_a_ttyS1:: Character length 8bits/char<7>[ 51.964053@3] config uart_a_ttyS1:: Character length 8bits/char<6>[ 51.979522@3] Changing uart_a_ttyS1: baud from 115200 to 2000000<4>[ 52.160080@0] write pen_release: 1<4>[ 52.160285@1] CPU1: Booted secondary processor<7>[ 52.503499@1] config uart_a_ttyS1:: Character length 8bits/char<6>[ 52.519522@1] Changing uart_a_ttyS1: baud from 2000000 to 115200<7>[ 52.741705@1] config uart_a_ttyS1:: Character length 8bits/char<6>[ 52.759531@1] Changing uart_a_ttyS1: baud from 115200 to 2000000<3>[ 53.717183@3] EXT4-fs (sdb): unable to read superblock<4>[ 54.259947@0] write pen_release: 2<4>[ 54.260247@2] CPU2: Booted secondary processor<7>[ 58.259522@3] -----hotplug:2<4>[ 58.319847@2] IRQ94 no longer affine to CPU2<5>[ 58.320097@0] CPU2: shutdown<4>[ 58.459929@1] IRQ93 no longer affine to CPU1<5>[ 58.460191@0] CPU1: shutdown<4>[ 59.342332@3] Connectting with ca:60:00:95:2b:c8 channel (36) ssid "tomato_5G", len (9)<4>[ 59.342332@3] <4>[ 59.831079@0] wl_bss_connect_done succeeded with ca:60:00:95:2b:c8<4>[ 59.880087@0] wl_bss_connect_done succeeded with ca:60:00:95:2b:c8<4>[ 60.459713@0] write pen_release: 1<4>[ 60.459906@1] CPU1: Booted secondary processor<4>[ 60.801345@0] dhd_set_suspend: Remove extra suspend setting<4>[ 60.808468@0] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 60.809987@0] ANDROID-ERROR) failed to getting batching results<4>[ 60.816243@0] dhd_pno_stop_for_batch : wifi location service is not supported<4>[ 60.823656@0] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL<4>[ 60.830547@0] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL<3>[ 60.838136@0] ANDROID-ERROR) failed to stop batching scan<6>[ 61.191102@0] binder: 1108:2119 transaction failed 29189, size 168-0<4>[ 61.629492@0] function[set_tm1628_led_value] line 228 display string: 18:28 .<11>[ 61.724551@3] init: untracked pid 2227 exited with status 0<4>[ 61.759614@0] write pen_release: 2<4>[ 61.759852@2] CPU2: Booted secondary processor<4>[ 62.639474@0] function[set_tm1628_led_value] line 228 display string: 18:29 .<11>[ 62.920779@3] init: untracked pid 2305 exited with status 0<7>[ 64.759497@1] -----hotplug:2<4>[ 64.809828@1] IRQ93 no longer affine to CPU1<5>[ 64.810083@0] CPU1: shutdown<4>[ 64.919844@2] IRQ94 no longer affine to CPU2<5>[ 64.920097@0] CPU2: shutdown<4>[ 65.659711@0] write pen_release: 1<4>[ 65.659890@1] CPU1: Booted secondary processor<6>[ 67.633957@1] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.<7>[ 68.059511@0] -----hotplug:2<4>[ 68.109951@1] IRQ93 no longer affine to CPU1<5>[ 68.110268@0] CPU1: shutdown<11>[ 70.825217@0] init: untracked pid 2230 exited with status 0<11>[ 70.825330@0] init: untracked pid 2309 exited with status 0<4>[ 70.859698@0] write pen_release: 1<4>[ 70.859886@1] CPU1: Booted secondary processor<11>[ 71.883077@0] init: untracked pid 2449 exited with status 49<11>[ 72.114933@0] init: untracked pid 2453 exited with status 0<7>[ 73.459741@3] -----hotplug:2<4>[ 73.511460@1] IRQ93 no longer affine to CPU1<5>[ 73.511742@0] CPU1: shutdown<4>[ 77.359595@0] write pen_release: 1<4>[ 77.359776@1] CPU1: Booted secondary processor<7>[ 78.259660@1] -----hotplug:2<4>[ 78.321936@1] IRQ93 no longer affine to CPU1<5>[ 78.322192@0] CPU1: shutdown<7>[ 80.838864@3] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 80.839002@3] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 80.839006@3] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 80.839008@3] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 80.839010@3] iec958 mode PCM16<4>[ 80.839015@3] IEC958 16bit<4>[ 80.839018@3] hdmitx: audio: aout notify rate 48000<4>[ 80.839020@3] hdmitx: audio: aout notify size 16<4>[ 80.839021@3] hdmitx: audio: no update<6>[ 80.839023@3] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 80.839240@3] enter aml_set_bias_level level: 2<7>[ 80.839244@3] enter aml_set_bias_level level: 2<7>[ 80.839248@0] enter aml_set_bias_level level: 1<7>[ 80.839250@0] enter aml_set_bias_level level: 2<4>[ 80.839492@3] speaker_events--mute =1<7>[ 80.859585@0] enter aml_set_bias_level level: 3<7>[ 80.859591@0] enter aml_set_bias_level level: 3<6>[ 80.859989@3] [aml-i2s-dai]aiu i2s playback enable<6>[ 80.859989@3] <6>[ 80.859990@3] [aml-i2s-dai]audio_hw_958_enable 1<6>[ 83.865635@0] [aml-i2s-dai]aiu i2s playback disable<6>[ 83.865635@0] <6>[ 83.866573@0] [aml-i2s-dai]audio_hw_958_enable 0<4>[ 83.871533@0] IEC958 16bit<4>[ 83.874064@0] hdmitx: audio: aout notify rate 48000<4>[ 83.878850@0] hdmitx: audio: aout notify size 16<4>[ 83.883631@0] hdmitx: audio: no update<4>[ 83.887172@0] aml_i2s_close device type 8 <4>[ 84.221583@3] IRQ95 no longer affine to CPU3<5>[ 84.221828@0] CPU3: shutdown<7>[ 88.900314@0] enter aml_set_bias_level level: 2<7>[ 88.900513@0] enter aml_set_bias_level level: 2<7>[ 88.900638@0] enter aml_set_bias_level level: 1<7>[ 88.900730@0] enter aml_set_bias_level level: 2<4>[ 88.900997@0] speaker_events--mute =0<7>[ 88.901667@0] enter aml_set_bias_level level: 1<7>[ 88.901801@0] enter aml_set_bias_level level: 1<7>[ 107.375874@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2<6>[ 107.376131@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2 <4>[ 107.377383@0] ----aml_hw_iec958_init,runtime->rate=48000--<4>[ 107.385337@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--<4>[ 107.389705@0] iec958 mode PCM16<4>[ 107.392693@0] IEC958 16bit<4>[ 107.395335@0] hdmitx: audio: aout notify rate 48000<4>[ 107.401924@0] hdmitx: audio: aout notify size 16<4>[ 107.404789@0] hdmitx: audio: no update<6>[ 107.408521@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000<7>[ 107.414719@0] enter aml_set_bias_level level: 2<7>[ 107.414748@0] enter aml_set_bias_level level: 2<7>[ 107.414758@0] enter aml_set_bias_level level: 1<7>[ 107.414764@0] enter aml_set_bias_level level: 2<4>[ 107.414785@0] speaker_events--mute =1<7>[ 107.419560@0] enter aml_set_bias_level level: 3<7>[ 107.419574@0] enter aml_set_bias_level level: 3<6>[ 107.420180@0] [aml-i2s-dai]aiu i2s playback enable<6>[ 107.420180@0] <6>[ 107.424611@0] [aml-i2s-dai]audio_hw_958_enable 1<4>[ 107.899748@0] write pen_release: 1<4>[ 107.899918@1] CPU1: Booted secondary processor
Comments