U-Boot SPL 2025.04-g62ea9c329a0d (Apr 27 2025 - 13:52:05 +0000) phytec_eeprom_data_init: EEPROM is not flashed. Prototype? phytec_eeprom_data_setup_fallback: init failed. Trying fall back address 0x59 SOM: PCM-070-0F3243I.A3 PCB Rev.: 2 WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) SEC0: RNG instantiated Trying to boot from BOOTROM Boot Stage: Primary boot image offset 0x8000, pagesize 0x200, ivt offset 0x0 NOTICE: Do not release JR0 to NS as it can be used by HAB NOTICE: BL31: v2.12.1(release):8cf9edb-dirty NOTICE: BL31: Built : 17:09:41, Feb 28 2025 U-Boot 2025.04-g62ea9c329a0d (Apr 27 2025 - 13:52:05 +0000) CPU: NXP i.MX8MP[8] Rev1.1 A53 at 1200 MHz CPU: Industrial temperature grade (-40C to 105C) at 60C Model: PHYTEC phyBOARD-Pollux i.MX8MP DRAM: 2 GiB phytec_eeprom_data_init: EEPROM is not flashed. Prototype? phytec_eeprom_data_setup_fallback: init failed. Trying fall back address 0x59 Core: 245 devices, 30 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... Reading from MMC(1)... OK In: serial@30860000 Out: serial@30860000 Err: serial@30860000 SEC0: RNG instantiated Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SF: Detected mt25qu512a with page size 256 Bytes, erase size 64 KiB, total 64 MiB Failed to load 'Image' Booting from net ... ethernet@30be0000 Waiting for PHY auto negotiation to complete. done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 DHCP client bound to address 192.168.42.239 (3755 ms) Using ethernet@30be0000 device TFTP from server 192.168.42.1; our IP address is 192.168.42.239 Filename 'bootenv.txt'. Load address: 0x49100000 Loading: * TFTP error: 'File not found' (1) Not retrying... BOOTP broadcast 1 DHCP client bound to address 192.168.42.239 (2 ms) Using ethernet@30be0000 device TFTP from server 192.168.42.1; our IP address is 192.168.42.239 Filename 'Image'. Load address: 0x40480000 Loading: * TFTP error: 'File not found' (1) Not retrying... BOOTP broadcast 1 DHCP client bound to address 192.168.42.239 (1 ms) Using ethernet@30be0000 device TFTP from server 192.168.42.1; our IP address is 192.168.42.239 Filename 'oftree'. Load address: 0x48000000 Loading: * TFTP error: 'File not found' (1) Not retrying... WARN: Cannot load the DT u-boot=>
Comments