Pasted

Booting from disk0s2a:
/boot/kernel/kernel data=0x645800+0x1a6800 syms=[0x4+0xaca00+0x4+0x9f77a]
 Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 8 seconds... 
 Type '?' for a list of commands, 'help' for more detailed help.
loader> set vfs.root.mountfrom=ufs:/ada0s2a
loader> boot
Booting...
/boot/dtb/imx6q-hummingboard.dtb size=0x10f7c
Loaded DTB from file 'imx6q-hummingboard.dtb'.
Kernel entry at 0x12200100...
Kernel args: (null)
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #9 r321242M: Fri Jul 21 17:34:53 PDT 2017
    [email protected]:/usr/home/russellh/FreeBSD/rh-armv6/obj/arm.armv6/usr/home/russellh/FreeBSD/rh-armv6/src/sys/IMX6 arm
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
CPU: ARM Cortex-A9 r2p10 (ECO: 0x00000000)
CPU Features: 
  Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk
Optional instructions: 
  UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:2 LoUIS:2 
Cache level 1:
 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 4-way instruction cache Read-Alloc
real memory  = 1073741824 (1024 MB)
avail memory = 1035255808 (987 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
arc4random: no preloaded entropy cache
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 46,47,48 on simplebus1
simplebus3: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus3
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 44,45 on simplebus1
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 9 on simplebus0
l2cache0: cannot allocate IRQ, not using interrupt
l2cache0: Part number: 0x3, release: 0x7
l2cache0: Warning: L2 Cache should not already be active; trying to de-activate and re-initialize...
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on simplebus1
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
gic0: pn 0x39, arch 0x1, rev 0x2, implementer 0x43b irqs 160
imx_epit0: <i.MX EPIT timer> mem 0x20d0000-0x20d3fff irq 52 on simplebus1
Timecounter "EPIT" frequency 66000000 Hz quality 1000
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 8 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 50 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 51 on simplebus1
imx_usbmisc0: <i.MX USB Misc Control> mem 0x2184800-0x21849ff on simplebus3
hdmi0: <Freescale i.MX6 HDMI core> mem 0x120000-0x128fff irq 5 on simplebus0
hdmi0: HDMI controller 13:0a:a0:c1
uart0: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 66 on simplebus2
uart0: console (115200,n,8,1)
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 27,28 on simplebus1
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 29,30 on simplebus1
gpiobus1: <GPIO bus> on gpio1
gpioc1: <GPIO controller> on gpio1
gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 31,32 on simplebus1
gpiobus2: <GPIO bus> on gpio2
gpioc2: <GPIO controller> on gpio2
gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 33,34 on simplebus1
gpiobus3: <GPIO bus> on gpio3
gpioc3: <GPIO controller> on gpio3
gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 35,36 on simplebus1
gpiobus4: <GPIO bus> on gpio4
gpioc4: <GPIO controller> on gpio4
gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 37,38 on simplebus1
gpiobus5: <GPIO bus> on gpio5
gpioc5: <GPIO controller> on gpio5
gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 39,40 on simplebus1
gpiobus6: <GPIO bus> on gpio6
gpioc6: <GPIO controller> on gpio6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 42 on simplebus1
snvs0: <i.MX6 SNVS RTC> mem 0x20cc000-0x20cffff on simplebus1
snvs0: registered as a time-of-day clock, resolution 0.000030s
src0: <Freescale i.MX6 System Reset Controller> mem 0x20d8000-0x20dbfff irq 54,55 on simplebus1
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 73 on simplebus3
usbus0: EHCI version 1.0
usbus0: stop timeout
usbus0 on ehci0
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 74 on simplebus3
usbus1: EHCI version 1.0
usbus1 on ehci1
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 77,78 on simplebus3
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ffec0: Ethernet address: d0:63:b4:00:8f:19
sdhci_fsl0: <Freescale uSDHC controller> mem 0x2190000-0x2193fff irq 82 on simplebus3
mmc0: <MMC/SD bus> on sdhci_fsl0
sdhci_fsl1: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 83 on simplebus3
mmc1: <MMC/SD bus> on sdhci_fsl1
iichb0: <Freescale i.MX I2C> mem 0x21a0000-0x21a3fff irq 86 on simplebus3
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iicbus0: <unknown card> at addr 0xd0
iicbus0: <unknown card> at addr 0x14
iichb1: <Freescale i.MX I2C> mem 0x21a4000-0x21a7fff irq 87 on simplebus3
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
uart1: <Freescale i.MX UART> mem 0x21f0000-0x21f3fff irq 95 on simplebus3
fb0: <Freescale IPU> mem 0x2400000-0x27fffff irq 12,13 on simplebus0
ahci0: <i.MX6 Integrated AHCI controller> mem 0x2200000-0x2203fff irq 14 on simplebus0
ahci0: AHCI v1.30 with 1 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
hdmi0: i2c transfer failed: 2
fb0: failed to get EDID info from HDMI framer
fbd0 on fb0
VT: initialize with new VT driver "fb".
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SMS200S330G 603ABBF0> ATA8-ACS SATA 3.x device
ada0: Serial Number 50026B7258042CE2
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 28626MB (58626288 512 byte sectors)
mmc0: No compatible cards found on bus
mmcsd0: 4GB <SDHC SS04G 8.0 SN 42C850A6 MFG 04/2015 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/ada0s2a []...
Warning: bad time from time-of-day clock, system time will not be set accurately
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
random: unblocking device.
arc4random: no preloaded entropy cache
Growing root partition to fill device
Can't figure out device for: /ada0s2a
/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
ugen1.2: <vendor 0x04b4 USB2.0 Hub> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x04b4 USB2.0 Hub, class 9/0, rev 2.00/32.99, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
ugen1.3: <Logitech USB Receiver> at usbus1
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 3> on usbus1
kbd1 at ukbd0
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 3> on usbus1
Setting hostuuid: 63fc45bb-6e7b-11e7-8b64-d063b4008f19.
Setting hostid: 0x2502ff4c.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 125203 free (1763 frags, 15430 blocks, 0.5% fragmentation)
eval: mount: Device not configured
Mounting root filesystem rw failed, startup aborted
ERROR: ABORTING BOOT (sending SIGTERM to parent)!
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)
vm_fault: pager read error, pid 1 (init)