Pasted

### DISCLAIMER
### This Makefile is designed for use with the sudar Arduino.mk
### Refer to https://github.com/sudar/Arduino-Makefile
### Currently sudar version 1.5.2 (2017-01-11)
 
### PROJECT_DIR
### This is the base path to where you have created/cloned your project
PROJECT_DIR       = /home/username/Arduino
 
### AVR_GCC_VERSION
### Check if the version is equal or higher than 4.9
AVR_GCC_VERSION  := $(shell expr `avr-gcc -dumpversion | cut -f1` \>= 4.9)
 
### ARDMK_DIR
### Path to the Arduino-Makefile directory.
ARDMK_DIR         = $(PROJECT_DIR)/Arduino-Makefile
 
### ARDUINO_DIR
### Path to the Arduino application and resources directory.
ARDUINO_DIR       = /home/username/arduino-1.6.11
 
### USER_LIB_PATH
### Path to where the your project's libraries are stored.
USER_LIB_PATH     :=  $(realpath $(PROJECT_DIR)/lib)
 
### BOARD_TAG & BOARD_SUB
### For Arduino IDE 1.0.x Only BOARD_TAG is needed.
### BOARD_TAG         = mega2560 (example)
### For Arduino IDE 1.6.x Both BOARD_TAG and BOARD_SUB are needed.
### They must be set to the board you are currently using.
### Note: for the Arduino Uno, only BOARD_TAG is mandatory
### BOARD_TAG         = mega (example)
### BOARD_SUB         = atmega2560 (example)
BOARD_TAG         = attinyx5
BOARD_SUB         = 85
### For ATTinyCore
ALTERNATE_CORE    = ATTinyCore
F_CPU=8000000L
 
### MONITOR_BAUDRATE
### It must be set to Serial baudrate value you are using.
MONITOR_BAUDRATE  = 115200
 
### AVRDUDE
ISP_PORT          = /dev/ttyS0
AVRDUDE_ARD_PROGRAMMER = usbasp
AVRDUDE_ARD_BAUDRATE = 9600
### Path to avrdude directory.
AVRDUDE          = /usr/bin/avrdude
### Path to the AVR tools directory such as avr-gcc, avr-g++, etc.
AVR_TOOLS_DIR     = /home/username/arduino-1.6.11/hardware/tools/avr
 
### CFLAGS_STD
### Set the C standard to be used during compilation. Documentation (https://github.com/WeAreLeka/Arduino-Makefile/blob/std-flags/arduino-mk-vars.md#cflags_std)
CFLAGS_STD        = -std=gnu11
 
### CXXFLAGS_STD
### Set the C++ standard to be used during compilation. Documentation (https://github.com/WeAreLeka/Arduino-Makefile/blob/std-flags/arduino-mk-vars.md#cxxflags_std)
CXXFLAGS_STD      = -std=gnu++11
 
### CXXFLAGS
### Flags you might want to set for debugging purpose. Comment to stop.
CXXFLAGS         += -pedantic -Wall -Wextra
 
### MONITOR_PORT
### The port your board is connected to. Using an '*' tries all the ports and finds the right one.
MONITOR_PORT      = /dev/ttyS0
 
### CURRENT_DIR
### Do not touch - used for binaries path
CURRENT_DIR       = $(shell basename $(CURDIR))
 
### OBJDIR
### This is where you put the binaries you just compile using 'make'
OBJDIR            = $(PROJECT_DIR)/$(CURRENT_DIR)/$(BOARD_TAG)/bin
 
### Do not touch - the path to Arduino.mk, inside the ARDMK_DIR
include $(ARDMK_DIR)/Arduino.mk