$ pip install human_body_prior
Collecting human_body_prior
Downloading human_body_prior-0.8.5.0.tar.gz (27 kB)
Collecting configer>=1.2.3
Downloading configer-1.3.1.tar.gz (4.1 kB)
Collecting imageio>=2.5.0
Downloading imageio-2.9.0-py3-none-any.whl (3.3 MB)
|████████████████████████████████| 3.3 MB 5.8 MB/s
Collecting opencv-python>=4.1.0.25
Downloading opencv_python-4.5.1.48-cp38-cp38-manylinux2014_x86_64.whl (50.4 MB)
|████████████████████████████████| 50.4 MB 6.1 MB/s
Collecting pyrender
Downloading pyrender-0.1.43-py3-none-any.whl (1.2 MB)
|████████████████████████████████| 1.2 MB 7.7 MB/s
Collecting scikit-image>=0.15.0
Downloading scikit_image-0.18.1-cp38-cp38-manylinux1_x86_64.whl (30.2 MB)
|████████████████████████████████| 30.2 MB 2.7 MB/s
Requirement already satisfied: smplx in /home/mona/venv/smplifyx/lib/python3.8/site-packages (from human_body_prior) (0.1.26)
Collecting tensorboardX>=1.6
Downloading tensorboardX-2.1-py2.py3-none-any.whl (308 kB)
|████████████████████████████████| 308 kB 12.6 MB/s
Requirement already satisfied: torch>=1.1.0 in /home/mona/venv/smplifyx/lib/python3.8/site-packages (from human_body_prior) (1.7.1)
Requirement already satisfied: torchgeometry>=0.1.2 in /home/mona/venv/smplifyx/lib/python3.8/site-packages (from human_body_prior) (0.1.2)
Collecting transforms3d>=0.3.1
Downloading transforms3d-0.3.1.tar.gz (62 kB)
|████████████████████████████████| 62 kB 2.2 MB/s
Collecting trimesh
Downloading trimesh-3.9.1-py3-none-any.whl (628 kB)
|████████████████████████████████| 628 kB 1.3 MB/s
Collecting configparser
Using cached configparser-5.0.1-py3-none-any.whl (22 kB)
Requirement already satisfied: numpy in /home/mona/venv/smplifyx/lib/python3.8/site-packages (from imageio>=2.5.0->human_body_prior) (1.19.5)
Collecting pillow
Downloading Pillow-8.1.0-cp38-cp38-manylinux1_x86_64.whl (2.2 MB)
|████████████████████████████████| 2.2 MB 14.8 MB/s
Collecting PyOpenGL==3.1.0
Downloading PyOpenGL-3.1.0.tar.gz (1.2 MB)
|████████████████████████████████| 1.2 MB 7.5 MB/s
Collecting scipy
Downloading scipy-1.6.0-cp38-cp38-manylinux1_x86_64.whl (27.2 MB)
|████████████████████████████████| 27.2 MB 291 kB/s
Collecting networkx
Downloading networkx-2.5-py3-none-any.whl (1.6 MB)
|████████████████████████████████| 1.6 MB 9.8 MB/s
Collecting pyglet>=1.4.10
Downloading pyglet-1.5.14-py3-none-any.whl (1.1 MB)
|████████████████████████████████| 1.1 MB 11.4 MB/s
Collecting freetype-py
Downloading freetype_py-2.2.0-py3-none-manylinux1_x86_64.whl (890 kB)
|████████████████████████████████| 890 kB 6.7 MB/s
Collecting six
Using cached six-1.15.0-py2.py3-none-any.whl (10 kB)
Collecting PyWavelets>=1.1.1
Downloading PyWavelets-1.1.1-cp38-cp38-manylinux1_x86_64.whl (4.4 MB)
|████████████████████████████████| 4.4 MB 3.4 MB/s
Collecting tifffile>=2019.7.26
Downloading tifffile-2020.12.8-py3-none-any.whl (157 kB)
|████████████████████████████████| 157 kB 5.6 MB/s
Collecting matplotlib!=3.0.0,>=2.0.0
Downloading matplotlib-3.3.3-cp38-cp38-manylinux1_x86_64.whl (11.6 MB)
|████████████████████████████████| 11.6 MB 1.9 MB/s
Collecting protobuf>=3.8.0
Using cached protobuf-3.14.0-cp38-cp38-manylinux1_x86_64.whl (1.0 MB)
Requirement already satisfied: typing-extensions in /home/mona/venv/smplifyx/lib/python3.8/site-packages (from torch>=1.1.0->human_body_prior) (3.7.4.3)
Requirement already satisfied: setuptools in /home/mona/venv/smplifyx/lib/python3.8/site-packages (from trimesh->human_body_prior) (44.0.0)
Collecting decorator>=4.3.0
Using cached decorator-4.4.2-py2.py3-none-any.whl (9.2 kB)
Collecting kiwisolver>=1.0.1
Using cached kiwisolver-1.3.1-cp38-cp38-manylinux1_x86_64.whl (1.2 MB)
Collecting python-dateutil>=2.1
Using cached python_dateutil-2.8.1-py2.py3-none-any.whl (227 kB)
Collecting pyparsing!=2.0.4,!=2.1.2,!=2.1.6,>=2.0.3
Using cached pyparsing-2.4.7-py2.py3-none-any.whl (67 kB)
Collecting cycler>=0.10
Using cached cycler-0.10.0-py2.py3-none-any.whl (6.5 kB)
Building wheels for collected packages: human-body-prior, configer, transforms3d, PyOpenGL
Building wheel for human-body-prior (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /home/mona/venv/smplifyx/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-0twxk55r/human-body-prior/setup.py'"'"'; __file__='"'"'/tmp/pip-install-0twxk55r/human-body-prior/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-ic_1zoga
cwd: /tmp/pip-install-0twxk55r/human-body-prior/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for human-body-prior
Running setup.py clean for human-body-prior
Building wheel for configer (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /home/mona/venv/smplifyx/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-0twxk55r/configer/setup.py'"'"'; __file__='"'"'/tmp/pip-install-0twxk55r/configer/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-fap5qcu2
cwd: /tmp/pip-install-0twxk55r/configer/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for configer
Running setup.py clean for configer
Building wheel for transforms3d (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /home/mona/venv/smplifyx/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-0twxk55r/transforms3d/setup.py'"'"'; __file__='"'"'/tmp/pip-install-0twxk55r/transforms3d/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-d7hl0b53
cwd: /tmp/pip-install-0twxk55r/transforms3d/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for transforms3d
Running setup.py clean for transforms3d
Building wheel for PyOpenGL (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /home/mona/venv/smplifyx/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-0twxk55r/PyOpenGL/setup.py'"'"'; __file__='"'"'/tmp/pip-install-0twxk55r/PyOpenGL/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-6jspyw1w
cwd: /tmp/pip-install-0twxk55r/PyOpenGL/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
ERROR: Failed building wheel for PyOpenGL
Running setup.py clean for PyOpenGL
Failed to build human-body-prior configer transforms3d PyOpenGL
Installing collected packages: configparser, configer, pillow, imageio, opencv-python, trimesh, PyOpenGL, scipy, decorator, networkx, pyglet, freetype-py, six, pyrender, PyWavelets, tifffile, kiwisolver, python-dateutil, pyparsing, cycler, matplotlib, scikit-image, protobuf, tensorboardX, transforms3d, human-body-prior
Running setup.py install for configer ... done
Running setup.py install for PyOpenGL ... done
Running setup.py install for transforms3d ... done
Running setup.py install for human-body-prior ... done
Successfully installed PyOpenGL-3.1.0 PyWavelets-1.1.1 configer-1.3.1 configparser-5.0.1 cycler-0.10.0 decorator-4.4.2 freetype-py-2.2.0 human-body-prior-0.8.5.0 imageio-2.9.0 kiwisolver-1.3.1 matplotlib-3.3.3 networkx-2.5 opencv-python-4.5.1.48 pillow-8.1.0 protobuf-3.14.0 pyglet-1.5.14 pyparsing-2.4.7 pyrender-0.1.43 python-dateutil-2.8.1 scikit-image-0.18.1 scipy-1.6.0 six-1.15.0 tensorboardX-2.1 tifffile-2020.12.8 transforms3d-0.3.1 trimesh-3.9.1
Comments