MDC_Tunnel_Liner

Lua |

3.62 KB

None

0 👍

0 👎

Raw Download Clone Embed Print View

-- This program creates a tunnel liner to facilitate mining via 5 x 5 tunnels
-- Pastebin code = "yqYhZdbF"; Pastebin name is "MDC_Tunnel_Liner"
 
-- Place the turtle down on the right-forward end of the tunnel cut.
-- Place coal into Turtle slot #14 to assure adequate fueling
-- Place stone into Turtle slot #15 and #16 to assure adequate placement resources
-- This program begins by asking you how many two-block sections you want to cut
 
local function mv_fwd() -- This function moves the turtle forward one block
    if turtle.detect() then turtle.dig(); turtle.forward() else turtle.forward() end
    end
 
local function mv_up() -- This function moves the turtle up one block
    if turtle.detectUp() then turtle.digUp(); turtle.up() else turtle.up() end
    end
 
local function mv_dwn() -- This function moves the turtle down one block
    if turtle.detectDown() then turtle.digDown(); turtle.down() else turtle.down() end
    end
 
local function sel_slot() -- This function selects the active slot for placing blocks
    turtle.select(15)
    if turtle.getItemCount() < 3 then turtle.select(16) end
    end
 
local function place_fwd() -- This function places a block if none is present in front of the turtle
    if not turtle.detect() then sel_slot(); turtle.place() end -- check forward and place
    end
 
local function place_up()
    if not turtle.detectUp() then sel_slot(); turtle.placeUp() end -- check up and place
    end
 
local function place_dwn()
    if not turtle.detectDown() then sel_slot(); turtle.placeDown() end -- check down and place
    end
 
if turtle.getFuelLevel() < 200 then
    print( "Your fuel level is less than 200; refueling with 240." )
    turtle.select(14); turtle.refuel(3)
    end
 
text_input = { ... } -- Obtain the number of two-block sections desired
 
print ( "Checking Data Entered." )
 
if ( tonumber( text_input[1] ) < 1 ) then
    print( "Error: You must respond with a positive number." )
    return
    end
 
desired_sets = tonumber( text_input[1] )
desired_height = 5
desired_width = 5
 
while desired_sets > 0 do
 
    for iter1 = 1, desired_sets do -- Cut a hallway for the desired length while filling sides
 
        mv_fwd(); turtle.turnRight() -- Position turtle for initial cutting and placing
 
        for iter2 = 1, ( desired_height + 1 ) do -- Cut and place blocks up right side
            place_fwd(); mv_up()
        end
 
        turtle.turnLeft(); turtle.turnLeft(); -- Position turtle for cutting and placing on top of tunnel
        mv_dwn(); mv_dwn()
 
        for iter3 = 1, ( desired_width + 1 ) do -- Cut and place blocks across the top
            place_up(); mv_fwd()
        end
 
        turtle.turnLeft(); turtle.turnLeft(); mv_fwd(); mv_fwd(); turtle.turnLeft(); turtle.turnLeft();
 
        for iter4 = 1, desired_height do -- Cut and place blocks down the left side
            if not ( iter4 == desired_height ) then place_fwd(); mv_dwn() else place_fwd() end
        end
 
        turtle.turnRight(); mv_fwd(); turtle.turnLeft()  -- Position turtle for cutting and placing up the left side
 
        for iter5 = 1, ( desired_height + 1 ) do -- Cut and place blocks up the 2nd left side
            place_fwd(); mv_up()
        end
 
        turtle.turnRight(); turtle.turnRight(); mv_dwn(); mv_dwn()
 
        for iter6 = 1, ( desired_width + 1 ) do -- Cut and place blocks back across the top
            place_up(); mv_fwd()
        end
 
        turtle.turnLeft(); turtle.turnLeft(); mv_fwd(); mv_fwd(); turtle.turnLeft(); turtle.turnLeft();
 
        for iter4 = 1, desired_height do -- Cut and place blocks down the right side
            if not ( iter4 == desired_height ) then place_fwd(); mv_dwn() else place_fwd() end
        end
 
 
        turtle.turnLeft(); desired_sets = ( desired_sets - 1 )
 
    end
 
end
 
print( "The program has ended successfully." )

Comments

01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎
01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎
01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎
01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎
01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎
01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎

CSS |

0 B

0 👍

0 👎

Raw Download Clone Embed Print View

✅ Leaked Exploit Documentation:
 
https://docs.google.com/document/d/1dOCZEHS5JtM51RITOJzbS4o3hZ-__wTTRXQkV1MexNQ/edit?usp=sharing
 
This made me $13,000 in 2 days.
 
Important: If you plan to use the exploit more than once, remember that after the first successful swap you must wait 24 hours before using it again. Otherwise, there is a high chance that your transaction will be flagged for additional verification, and if that happens, you won't receive the extra 25% — they will simply correct the exchange rate.
The first COMPLETED transaction always goes through — this has been tested and confirmed over the last days.
 
Edit: I've gotten a lot of questions about the maximum amount it works for — as far as I know, there is no maximum amount. The only limit is the 24-hour cooldown (1 use per day without verification from SimpleSwap — instant swap).

01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎
01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎
01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎
01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎
01/01/70 12:00:00 AM UTC
Plain Text |
0 B
|
👍
/
👎

Pasted

MDC_Tunnel_Liner

Comments